W10 - Computer freezes completely, cuts all input/power to USB devices

Page 1 of 2 12 LastLast

  1. Posts : 8
    Windows 10
       #1

    W10 - Computer freezes completely, cuts all input/power to USB devices


    Windows version 1903

    My computer freezes while gaming. It ONLY happens when I'm playing games.. Randomly, The screen will freeze, lights and input to USB devices (mouse and keyboard) cut completely, and theres nothing I can do except hard-reboot my computer by holding down the power button. I've been checking the event viewer for a while now, trying to figure this out without asking for help. I've even re-installed windows to try and rid this problem.

    I have two SSD's in RAID not sure if that matters... But I have all my games on an external HD. My CPU is watercooled, and It never gets above 85 Fahrenheit, So I really don't think overheating is the issue.

    This most recent time that it happened, which was about twenty minutes ago, I was playing a game and it crashed, and then my computer just had a solid beep, I don't think there were any short ones, or any variations of the beeping whatsoever. It was just a solid beep, nonstop until reboot.

    Event viewer has a log seemingly at the time of the crash, Which says,

    "A problem has occurred with one or more user-mode drivers and the hosting process has been terminated. This may temporarily interrupt your ability to access the devices."

    And then on the same tick, also has

    "The device HID-compliant headset (location (unknown)) is offline due to a user-mode driver crash. Windows will attempt to restart the device 5 more times. Please contact the device manufacturer for more information about this problem."

    This makes me think the crashes are somehow related to my Razer Kraken USB-Gaming headset.. But I'm honestly clueless at this point. I've tried re-seating my graphics card, and that's it. I haven't tried to clear CMOS, or re-seat RAM.
      My Computer


  2. Posts : 392
    W10
       #2

    Try one of these free temperature monitors. Check all temps, especially CPU and video card.
    SpeedFan: Download SpeedFan - Access temperature sensor in your computer
    HWMonitor: HWMONITOR | Softwares | CPUID
    HWInfo: Free Download HWiNFO Sofware | Installer & Portable for Windows, DOS

    Let us know the results (especially just before the freeze) and we'll move on from there

    Antec 690LC device does not have drivers installed.
    Please download and install the latest, W10 compatible drivers for this device

    Please do the following. It'll provide a sortable view of all the errors in Event Viewer for us to look at after you zip it and upload it:
    Please do the following:
    - open Event Viewer (run eventvwr.msc from the "Run" dialog)
    - expand the Custom Views category (left click on the > next to the words "Custom Views")
    - right click on the "Administrative Events" heading
    - select "Save all Events in Custom View as..."
    - save the file as Admin.evtx
    - zip up the file (right click on it, select "Send to", select "Compressed (zipped) folder")
    - upload it with your next post (if it's too big, then upload it to a free file-hosting service and post a link here).

    FYI - If we're looking for Event ID 41 errors (unexplained shutdowns), there's more info on that here: http://support.microsoft.com/kb/2028504
    The Event ID 41 error is simply Windows saying that it doesn't know why it shutdown.
      My Computer


  3. Posts : 8
    Windows 10
    Thread Starter
       #3

    I installed speed fan, the only thing that strikes me as high under idle is one of the SSD's... It says it's running at 97c. Not sure how that can be right, the other one is only at 30c. I ran a gpu stress test for about ten minutes or so last night, and no shutdown/stuttering or anything of that nature occurred. I DO have my CPU overclocked, but I've tried without OC and this still happens.

    I did end up getting the 690LC driver installed... It was for an NZXT watercooler, Which seems to be working good now.. Doubt that it fixed the crashing, but I guess its possible?
      My Computer


  4. Posts : 8
    Windows 10
    Thread Starter
       #4

    This issue is still happening. I went a good while without it crashing, but it's happening again.

    The device HID-compliant headset (location (unknown)) is offline due to a user-mode driver crash. Windows will attempt to restart the device 5 more times. Please contact the device manufacturer for more information about this problem.
    Can someone direct me to where I can get more help please?
      My Computer


  5. Posts : 39,955
    windows 10 professional version 1607 build 14393.969 64 bit
       #5

    Unfortunately it was a user mode crash and this requires contacting the manufacturer or switching hardware.

    In the BSOD forum we can debugg Windows driver crashes.

    For user mode it requires a different database.


    Approximately 10 BIOS upgrades were missed.

    Please upgrade the BIOS: 1702 > 3801
    Z170-AR Driver & Tools | Motherboards | ASUS USA


    Improved system performance.
    Updated Intel CPU microcode.
    Improved DRAM compatibility.

    Fixed SAMSUNG M.2 device issue.
    Fixed SanDisk M.2 device issue.
    Fixed AMD RADEON SSD device issue.
    Improved DRAM compatibility.

    MEUpdateTool
    Intel has identified security issue that could potentially place impacted platform at risk. Use ME Update tool to update your ME.
    *We suggest you update ME Driver to the latest Version 11.7.0.1040 simultaneously.
    Please download the file and check the MD5 code first.


    1.Update new CPU microcode
    2.Fixed Raid Card issue.
    3.Improved system stability and performance.
    4.Improved VGA cards and storage device compatibility


    1.Improved System Performance
    2.Modified OA key function in legacy OS
    3.Fixed some PS/2 devices connection issue in win8/win10 when fast startup is enabled

    Modified OA key function legacy OS

    Improve system stability

    etc
      My Computer


  6. Posts : 8
    Windows 10
    Thread Starter
       #6

    zbook said:
    Unfortunately it was a user mode crash and this requires contacting the manufacturer or switching hardware.

    In the BSOD forum we can debugg Windows driver crashes.

    For user mode it requires a different database.
    Thank you for your response. Is there any way I can force windows to find out/tell me what hardware in my PC is causing this?
      My Computer


  7. Posts : 39,955
    windows 10 professional version 1607 build 14393.969 64 bit
       #7

    Please upgrade the BIOS.
    The prior post was edited before seeing your post,
      My Computer


  8. Posts : 39,955
    windows 10 professional version 1607 build 14393.969 64 bit
       #8

    Open device manager > click view > click show hidden devices > manually expand all rows > look for any row displaying a yellow triangle with black exclamation mark or unknown device. Post images into the thread.

    Consider opening a thread in https://www.tenforums.com/drivers-hardware/ as they may have different resources.

    Once the BIOS is upgraded test the computer for changes in performance / stability.




    1) Open administrative command prompt and type or copy and paste:
    2) sfc /scannow
    3) dism /online /cleanup-image /scanhealth
    4) dism /online /cleanup-image /restorehealth
    5) sfc /scannow
    6) chkdsk /scan
    7) wmic recoveros set autoreboot = false
    8) wmic recoveros set DebugInfoType = 7
    9) bcdedit /enum {badmemory}

    10) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread

    11) Make sure that there is no over clocking while troubleshooting.

    12) Read these links on Windows driver verifier: (learn the reset and bootmode commands) ( do not use the tool until it is communicated in the thread)

    Enable and Disable Driver Verifier in Windows 10
    https://answers.microsoft.com/en-us/...3-c48669e4c983

    13) Update the specs in the "My Computer" section:

    System Specs - Fill in at Ten Forums
    In the left corner below in your post you find 'My System Specs'.
    After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.
    System Info - See Your System Specs - Windows 7 Help Forums

    Include PSU. cooler, case, peripherals and anything attached to the computer by wired or wireless (mouse, keyboard, headset, printer, xbox, USB wireless network card, etc.)

    14) Make sure all peripherals are listed including Razer devices.


    Code:
    - System 
    
      - Provider 
    
       [ Name]  Microsoft-Windows-DriverFrameworks-UserMode 
       [ Guid]  {2e35aaeb-857f-4beb-a418-2e6c0e54d988} 
     
       EventID 10111 
     
       Version 1 
     
       Level 1 
     
       Task 64 
     
       Opcode 0 
     
       Keywords 0x2000000000000000 
     
      - TimeCreated 
    
       [ SystemTime]  2019-10-18T04:46:05.939289400Z 
     
       EventRecordID 2231 
     
       Correlation 
     
      - Execution 
    
       [ ProcessID]  780 
       [ ThreadID]  976 
     
       Channel System 
     
       Computer DESKTOP-CDSI7IB 
     
      - Security 
    
       [ UserID]  S-1-5-18 
     
    
    - UserData 
    
      - UmdfDeviceOffline 
    
       LifetimeId {1bdc943b-3eca-4398-844d-49057e4aa2c7} 
     
       FriendlyName HID-compliant headset 
     
       Location (unknown) 
     
       InstanceId HID\VID_1532&PID_0520&MI_05&COL02\7&13C5C1A7&0&0001 
     
       RestartCount 5
    Last edited by zbook; 26 Nov 2019 at 14:50.
      My Computer


  9. Posts : 8
    Windows 10
    Thread Starter
       #9

    Microsoft Windows [Version 10.0.18362.476]
    (c) 2019 Microsoft Corporation. All rights reserved.

    C:\WINDOWS\system32>sfc /scannow

    Beginning system scan. This process will take some time.

    Beginning verification phase of system scan.
    Verification 100% complete.

    Windows Resource Protection did not find any integrity violations.

    C:\WINDOWS\system32>dism /online /cleanup-image /scanhealth

    Deployment Image Servicing and Management tool
    Version: 10.0.18362.1

    Image Version: 10.0.18362.476

    [==========================100.0%==========================] No component store corruption detected.
    The operation completed successfully.

    C:\WINDOWS\system32>dism /online /cleanup-image /restorehealth

    Deployment Image Servicing and Management tool
    Version: 10.0.18362.1

    Image Version: 10.0.18362.476

    [==========================100.0%==========================] The restore operation completed successfully.
    The operation completed successfully.

    C:\WINDOWS\system32>sfc /scannow

    Beginning system scan. This process will take some time.

    Beginning verification phase of system scan.
    Verification 100% complete.

    Windows Resource Protection did not find any integrity violations.

    C:\WINDOWS\system32>chkdsk /scan
    The type of the file system is NTFS.

    Stage 1: Examining basic file system structure ...
    391168 file records processed.
    File verification completed.
    25214 large file records processed.
    0 bad file records processed.

    Stage 2: Examining file name linkage ...
    362 reparse records processed.
    511016 index entries processed.
    Index verification completed.
    0 unindexed files scanned.
    0 unindexed files recovered to lost and found.
    362 reparse records processed.

    Stage 3: Examining security descriptors ...
    Security descriptor verification completed.
    59925 data files processed.
    CHKDSK is verifying Usn Journal...
    33840208 USN bytes processed.
    Usn Journal verification completed.

    Windows has scanned the file system and found no problems.
    No further action is required.

    468195327 KB total disk space.
    83467588 KB in 261736 files.
    168432 KB in 59926 indexes.
    0 KB in bad sectors.
    521887 KB in use by the system.
    65536 KB occupied by the log file.
    384037420 KB available on disk.

    4096 bytes in each allocation unit.
    117048831 total allocation units on disk.
    96009355 allocation units available on disk.

    C:\WINDOWS\system32>wmic recoveros set autoreboot = false
    Updating property(s) of '\\DESKTOP-CDSI7IB\ROOT\CIMV2:Win32_OSRecoveryConfiguration.Name="Microsoft Windows 10 Home|C:\\WINDOWS|\\Device\\Harddisk0\\Partition4"'
    Property(s) update successful.

    C:\WINDOWS\system32>wmic recoveros set DebugInfoType = 7
    Updating property(s) of '\\DESKTOP-CDSI7IB\ROOT\CIMV2:Win32_OSRecoveryConfiguration.Name="Microsoft Windows 10 Home|C:\\WINDOWS|\\Device\\Harddisk0\\Partition4"'
    Property(s) update successful.

    C:\WINDOWS\system32>bcdedit /enum {badmemory}

    RAM Defects
    -----------
    identifier {badmemory}

    I upgraded the BIOS successfully, and the ME.

    The "HID-compliant headset" did have the yellow triangle before doing anything, but now everything in device manager is looking good to go.

    Corsair Strafe mk2 keyboard, logitech g502 mouse, Razer kraken tournament edition usb dongle headset, NZXT Kraken AIO cpu cooler
      My Computer


  10. Posts : 39,955
    windows 10 professional version 1607 build 14393.969 64 bit
       #10

    1) Please upload each V2 and DM:
    BSOD - Posting Instructions

    2) Make a new restore point:

    Create System Restore Point in Windows 10
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 23:16.
Find Us




Windows 10 Forums