New
#1
Multiple BSOD codes in a week; after Win10 upgrade
Hi,
I have recently upgraded from Win8 to Win10 (clean install, kept only the non-system data partition). While running Win8 it may have crashed once or twice in the past year, but nothing major. Since installing Win10 about a week ago, I've had like 6 BSOD's of varying error codes,
What's weird is that Speccy (and other temperature reporting programs) reports my CPU temperatures really low, and it jumps around a lot (one second it's 30, then 25, 22, 18...) while my room is at a temperature of 28°C. At the same time, the BIOS reports CPU temperatures around 50-55°C, and the rest of the components hover steadily around 30°C.
I've never overclocked, BIOS says the CPU is not unlocked (and I never messed around with the CPU clocks to begin with), I have the latest GPU drivers (353.62).
I have done a lot of digging around and WinDbg gives me these errors:
BugCheck 124, {0, ffffe00057321028, b0800000, 60151}
Probably caused by : AuthenticAMD
-----
BugCheck 1000007E, {ffffffffc0000005, fffff8015d657b93, ffffd001ba7f27e8, ffffd001ba7f2000}
Probably caused by : dxgmms2.sys ( dxgmms2! ?? ::NNGAKEGL::`string'+1b83 )
-----
BugCheck 50, {fffff80000000018, 0, fffff801a25124a2, 2}
*** WARNING: Unable to verify timestamp for cpuz138_x64.sys
*** ERROR: Module load completed but symbols could not be loaded for cpuz138_x64.sys
Could not read faulting driver name
Probably caused by : cpuz138_x64.sys ( cpuz138_x64+24a2 )
The PC is not even 2 years old, I really don't want it to be the CPU :( The PSU should be fine (it's a 400W and the max calculated requirement for my setup is around 330W).
I'm pretty sure the PC crashed more times than there are the minidumps, but the 4 that were written are in the attachments.
Thanks in advance for any help you guys can give me.