New
#11
Those few hardware tests are only the beginning. Therll be a lot of discussion about options for ruling out software and hardware problems (if all the previous tests pass)
Good luck!
Those few hardware tests are only the beginning. Therll be a lot of discussion about options for ruling out software and hardware problems (if all the previous tests pass)
Good luck!
1) The logs were in a foreign language and could not be scanned and read.
Please change the default language to English and upload a new V2:
https://www.tenforums.com/tutorials/...dows-10-a.html
BSOD - Posting Instructions
2) Uninstall any Symantec / Norton software using the applicable uninstall tool:
Uninstall Endpoint Protection with the CleanWipe utility
Download and run the Norton Remove and Reinstall tool
3) Make sure Windows defender is on.
4) Symantec / Norton software can be reinstalled after one week of computer stability (no BSOD and no unexpected shutdowns / restarts)
5) Uninstall the Nvidia GPU driver using DDU (display driver uninstaller)
6) Re-install the Nvidia GPU driver from the Nvidia website
7) Make sure that you check the clean install box and if available install the physx driver.
Display Driver Uninstaller Download version 18.0.1.5 (or newer version if available)
Official Display Driver Uninstaller DDU Download
Display Driver Uninstaller: How to use - Windows 7 Help Forums
Display Driver Uninstaller: How to use - Windows 7 Help Forums
Download Drivers | NVIDIA
Download Drivers | NVIDIA
8) Open administrative command prompt and type or copy and paste:
9) dism /online /cleanup-image /scanhealth
10) dism /online /cleanup-image /restorehealth
11) sfc /scannow
12) chkdsk /scan
13) wmic recoveros set autoreboot = false
14) bcdedit /enum {badmemory}
15) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread
16) Make sure that there is no over clocking while troubleshooting.
17) For any BSOD:
a) run the V2 log collector to collect new log files
b) open file explorer> this PC > C: > in the right upper corner search for: C:\Windows\memory.dmp
> if the file size is < 1.5 GB then zip > post a separate share link into the thread using one drive, drop box, or google drive
Code:Namn NVIDIA GeForce GTX 1070 PNP-enhets-ID PCI\VEN_10DE&DEV_1B81&SUBSYS_871C1043&REV_A1\4&38AB2860&0&0008 Korttyp GeForce GTX 1070, NVIDIA-kompatibel Beskrivning NVIDIA GeForce GTX 1070 RAM på kortet (1 048 576) byte Installerad drivrutin C:\Windows\System32\DriverStore\FileRepository\nvaksi.inf_amd64_1f1d733b09a1d983\nvldumdx.dll,C:\Windows\System32\DriverStore\FileRepository\nvaksi.inf_amd64_1f1d733b09a1d983\nvldumdx.dll,C:\Windows\System32\DriverStore\FileRepository\nvaksi.inf_amd64_1f1d733b09a1d983\nvldumdx.dll,C:\Windows\System32\DriverStore\FileRepository\nvaksi.inf_amd64_1f1d733b09a1d983\nvldumdx.dll Drivrutinens version 26.21.14.3086 INF-fil oem5.inf (avsnittet Section044) Färgplan Inte tillgängligt Poster i färgtabellen 4294967296 Upplösning 1920 x 1080 x 60 hertz Bitar per bildpunkt 32 Minnesadress 0xDE000000-0xDF0FFFFF Minnesadress 0xC0000000-0xD1FFFFFF Minnesadress 0xD0000000-0xD1FFFFFF I/O-port 0x0000E000-0x0000EFFF IRQ-kanal IRQ 16 I/O-port 0x000003B0-0x000003BB I/O-port 0x000003C0-0x000003DF Minnesadress 0xA0000-0xBFFFF Drivrutin C:\WINDOWS\SYSTEM32\DRIVERSTORE\FILEREPOSITORY\NVAKSI.INF_AMD64_1F1D733B09A1D983\NVLDDMKM.SYS (26.21.14.3086, 20,82 MB (21 836 032 byte), 2019-08-16 18:12)
Code:nvlddmkm.sys Wed Jul 17 14:04:33 2019 (5D2F8D61)Code:nvlddmkm nvlddmkm nvlddmkm Kernel Manual Stopped OK FALSE FALSE 11˙177˙984 8˙101˙888 0 2019-05-22 23:18:43 C:\Windows\system32\DriverStore\FileRepository\n 36˙864Code:SRTSP64.SYS Mon Jul 1 11:36:40 2019 (5D1A52B8)
Hello and thanks for responding!
Sending a new V2 report. This time hopefully in an understandable native language.
Regards
SvN
- - - Updated - - -
Link to onedrive
Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.
- - - Updated - - -
Reply to report.
Using a share link (one drive, drop box, or google drive) post the commands with the results as displayed using administrative command prompt: (see step #9)
1) Open administrative command prompt and type or copy and paste:
2) sfc /scannow
3) dism /online /cleanup-image /scanhealth
4) dism /online /cleanup-image /restorehealth
5) sfc /scannow
6) chkdsk /scan
7) wmic recoveros set autoreboot = false
8) bcdedit /enum {badmemory}
9) When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on edit then copy > paste into the thread
10) For all tests please post images into the thread.
If there are problems posting images please use share links (one drive, drop box, or google drive)
11) Run HD Tune (free version) (all drives)
HD Tune website
Post images into the thread for results on these tabs:
a) Health
b) Benchmark
c) Full error scan
12) Run Sea Tools for Windows
long generic test
Post an image of the test result into the thread
SeaTools for Windows |
Seagate
How to use SeaTools for Windows | Seagate Support US
13) Run HD Sentinel: (free or trial edition)
Hard Disk Sentinel - HDD health and temperature monitoring
Hard Disk Sentinel - HDD health and temperature monitoring
Post images of each of these tabs into the thread:
Overview tab
Temperature
SMART
Disk performance
Please make sure that you use the Microsoft snipping tool to post images of each into the thread.
Take Screenshot in Windows 10 Windows 10 General Tips Tutorials
Take Screenshot in Windows 10
Its getting so bad now I can hardly do anything without getting either a BSOD or a frozen computer. Ill try to do another V2 and see if it can be done. Managed to do that. new file attached. But really this is getting too frustrating.
Place the computer in safe mode:
Boot into Safe Mode on Windows 10
Perform the drive tests while in safe mode.
Report into the thread whether there are or are not BSOD while in safe mode.
OK I will try that.
- - - Updated - - -
SO far NO BSOD in safe mode.
I will do a new HD test in offline mode. Here is the content of the command window:
Microsoft Windows [Version 10.0.18362.295]
(c) 2019 Microsoft Corporation. All rights reserved.
C:\Users\svenn>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection found corrupt files but was unable to fix some of them.
For online repairs, details are included in the CBS log file located at
windir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log. For offline
repairs, details are included in the log file provided by the /OFFLOGFILE flag.
C:\Users\svenn>dism /online /cleanup-image /scanhealth
Deployment Image Servicing and Management tool
Version: 10.0.18362.1
Image Version: 10.0.18362.295
[==========================100.0%==========================] The component store is repairable.
The operation completed successfully.
C:\Users\svenn>dism /online /cleanup-image /restorehealth
Deployment Image Servicing and Management tool
Version: 10.0.18362.1
Image Version: 10.0.18362.295
[==========================100.0%==========================]
Error: 0x800f081f
The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see http://go.microsoft.com/fwlink/?LinkId=243077.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
C:\Users\svenn>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection found corrupt files but was unable to fix some of them.
For online repairs, details are included in the CBS log file located at
windir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log. For offline
repairs, details are included in the log file provided by the /OFFLOGFILE flag.
C:\Users\svenn>chkdsk /scan
The type of the file system is NTFS.
This service cannot be started in Safe Mode
A snapshot error occured while scanning this drive. Run an offline scan and fix.
C:\Users\svenn>wmic recoveros set autoreboot = false
Updating property(s) of '\\HRUNGNER\ROOT\CIMV2:Win32_OSRecoveryConfiguration.Name="Microsoft Windows 10 Home|C:\\Windows|\\Device\\Harddisk0\\Partition3"'
Property(s) update successful.
C:\Users\svenn>bcdedit /enum {badmemory}
RAM Defects
-----------
identifier {badmemory}
C:\Users\svenn>
- - - Updated - - -
HD Tune Pro: Micron_1100_MTFDDAK256TBN Health
ID Current Worst ThresholdData Status
(01) Raw Read Error Rate 100 100 0 0 ok
(05) Reallocated Sector Count 100 100 10 0 ok
(09) Power On Hours Count 100 100 0 831 ok
(0C) Power Cycle Count 100 100 0 1535 ok
(AB) Unknown Attribute 100 100 0 0 ok
(AC) Unknown Attribute 100 100 0 0 ok
(AD) Unknown Attribute 92 92 0 133 ok
(AE) Unknown Attribute 100 100 0 89 ok
(B7) SATA Downshift Count 100 100 0 0 ok
(B8) End To End Error Detection 100 100 0 0 ok
(BB) Uncorrectable Error Count 100 100 0 0 ok
(C2) Temperature 68 53 0 201864577056 ok
(C4) Reallocated Event Count 100 100 0 0 ok
(C5) Current Pending Sector 100 100 0 0 ok
(C6) Offline Uncorrectable 100 100 0 0 ok
(C7) Interface CRC Error Count 100 100 0 0 ok
(CA) Data Address Marker errors 92 92 1 8 ok
(CE) Flying Height 100 100 0 0 ok
(F6) Unknown Attribute 100 100 0 34929206639 ok
(F7) Unknown Attribute 100 100 0 1093915860 ok
(F8) Unknown Attribute 100 100 0 323861710 ok
(B4) Unknown Attribute 0 0 0 2056 ok
(D2) Unknown Attribute 100 100 0 0 ok
Health Status : ok
- - - Updated - - -
HD Tune Pro: ST2000DM006-2DM164 Health
ID Current Worst ThresholdData Status
(01) Raw Read Error Rate 120 99 6 241441048 ok
(03) Spin Up Time 96 96 0 0 ok
(04) Start/Stop Count 99 99 20 1594 ok
(05) Reallocated Sector Count 100 100 10 0 ok
(07) Seek Error Rate 79 60 30 93979086 ok
(09) Power On Hours Count 93 93 0 6157 ok
(0A) Spin Retry Count 100 100 97 0 ok
(0C) Power Cycle Count 99 99 20 1534 ok
(B7) SATA Downshift Count 100 100 0 0 ok
(B8) End To End Error Detection 100 100 99 0 ok
(BB) Uncorrectable Error Count 100 100 0 0 ok
(BC) Command Timeout 100 100 0 0 ok
(BD) Unknown Attribute 100 100 0 0 ok
(BE) Airflow Temperature 70 60 45 522059806 ok
(BF) G-sense Error Rate 100 100 0 0 ok
(C0) Unsafe Shutdown Count 100 100 0 27 ok
(C1) Load Cycle Count 54 54 0 93959 ok
(C2) Temperature 30 40 0 73014444062 ok
(C5) Current Pending Sector 100 100 0 0 ok
(C6) Offline Uncorrectable 100 100 0 0 ok
(C7) Interface CRC Error Count 200 200 0 0 ok
(F0) Head Flying Hours 100 253 0 112553912963004 ok
(F1) Unknown Attribute 100 253 0 3946447796 ok
(F2) Unknown Attribute 100 253 0 625151935197 ok
Health Status : ok
For all tests please post images or share links.
Link to OneDrive:
Microsoft OneDrive - Access files anywhere. Create docs with free Office Online.
The drive with errors is an external HD 1 TB G:\