DPC Watchdog Violation with xboxgip.sys driver

zbook said:

Uninstall Xbox hardware and drivers:

Perform these steps in sequence:

a) Use the built-in troubleshooter:
In Device Manager, double-click Xbox 360 Controller for Windows.
Select Troubleshoot, and then follow the steps provided.


b) Remove and then redetect the controller:
Right-click Xbox 360 Controller for Windows, and then select Uninstall.
In the Action menu, select Scan for hardware changes.


c) Try updating the driver:
Double-click Xbox 360 Controller for Windows.
On the Driver tab, select Update Driver.



For any BSOD:

a) run the V2 log collector to collect new log files

b) open file explorer> this PC > C: > in the right upper corner search for: C:\Windows\memory.dmp
> if the file size is < 1.5 GB then zip > post a separate share link into the thread using one drive, drop box, or google drive

Will test new adapter tomorrow and let you know. Thanks everyone for their help so far!

- - - Updated - - -

I just ran driver verifier with the new adapter on a different pc and i get the same error with the page fault. have not actually tested any games yet. the good thing is that this pc is now making dump files!!! https://drive.google.com/file/d/1ipA...ew?usp=sharing here is a link

In that case, many indications of damage to the controller. Can you replace a copy with another one?

For any BSOD:

a) run the V2 log collector to collect new log files

b) open file explorer> this PC > C: > in the right upper corner search for: C:\Windows\memory.dmp
> if the file size is < 1.5 GB then zip > post a separate share link into the thread using one drive, drop box, or google drive

MrPepka said:

In that case, many indications of damage to the controller. Can you replace a copy with another one?

yes seems controller is broken, even with a new adapter i just crashed in game. here are logs and dumps, the thing is that xbox controllers are expensive so i might wait till the end of the month to get a new one

070719-11171-01.dmp - Google Drive

You can also send back to the service the controller you have. It seems to me that there will be no problems with the replacement of the copy by the service

From what I see today, there has been a driver update for your graphics card (https://www.amd.com/en/support/kb/re...rad-win-19-7-1), but I do not know if installing a newer driver will help you. Honestly, I doubt it

The last crash was bugcheck 133 and windows created a memory dump.

Zip memory.dmp and post a share link into this thread.

Code:

Crash dump found at C:\Windows\MEMORY.DMP
Creation date: 07/07/2019 21:34:03
Size on disk: 1505 MB

MrPepka said:

You can also send back to the service the controller you have. It seems to me that there will be no problems with the replacement of the copy by the service

unfortunately ms do not offer service on controllers purchased without a console

- - - Updated - - -

MrPepka said:

From what I see today, there has been a driver update for your graphics card (https://www.amd.com/en/support/kb/re...rad-win-19-7-1), but I do not know if installing a newer driver will help you. Honestly, I doubt it

will update

- - - Updated - - -

zbook said:

The last crash was bugcheck 133 and windows created a memory dump.

Zip memory.dmp and post a share link into this thread.

Code:

Crash dump found at C:\Windows\MEMORY.DMP
Creation date: 07/07/2019 21:34:03
Size on disk: 1505 MB

here is a dump but i did not zip it before uploading MEMORY (1).DMP - Google Drive

- - - Updated - - -

Is it possible that the batteries powering the controller could be causing a hardware fault?

Hmm that is possible. Try replace batteries down your controller

1) Uninstall and reinstall: e1d68x64.sys
Intel(R) Ethernet Connection (2) I219-V

https://answers.microsoft.com/en-us/...0-8d22254aa1c1


2) Uninstall Norton AV using the applicable uninstall tool:
Uninstall and Reinstall Norton product using the Norton Remove and Reinstall tool

3) Make sure Windows defender is on

4) Norton AV can be reinstalled after one week of computer stability (no BSOD or unexpected shutdowns/restarts)


2) For any BSOD:

a) run the V2 log collector to collect new log files

b) open file explorer> this PC > C: > in the right upper corner search for: C:\Windows\memory.dmp
> if the file size is < 1.5 GB then zip > post a separate share link into the thread using one drive, drop box, or google drive

Code:

Name	[00000002] Intel(R) Ethernet Connection (2) I219-V
Adapter Type	Ethernet 802.3
Product Type	Intel(R) Ethernet Connection (2) I219-V
Installed	Yes
PNP Device ID	PCI\VEN_8086&DEV_15B8&SUBSYS_86721043&REV_00\3&11583659&0&FE
Last Reset	07/07/2019 21:33
Index	2
Service Name	e1dexpress
IP Address	192.168.1.8, fe80::294a:ab0f:8f35:dfd9
IP Subnet	255.255.255.0, 64
Default IP Gateway	192.168.1.1
DHCP Enabled	No
DHCP Server	Not Available
DHCP Lease Expires	Not Available
DHCP Lease Obtained	Not Available
MAC Address	‪2C:FD:A1:71:4F:26‬
Memory Address	0xF7F00000-0xF7F1FFFF
IRQ Channel	IRQ 4294967260
Driver	C:\WINDOWS\SYSTEM32\DRIVERSTORE\FILEREPOSITORY\E1D68X64.INF_AMD64_0D0901F66B76DC48\E1D68X64.SYS (12.18.9.8, 584.09 KB (598,112 bytes), 27/06/2019 01:42)

Code:

e1dexpress	Intel(R) PRO/1000 PCI Express Network Connection Driver D	c:\windows\system32\driverstore\filerepository\e1d68x64.inf_amd64_0d0901f66b76dc48\e1d68x64.sys	Kernel Driver	No	Manual	Stopped	OK	Normal	No	No

Code:

e1d68x64.sys Thu Jun  6 10:01:51 2019 (5CF92ADF)

Code:

idsvia64	IDSVia64	\??\c:\program files\norton security\nortondata\22.17.3.50\definitions\ipsdefs\20190705.061\idsvia64.sys	Kernel Driver	Yes	System	Running	OK	Normal	No	Yes

Code:

ccset_ngc	NGC Settings Manager	c:\windows\system32\drivers\ngcx64\1611030.032\ccsetx64.sys	Kernel Driver	Yes	System	Running	OK	Normal	No	Yes