Multiple different BSOD errors. Only boot if using Internal graphics

The computer has three RAM modules.
Two have the same sku.
One is mismatched.
When were the different modules installed?

Remove the mismatched module to see if there is an impact on computer instability / stability.

Code:

Location     : ChannelA-DIMM0
BankLabel    : BANK 0
Manufacturer : Kingston
MemoryType   : DDR3
FormFactor   : DIMM
Capacity     : 8GB
Speed        : 1333
Serial       : 670235F5
PartNumber   : KHX2400C11D3/8GX  
ECC          : False
TypeDetail   : {Synchronous}

Location     : ChannelA-DIMM1
BankLabel    : BANK 1
Manufacturer : 0215
MemoryType   : DDR3
FormFactor   : DIMM
Capacity     : 8GB
Speed        : 1333
Serial       : 00000000
PartNumber   : CMY16GX3M2A2400C10
ECC          : False
TypeDetail   : {Synchronous}

Location     : ChannelB-DIMM1
BankLabel    : BANK 3
Manufacturer : 0215
MemoryType   : DDR3
FormFactor   : DIMM
Capacity     : 8GB
Speed        : 1333
Serial       : 00000000
PartNumber   : CMY16GX3M2A2400C10
ECC          : False
TypeDetail   : {Synchronous}

Run memtest86+ version 5.01 for at least 8 passes.
Memtest86+ - Advanced Memory Diagnostic Tool
Memtest86+ - Advanced Memory Diagnostic Tool

This may take hours so plan to run it overnight.

a) Please make sure you use the Memtest86+ version 5.01 with the link below.
Memtest86+ - Advanced Memory Diagnostic Tool

The testing is done not by time but by passes.
The more passes the better.
There are a significant number of false negatives if fewer than 8 passes are made.
A false negative is a test pass when there is malfunctioning RAM.

Perform the testing with 16 GB RAM (matched pair).

Memtest86+ version 5.01 testing takes approximately 1 - 2 hours /GB RAM
Just 1 error is a fail and you can abort testing.
Then test 1 RAM module at a time in the same DIMM each for 8 or more passes.

b) When Memtest86+ version 5.01 has completed 8 or more passes use a camera or smart phone camera to take a picture and post an image into the thread.

Memory problems. - Microsoft Community

MemTest86+ - Test RAM | Tutorials


The computer has Windows 10 1803.
Where there failure to upgrade?
Did you want to upgrade or remain with 1803?

Consider performing an in place upgrade repair.
Repair Install Windows 10 with an In-place Upgrade | Tutorials
Start with a Windows 10 iso version 1809.
If this fails the use 1803.

Download Windows 10 ISO File | Tutorials
Download Windows 10

These may fix corruption problems.

Before major Windows upgrades we've seen problems with displayed windbg corruption and command failures.

The BIOS: Version/Date American Megatrends Inc. F5, 30.05.2014

Upgrade the BIOS F5 > F7

GA-Z97X-Gaming 3 (rev. 1.0) | Motherboard - GIGABYTE U.S.A.


Turn off Windows fast startup:

Turn On or Off Fast Startup in Windows 10 | Tutorials