Multiple BSOD before and while attempting to Install Windows 10

Page 7 of 8 FirstFirst ... 5678 LastLast
  1.    5 Days Ago #61

    Caledon Ken said: View Post
    Philc43 suggested using good SATA cables. Have you swapped cables to the boot drive? (and port)
    I did try different cables and different ports, same Resource BSOD

    EDIT: I did just try this again, and in one case I got a different BSO IRQL_NOT_LESS_OR_EQUAL
      My ComputerSystem Spec

  2.    5 Days Ago #62

    For @axe0 : Here are two new dumps, from using the Windows 10 Home 1803.

    120618-2687-01.dmp - Google Drive

    MEMORY_1.DMP - Google Drive


    I'm heading over to a friend's to see if I can use his PC to install Windows onto my drive.

    Edit: I am able to boot to Windows 10 desktop, but shortly after I got the same BSOD. After restarting, I grabbed the memory dump this BSOD created, and crashed again to a KERNEL_SECURITY_CHECK BSOD.

    Here are the two new dumps:

    120618-2359-01.dmp - Google Drive

    120618-2890-01.dmp - Google Drive
    Last edited by DevoidOfHope; 4 Days Ago at 08:57.
      My ComputerSystem Spec

  3. axe0's Avatar
    Posts : 13,818
    Windows 10 Pro
       4 Days Ago #63

    Could you keep the dumps in 1 folder and provide link to the folder in the first post, that's easier for you and us.
      My ComputersSystem Spec

  4. axe0's Avatar
    Posts : 13,818
    Windows 10 Pro
       4 Days Ago #64

    Had you tried installing on the hard drive and leaving the SSDs disconnected?

    I believe there's a pattern in the 0xE3 dumps related to IO operations, possibly implying a problem with either one of the drives or the motherboard.
      My ComputersSystem Spec

  5. Caledon Ken's Avatar
    Posts : 11,544
    Windows 10 Pro x64 Build 1803
       4 Days Ago #65

    Yes he tried that, my suggestion, results are in post #8 of this thread.
      My ComputerSystem Spec

  6. axe0's Avatar
    Posts : 13,818
    Windows 10 Pro
       4 Days Ago #66

    Was it without the SSDs connected?
      My ComputersSystem Spec

  7. Caledon Ken's Avatar
    Posts : 11,544
    Windows 10 Pro x64 Build 1803
       4 Days Ago #67

    It was supposed be.... he is using the absolute minimum to boot. OP will have to confirm but I'm very sure answer will be yes.
      My ComputerSystem Spec

  8.    4 Days Ago #68

    axe0 said: View Post
    Was it without the SSDs connected?
    The SSD's we're both disconnected, yes.

    I'll grab that folder link real quick...

    https://drive.google.com/open?id=1Wu...qiurhaWcczQmVd
      My ComputerSystem Spec

  9. axe0's Avatar
    Posts : 13,818
    Windows 10 Pro
       4 Days Ago #69

    Unless there's something wrong with the PSU, or any of the voltages (like 3.3v, 5v and 12v, vcore, memory timings/voltage and stuff) in the BIOS I am also assuming there might be something wrong with the CPU/motherboard.

    Although a Linux distribution works great on your system, Linux distributions work different as opposed to Windows and handles things differently which may be a reason why no issues occur within the Linux OS. Though, I am a bit worried about the screenshots in post 10 regarding the 'pre-fail' attributes, but I may not be reading the report right.
      My ComputersSystem Spec

  10.    4 Days Ago #70

    axe0 said: View Post
    Unless there's something wrong with the PSU, or any of the voltages (like 3.3v, 5v and 12v, vcore, memory timings/voltage and stuff) in the BIOS I am also assuming there might be something wrong with the CPU/motherboard.

    Although a Linux distribution works great on your system, Linux distributions work different as opposed to Windows and handles things differently which may be a reason why no issues occur within the Linux OS. Though, I am a bit worried about the screenshots in post 10 regarding the 'pre-fail' attributes, but I may not be reading the report right.
    Thanks for the insight. While I haven't checked the voltages with a DMM, the voltages in BIOS seemed fine.

    I'm not able to interpret the results from post 10, I see the "prefail" attributes you mentioned but I dont know the implications.

    I have elected to order a new mobo and it should be here by Monday. I found a compatible upgrade that was only ~$100, so we'll see then.

    Is there anything I can do to help now that I have limited access to Windows?
      My ComputerSystem Spec


 
Page 7 of 8 FirstFirst ... 5678 LastLast

Related Threads
Error attempting USB install, 0xc0000102 in Installation and Upgrade
Hello, I do hope I can find some help here. I am attempting to use a live install USB created with Windows Media Creation Tool to install Windows 10 on a brand new computer. We had verified that it was reading the USB ports and there were no...
Where do I even start? A client of mine came to me with their HP desktop and were saying it could not boot and restore points were not even working. I thought I would have this worked out in no time. I was wrong. Here is the details for...
Hello, i am having an ongoing issue with Window' 10's App store following the Anniversary Update Windows Store crashes after i click on any apps. I tried hitting CMD = wsreset as administrator privilege mode too but the problem still...
hello everyone. i had a pop up telling me that i have a Windows update pending and that it would run when i restarted my laptop. But, when it started, i noticed that it was reinstalling Windows 10 - which i have been running for the last...

Tags for this Thread

Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 22:08.
Find Us