Random BSOD, usually when waking up


  1. Posts : 4
    Windows 10
       #1

    Random BSOD, usually when waking up


    Can someone interpret this? I ran memtest x8 and my RAM wasn't working. BIOS is at its latest same with video card.
    Last edited by alexanderbaca; 17 Nov 2018 at 14:23.
      My Computer

  2. Ztruker's Avatar
    Posts : 13,505
    Windows 10 Pro X64 20H4 19042.746
       #2

    What do you mean " I ran memtest x8 and my RAM wasn't working."? If you had errors when you ran the test then you have defective ram and it needs to be replaced.
      My Computers


  3. Posts : 4
    Windows 10
    Thread Starter
       #3

    Whoops meant that everything was working fine lol sorry
      My Computer

  4. Ztruker's Avatar
    Posts : 13,505
    Windows 10 Pro X64 20H4 19042.746
       #4

    memtest86+ should be run for a minimum of 8 passes with no errors. Many times errors have been found in later passes. Just started looking at your stuff, more later.
      My Computers

  5. Ztruker's Avatar
    Posts : 13,505
    Windows 10 Pro X64 20H4 19042.746
       #5

    The dump shows this:
    Code:
    FAULTY_HARDWARE_CORRUPTED_PAGE (12b)
    This bugcheck indicates that a single bit error was found in this page.  This is a hardware memory error.
    Arguments:
    Arg1: ffffffffc00002c4, virtual address mapping the corrupted page
    Arg2: 0000000000000750, physical page number
    Arg3: 0000014d00981960, zero
    Arg4: ffffcc802f7e9000, zero
    Nothing else of much use in the dump. Definitely need to run memtest86+ v5.01 for a minimum of 8 passes:

    ===================================================
    Follow this tutorial: MemTest86+ - Test RAM - Windows 10 Forums

    MemTest86+ is a diagnostic tool designed to test Random Access Memory (RAM) for faults. MemTest86+ will verify that:

    • RAM will accept and keep random patterns of data sent to it
    • There are no errors when different parts of memory try to interact
    • There are no conflicts between memory addresses


    Memtest86+ runs from bootable media to isolate the RAM from the system, no other components are taken into account during the test.

    warning   Warning
    MemTest86+ needs to run for at least 8 passes to be anywhere near conclusive, anything less will not give a complete analysis of the RAM.


    If you are asked to run MemTest86+ by a Ten Forums member make sure you run the full 8 passes for conclusive results. If you run less than 8 passes you will be asked to run it again.

    Note   Note
    MemTest86+ has been known to discover errors in RAM in later passes than the eighth pass. This is for information only; if you feel there is a definite problem with the RAM and 8 passes have shown no errors feel free to continue for longer.


    Running 8 passes of MemTest86+ is a long and drawn out exercise and the more RAM you have the longer it will take. It's recommended to run MemTest86+ just before you go to bed and leave it overnight.

    Take a picture when done and post in the forum please.
      My Computers


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 22:36.
Find Us




Windows 10 Forums