BSOD at least twice a month - uncertain cause

Page 8 of 12 FirstFirst ... 678910 ... LastLast

  1. Posts : 78
    Windows 10 Pro 64 bit v1809
    Thread Starter
       #71

    @philc43

    At this time I have only used Slots #1 and #3

    I was having MEMORY_MANAGEMENT errors with DIMMs #1 and #3, but no such errors with DIMMs #2 and #4 in the same slots

    This leads me to believe that the issue lies within the RAM, not the mobo

    Therefore, is it reasonable to try to isolate whether it is DIMM #1 vs #3 by pairing one of these up with an established working DIMM (e.g., DIMM #2) using the same slots that have always been in play (i.e., #1 and #3)
      My Computer


  2. Posts : 78
    Windows 10 Pro 64 bit v1809
    Thread Starter
       #72

    Just swapped out DIMM -- currently testing #3 (which had previous caused BSOD when combined with #1) and #4 (which did not cause BSOD when combined with #2)

    Will report any BSOD (which would likely be due to #3 if they occur)

    Slots unchanged (always #1 and #3)
      My Computer

  3. philc43's Avatar
    Posts : 4,359
    64bit Win 10 Pro ver 1909 Build 18363.535 and W10 Insider Ver 2004 Build 19536
       #73

    Great progress!
      My Computers


  4. Posts : 78
    Windows 10 Pro 64 bit v1809
    Thread Starter
       #74

    Got a BSOD 5 days after testing DIMMS #3 and #4

    MEMORY_MANAGEMENT

    MEMORY.ZIP: Dropbox - MEMORY.zip - Simplify your life

    This is the 2nd time that #3 was tested and the 2nd time that it failed - I will reach out to G.Skill re: warranty

    Will start testing #1 (which previously failed in very first test) and #2 (which passed)
    BSOD at least twice a month - uncertain cause Attached Files
      My Computer


  5. Posts : 32,421
    windows 10 professional version 1607 build 14393.969 64 bit
       #75

    The memory.dmp debugging didn't display any misbehaving drivers.

    Continue testing hardware.
      My Computer


  6. Posts : 78
    Windows 10 Pro 64 bit v1809
    Thread Starter
       #76

    Got a BSOD 3 days after testing DIMMS #1 and #2

    MEMORY_MANAGEMENT again - coming out of sleep

    MEMORY.ZIP:
    https://www.dropbox.com/s/4u7cebganu9dhtv/MEMORY.zip?dl=0

    Failing DIMM combos:
    • #1 and #3
    • #3 and #4
    • #1 and #2


    Passing DIMM combos (i.e., no MEMORY_MANAGEMENT BSOD since I put them in on 12-26-18 and took them out 4-11-19):
    • #2 and #4


    Always tested on MoBo slots #1 and #3

    What should I do next?
    BSOD at least twice a month - uncertain cause Attached Files
      My Computer


  7. philc43's Avatar
    Posts : 4,359
    64bit Win 10 Pro ver 1909 Build 18363.535 and W10 Insider Ver 2004 Build 19536
       #77

    Sorry for the late reply. I think you have proved that memory modules #1 and #3 are faulty and should be returned/replaced.
      My Computers


  8. Posts : 78
    Windows 10 Pro 64 bit v1809
    Thread Starter
       #78

    No worries about late reply

    I wonder if modules #1 and #3 are truly faulty (and whether #2 and #4 were a fluke and would have BSOD'd soon enough) -- the reason is that #1 and #3 were purchased as part of two separate sets a number of years apart

    Before sending them in to G.skill, I will try out the modules in slots #2 and #4 (for the first time) in order to exclude a faulty slot #1 or #3
      My Computer


  9. Posts : 78
    Windows 10 Pro 64 bit v1809
    Thread Starter
       #79

    I set up DIMMS #1 and #2 for testing on slots #2 and #4 on 4/24.

    I just experienced a BSOD right now ~20 days later

    The message was FAULTY_HARDWARE_CORRUPTED_PAGE

    MEMORY.ZIP Link: Dropbox - MEMORY.zip - Simplify your life

    Is the error also linked to RAM? If so, I was going to try the two good sticks #2 and #4 in slots #2 and #4 just to confirm (and send #1 and #3 to GSkill)
    BSOD at least twice a month - uncertain cause Attached Files
      My Computer

  10. philc43's Avatar
    Posts : 4,359
    64bit Win 10 Pro ver 1909 Build 18363.535 and W10 Insider Ver 2004 Build 19536
       #80

    Yes, this latest error looks like a memory related error.

    Code:
    FAULTY_HARDWARE_CORRUPTED_PAGE (12b)
    This bugcheck indicates that a single bit error was found in this page.  This is a hardware memory error.
    I think you have enough evidence to return modules 1 and 3 under warranty, putting modules 2 and 4 into slots 2 and 4 should give you a good working system.
      My Computers


 

Related Threads
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 13:36.
Find Us




Windows 10 Forums