Multiple BSOD crashes during everyday use

Page 2 of 4 FirstFirst 1234 LastLast

  1. Posts : 19
    Microsoft Windows 10 Pro 64-bit 17134 Multiprocessor Free
    Thread Starter
       #11

    axe0 said:
    Please run memtest86.When MemTest86 is booted, press T to access the test selection and change 4 passes to 8 passes.How to boot MemTest86: PassMark MemTest86 - Memory Diagnostic Tool - Technical Information
    i had runned this test with 4 passes and it hasn't found any errors. I will run it with 8 passes at night
      My Computer


  2. Posts : 19
    Microsoft Windows 10 Pro 64-bit 17134 Multiprocessor Free
    Thread Starter
       #12

    axe0 said:
    Please run memtest86.When MemTest86 is booted, press T to access the test selection and change 4 passes to 8 passes.How to boot MemTest86: PassMark MemTest86 - Memory Diagnostic Tool - Technical Information
    I had runned this test, but only on 4 passes and it had 0 errors. I will run it on 8 passes during night
      My Computer


  3. Posts : 19
    Microsoft Windows 10 Pro 64-bit 17134 Multiprocessor Free
    Thread Starter
       #13

    Attachment 208336 it took only 8 hours
      My Computer


  4. Posts : 14,893
    Windows 10 Pro
       #14

    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
    The PSU, cooling and other stuff are NOT mentioned in the tool.

    In the left corner below in your post you find 'My System Specs'. After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.

      My Computers


  5. Posts : 19
    Microsoft Windows 10 Pro 64-bit 17134 Multiprocessor Free
    Thread Starter
       #15

    axe0 said:
    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely including PSU, cooling and other used stuff like mouse, keyboard, monitor, case, etc.
    The PSU, cooling and other stuff are NOT mentioned in the tool.

    In the left corner below in your post you find 'My System Specs'. After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.

    Updated it
      My Computer


  6. Posts : 14,893
    Windows 10 Pro
       #16

    I checked the dump, it says something about a USB device but doesn't specify any.
    Let's see if we can find it with driver verifier.

    Please run driver verifier using the following settings for 48 hours.
    • Special Pool
    • Force IRQL checking
    • Pool Tracking
    • Deadlock Detection
    • Security Checks
    • Miscellaneous Checks
    • Power framework delay fuzzing
    • DDI compliance checking



    Warning: driver verifier could cause boot issues and/or performance issues.



    Resetting driver verifier options (recommended in this order)
    1. In normal mode open an administrator command prompt and enter the below command
    2. In safe mode open an administrator command prompt and enter the below command
    3. On 3 boot failures, you'll boot automatically to the recovery options,
      • click Troubleshoot
      • go to the advanced options
      • choose command prompt
      • enter the below command

    4. Boot with the recovery media, see above 4 steps in option 3.
    5. Via the recovery options or recovery media, select a restore point prior enabling driver verifier

    Code:
    verifier /reset


    Crashed when running driver verifier
    1. Reset driver verifier
    2. Boot in normal mode if necessary
    3. Follow Blue Screen of Death (BSOD) Posting Instructions to provide the requested logs
      My Computers


  7. Posts : 19
    Microsoft Windows 10 Pro 64-bit 17134 Multiprocessor Free
    Thread Starter
       #17

    axe0 said:
    I checked the dump, it says something about a USB device but doesn't specify any.
    Let's see if we can find it with driver verifier.

    Please run driver verifier using the following settings for 48 hours.
    • Special Pool
    • Force IRQL checking
    • Pool Tracking
    • Deadlock Detection
    • Security Checks
    • Miscellaneous Checks
    • Power framework delay fuzzing
    • DDI compliance checking



    Warning: driver verifier could cause boot issues and/or performance issues.



    Resetting driver verifier options (recommended in this order)
    1. In normal mode open an administrator command prompt and enter the below command
    2. In safe mode open an administrator command prompt and enter the below command
    3. On 3 boot failures, you'll boot automatically to the recovery options,
      • click Troubleshoot
      • go to the advanced options
      • choose command prompt
      • enter the below command

    4. Boot with the recovery media, see above 4 steps in option 3.
    5. Via the recovery options or recovery media, select a restore point prior enabling driver verifier

    Code:
    verifier /reset


    Crashed when running driver verifier
    1. Reset driver verifier
    2. Boot in normal mode if necessary
    3. Follow Blue Screen of Death (BSOD) Posting Instructions to provide the requested logs
    I have only 4 usb ports. Printer and scanner, mouse, keyboard and headset(only for lights)

    I will do driver verifer on the next weekend.
      My Computer


  8. Posts : 19
    Microsoft Windows 10 Pro 64-bit 17134 Multiprocessor Free
    Thread Starter
       #18

    So i had BSOD during gameplay(verifier was enabled). BSOD code: KMODE_EXCEPTION_NOT_HANDLED. I did not reset driver verifier. Adding logs: Attachment 209112
      My Computer


  9. Posts : 14,893
    Windows 10 Pro
       #19

    Please download the tool from BSOD - Posting Instructions - Windows 10 Forums which is linked AFTER step 9.
      My Computers


  10. Posts : 19
    Microsoft Windows 10 Pro 64-bit 17134 Multiprocessor Free
    Thread Starter
       #20

    axe0 said:
    Please download the tool from BSOD - Posting Instructions - Windows 10 Forums which is linked AFTER step 9.
    Attachment 209121
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 00:25.
Find Us




Windows 10 Forums