Windows 10 BSOD on startup ntoskrnl.exe

Hello,

I recently have been experience BSOD ntoskrnl.exe on startup. I reinstalled windows and the same issue happens.

I have updated the main drivers and the issue is till happening. I have upload the two Minidump files.

Also im booting from the NVMe drive.

PC specs

ASUS ROG MAXIMUS X FORMULA

Intel Core i7 8700K

32GB (2x16GB) Corsair DDR4 Vengeance RGB Black

Nvidia Geforce GTX 980ti Hybrid

Samsung SSD 850 EVO 500GB

Samsung SSD 850 EVO 1TB

Samsung NVMe SSD 960 EVO 500GB

Corsair HX1200i

Acer Predator X34

Windows 10 Pro x64

Regards,

Liam

There are NO crash dump files (*.dmp) in the zip archive. Please check Windows settings below:
Configure Windows 10 to Create Minidump on BSOD
How To Configure Various Dump Files In Windows 10 - YouTube

If you are using CCleaner or other cleaning tools, deleting of memory dumps should be disabled.
CCleaner.com - System files
Alternatively, do not use cleaning tools as long as the problem is not solved.

After doing this please wait for further crashes and post a new log collector zip.

Hi BSODHunter,

Thankyou for your response, I have uploaded the minidump files.

Regards,

Liam

Windows Eventlog was also cleared:

Code:

Event[0]:
  Log Name: System
  Source: Microsoft-Windows-Eventlog
  Date: 2018-08-17T12:16:43.071
  Event ID: 104
  Task: Log clear
  Level: Information
  Opcode: Info
  Keyword: N/A
  User: S-1-5-21-2967866670-858002474-3192606424-1001
  User Name: DESKTOP-ECI9AG7\liams
  Computer: DESKTOP-ECI9AG7
  Description: 
The System log file was cleared.

For correct analyzing we need and uncleared eventlog during the period of crashes.

Hello BSODHunter,

I had ran driver verifier earlier while waiting for a response, and got driver violation RzDev 0067.sys BSOD on startup. But I couldn't get back into windows, so I reinstall windows and installed all the drivers manually. I couldn't find out what driver RzDev 0067.sys is, but I think it might be a razer driver for my mouse. So far the pc has been ok, but will monitor the issue and if it happens again, I will run the log collector tool.

Regards,

Liam

Alright, let us know if you have problems again.

Hello BSODHunter,

I got a BSOD this morning on startup, I have attached the dump folder, created by the tool.

Regards,

Liam

Hi,

I checked this and the other minidumps:

There are many different bugchecks in the dumpfiles.
The cause for different error codes are usually hardware and lower level problems.

U should begin with:

Run MemTest86+ V5.01 to analyse your RAM. MemTest86+ - Test RAM | Windows 10 Tutorials

MemTest86+ V5.01 needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure. More Info here: Memory problems. - Microsoft Community

Make a photo of the result and post it.

Since u have 32 GB installed, please pull out one 16 GB module and start memtest. When testing done please switch the modules and test the other one. Could be possible that this will run two days.

Hello BSODHunter,

Here are the test results for each ram stick. I have also uploaded a new dump folder. Also I have noticed this only happens on cold boot, and not after restarting, so once the pc has warmed up its fine.

Attachment 201410
Attachment 201411

Regards,

Liam

seems that the RAM is ok. Nevertheless theres memory corruption in the most recent dump.

Code:

0x0000001A:    MEMORY_MANAGEMENT (2018-08-27 17:17:58) [Windows 10] 
 
CAUSED BY:     memory_corruption     
 
PROCESS:       InGameManager. 
 
Usual causes:  Device driver, memory, kernel

since there are no drivers showing in the dumps and showing different crash codes, everything points to lower level problem like hardware, disks, bios, disk controller (and firmware).....

U should check the disk first:

Run HDTune (YT) to check health and scan for errors.
You can also run a disk or health check using CrystalDiskInfo (YT) or chkdsk (YT). Refer to the tutorial for details of how to do this.
Take Screenshots of it and post it here.