Fresh install "IRQL NOT LESS OR EQUAL" BSOD at random


  1. Posts : 3
    Windows 10 64bit Pro
       #1

    Fresh install "IRQL NOT LESS OR EQUAL" BSOD at random


    Hey Guy's so I have recently upgraded to an M.2 so I did a fresh Install of windows onto it. Before I had the M.2 I used to get the same BSOD but it always used to say Netio.sys which I narrowed down to Malwarebytes which seemed to work but now I don't have malware installed have barely anything installed and have the same BSOD any help would be greatly appreciated.

    Thanks
      My ComputerSystem Spec

  2.    #2

    Hi there,

    problem is, there is just one bluscreen dump. If we would have more bluescreens (dumps) it would be better for analyzing. So you should wait a few more crashes and upload a new log collector zip file.

    But there a few things u could check:

    1) Please uninstall and reinstall the graphics driver using DDU. There are pointers I found:
    Code:
    ffffdd0d`7759c4e8  fffff80c`bc224385 dxgkrnl!COREACCESS::~COREACCESS+0x4d
    ffffdd0d`7759c518  fffff80c`bc22350b dxgkrnl!COREADAPTERACCESS::~COREADAPTERACCESS+0x1b
    ffffdd0d`7759c548  fffff80c`bc2ced47 dxgkrnl!DxgkEscape+0x8c7
    Display Driver Uninstaller: How to use
    Display Driver Uninstaller (DDU) is a small software that can help the user to uninstall the display driver from the users PC. It can uninstall the driver for all the lead display chip developers, viz. Nvidia, AMD and Intel.


    2) You should check Disk #2. There are IO errors on the WD disk:
    Code:
    2018-08-08 19:58:36  Warning: The IO operation at logical block address 0x58c23b8 for Disk 2 (PDO name: \Device\00000036) was retried.   
    2018-08-08 20:01:07  Warning: The IO operation at logical block address 0x58c3a98 for Disk 2 (PDO name: \Device\00000036) was retried.   
    2018-08-08 20:01:37  Warning: The IO operation at logical block address 0x58c4d18 for Disk 2 (PDO name: \Device\00000036) was retried.   
    2018-08-08 20:02:08  Warning: The IO operation at logical block address 0x58c6498 for Disk 2 (PDO name: \Device\00000036) was retried.   
    2018-08-08 20:04:09  Warning: The IO operation at logical block address 0x58c7788 for Disk 2 (PDO name: \Device\00000036) was retried.
    Code:
    Description    Disk drive
    Manufacturer    (Standard disk drives)
    Model    WDC WDS120G2G0B-00EPW0
    Bytes/Sector    512
    Media Loaded    Yes
    Media Type    Fixed hard disk
    Partitions    3
    SCSI Bus    3
    SCSI Logical Unit    0
    SCSI Port    1
    SCSI Target ID    0
    Sectors/Track    63
    Size    111.80 GB (120,039,736,320 bytes)
    Total Cylinders    14,594
    Total Sectors    234,452,610
    Total Tracks    3,721,470
    Tracks/Cylinder    255
    Partition    Disk #2, Partition #0
    Partition Size    499.00 MB (523,239,424 bytes)
    Partition Starting Offset    1,048,576 bytes
    Partition    Disk #2, Partition #1
    Partition Size    100.00 MB (104,857,600 bytes)
    Partition Starting Offset    524,288,000 bytes
    Partition    Disk #2, Partition #2
    Partition Size    111.19 GB (119,394,009,088 bytes)
    Partition Starting Offset    645,922,816 bytes



    Fresh install "IRQL NOT LESS OR EQUAL" BSOD at random Diagnostic Test Fresh install "IRQL NOT LESS OR EQUAL" BSOD at random
     HDD TESTS

    Run HDTune to check health and scan for errors.



    Note   Note
    It may take some time, but look for signs of any errors or failure.

    You can also run a disk or health check using CrystalDiskInfo or chkdsk. Refer to the tutorial for details of how to do this.


    Take Screenshots of it and post it here.

    You can also use the original tool from WD:
    Software and Firmware Downloads | WD Support



    3) You also run a Memtest to check if the RAM modules are okay:



    Fresh install "IRQL NOT LESS OR EQUAL" BSOD at random Diagnostic Test Fresh install "IRQL NOT LESS OR EQUAL" BSOD at random
     RAM TEST

    Run MemTest86+ V5.01 to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums



    Note   Note
    MemTest86+ V5.01 needs to be run for at least 8 complete passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.

    More Info here: Memory problems. - Microsoft Community


    Make a photo of the result and post it.
    Last edited by BSODHunter; 09 Aug 2018 at 05:29.
      My ComputerSystem Spec

  3.    #3

    I rechecked. Since Disk #2 ist you new M.2 SSD you should do following:

    1. Check & Update DISK controller and storage drivers (AHCI, RAID, NVMe,...)
    2. Check SSD for new Firmware-Update

    Use this tool from WD to check the M.2 SSD:
    Software and Firmware Downloads | WD Support
      My ComputerSystem Spec


  4. Posts : 3
    Windows 10 64bit Pro
    Thread Starter
       #4

    Hi thanks for the help I've ran the Error Test Attachment 198655 And yes that's the new M.2 only a day old Also the RAM is my 2nd set as the First set I had kept crashing my System which I narrowed down so I RMA'ed. I will go ahead and use DDU and reinstall Nvidia Drivers once again thank-you.
      My ComputerSystem Spec

  5.    #5

    Allright. U should also go through steps in my post: Fresh install BSOD at random - Windows 10 Forums


    AND please download and run the newest version of HWiNFO64 and post a screenshot of the "System Summary" window here.

    Note   Note
    Check the "Summary-only" box at start.

    HWiNFO64
    Hardware Info (HWiNFO) is a powerful system information utility designed especially for detection of hardware.
      My ComputerSystem Spec


  6. Posts : 3
    Windows 10 64bit Pro
    Thread Starter
       #6

    Okay So I've went to safe mode uninstalled Display Drivers and Reinstalled them Also have the screenshot of HWinfo64 Attachment 198659 Yesterday I downloaded the WD SSD Dashboard and updated the Firmware for the M.2 to the newest so can't do anything in there and it says everything is good. how do you go about updating the Storage/Disk Controller? Thanks
      My ComputerSystem Spec


  7.    #7

    Everything looks okay. U have also the latest BIOS version.

    U can get the AHCI controller drivers from the mainboard manufacturers website.

    But newest controller driver should be integrated in the latest AMD chipset drivers from here:
    Latest AMD Chipset Drivers Released - Windows 10 Forums
      My ComputerSystem Spec


  8. Posts : 26,496
    windows 10 professional version 1607 build 14393.969 64 bit
       #8

    For the DDR4 RAM testing were you able to use Memtest86+ version 5.01?
    Memtest86+ - Advanced Memory Diagnostic Tool

    Or did you need to use Memtest86 version 7.5?
    MemTest86 - Official Site of the x86 Memory Testing Tool



    When available please take a picture and post an image into the thread.
      My ComputerSystem Spec


 

Related Threads
I'm getting random BSOD, I can't explain when or why because they are seemingly random! My specs are pretty old - I built this years ago, I honestly don't remember. cpu: Intel Q6600 (was overclocked but I've returned to stock settings) mb :...
Hello all, I've been running into a serious problem as soon as I upgraded to windows 10 on my computer. My cousin did it, so I don't really know what he did, I wish I did it my own... Anyways, I had big BSOD problems few weeks ago when I was either...
I don't remember for sure if it said ndis.sys, but I'm almost positive it was. Anyways, I get this BSOD at random times, it usually happens while I'm streaming a video on YouTube or Netflix but I'm not sure if there's any correlation since that's...
Hi everyone, I have built a new system. I will include the specs below. While gaming the computer randomly goes into blue screen. There are times when I can game up to 45 mins and other times where it goes blue screen about 5 minutes after the game...
I've been struggling with sporadic game crash issues for half a year. Not sure if it's hardware related. I posted here a few weeks back and got some help, but it didn't seem to fix the issue outright/thoroughly. So installed windows 10...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 19:51.
Find Us