Windows 10: BSOD error 0x000000124 Solved

Page 4 of 7 FirstFirst ... 23456 ... LastLast
  1.    24 Jul 2018 #31

    I know I experimented on 7/22/18 after doing all instructions on clean boot and crashed so I reinstalled windows and just kept my photos and documents or my personal files and kept full install settings, I went away today come home BSOD well I just finished doing clean boot again I got my new ram delivered today it is DDR 4 2x8 16GB 3000MHz I removed old ram and installed new sticks keeping my cpu stock but set ram XMP profile and running 3000MHz and see how it goes
    BSOD error 0x000000124 Attached Files
      My ComputersSystem Spec

  2.    25 Jul 2018 #32

    now reset all to stock ram also
    BSOD error 0x000000124 Attached Files
      My ComputersSystem Spec

  3. philc43's Avatar
    Posts : 3,590
    64bit Win 10 Pro ver 1809 Build 17763.1 and W10 Insider Build 18252
       25 Jul 2018 #33

    Still the same Internal Timer error being reported.

    Please explain what happened with the clean boot. When you tried a clean boot again with the new installation, at what point does it crash? Before you start adding services and programs back into the boot sequence?
      My ComputersSystem Spec

  4.    25 Jul 2018 #34

    [QUOTE=philc43;1421478]Still the same Internal Timer error being reported.

    Please explain what happened with the clean boot. When you tried a clean boot again with the new installation, at what point does it crash? Before you start adding services and programs back into the boot sequence?[/QUO

    I'll go with clean boot again part 2 when it shows add half of non Microsoft services it didn't seem to work as shown

    never had problems installing programs
      My ComputersSystem Spec

  5. philc43's Avatar
    Posts : 3,590
    64bit Win 10 Pro ver 1809 Build 17763.1 and W10 Insider Build 18252
       25 Jul 2018 #35

    You can add back services one a time if that would work better but it just takes longer. Do you understand the process and how it works?

    First stage is to verify that there are no crashes when all the non-Microsoft services and non-Microsoft programs are disabled. The second stage is to start adding them back in until you find the one that causes your system to crash again. So for each time you make a change to the startup configuration you have to run your system for a while to determine if it will crash or not. I do not know how long this will take but you will probably have some idea how long it normally takes before your system crashes. The tutorial suggests you add about half of them back in at a time but of course when you get to the point that it crashes you have to work out by a process of trial and error which of the programs is actually causing the system to crash.
      My ComputersSystem Spec

  6.    25 Jul 2018 #36

    philc43 said: View Post
    You can add back services one a time if that would work better but it just takes longer. Do you understand the process and how it works?

    First stage is to verify that there are no crashes when all the non-Microsoft services and non-Microsoft programs are disabled. The second stage is to start adding them back in until you find the one that causes your system to crash again. So for each time you make a change to the startup configuration you have to run your system for a while to determine if it will crash or not. I do not know how long this will take but you will probably have some idea how long it normally takes before your system crashes. The tutorial suggests you add about half of them back in at a time but of course when you get to the point that it crashes you have to work out by a process of trial and error which of the programs is actually causing the system to crash.
    ok ty resetting clean boot now
      My ComputersSystem Spec

  7.    25 Jul 2018 #37

    running on stage 1 now how long a day or two make sure no crash then stage 2 right
      My ComputersSystem Spec

  8. philc43's Avatar
    Posts : 3,590
    64bit Win 10 Pro ver 1809 Build 17763.1 and W10 Insider Build 18252
       25 Jul 2018 #38

    Howiewowie said: View Post
    running on stage 1 now how long a day or two make sure no crash then stage 2 right
    That's correct. If it normally crashes within a day that should be long enough to test.
      My ComputersSystem Spec

  9.    25 Jul 2018 #39

    must have a Microsoft windows problem it just crashed but did not leave a dump file
      My ComputersSystem Spec

  10. philc43's Avatar
    Posts : 3,590
    64bit Win 10 Pro ver 1809 Build 17763.1 and W10 Insider Build 18252
       25 Jul 2018 #40

    Howiewowie said: View Post
    must have a Microsoft windows problem it just crashed but did not leave a dump file
    Did you see if the BSOD showed which code it was?
      My ComputersSystem Spec


 
Page 4 of 7 FirstFirst ... 23456 ... LastLast

Related Threads
BSOD on random times,error 0x000000124 in BSOD Crashes and Debugging
Hello everyone..I have a reccuring problem with my second pc. I get BSOD on random times (when i play games or when i watch videos or i just using the web). It was happening from the start and i thought it was from an old vga that i had,so i ...
As the title says this is the first actual BSOD error i've gotten on this computer since upgrading to Win 10 which was over a year ago. And probably only the 5th time i've ever gotten a BSOD on this computer. It happened in the middle of playing...
Hello, so i think i have dealt with this bluescreen 3times now, and it seemed to have gone away after i went from my amd system to intel. But now its there again. The most useful function ever, wake from sleep, is now bluescreening my computer. I...
Solved Random BSOD error Page Error in Non Paged Area in BSOD Crashes and Debugging
Hi, I have started getiing random BSOD atlaest 5-7 times today on my laptop. It just says Page File error in non paged area evrytime. The laptop is fairly new and used very mildly. Please guide what to do.
Hi, i got this computer about 3~ Weeks ago, and have gotten random BSOD's after that. System Information Bellow Intel Core i5-6600K 3.5Ghz @ 3.5 GeForce GTX960 2gb GDDR5, Physx CUDA 1TB Harddisk 7200RPM 8Gb DDR4 2133Mhz Dual Channel, 2x4gb...

Tags for this Thread

Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 06:06.
Find Us