Windows 10: Being Logged Out with Windows 10 v1803 Solved

Page 5 of 7 FirstFirst ... 34567 LastLast

  1. Posts : 20,730
    windows 10 professional version 1607 build 14393.969 64 bit
       11 May 2018 #41

    These are stress tests to find misbehaving drivers and malfunctioning hardware.
    A clean install should fix all problematic drivers as fresh driers are installed.
    Somehow there was a problem in the computer environment (the combination of the all the different software and hardware).
    Once Windows driver verifier has gone 36 hours without BSOD there should be more comfort for regular use conditions.


    Aim to keep temperatures < 90 - 95 degrees and the lower the better.
    Temporary spikes are OK.
    Please make sure the fans are clean and that there is no dust build up.

    NVIDIA GPU maximum operating temperature and overheating | NVIDIA

    Intel Xeon E3-1505M v6
      My ComputerSystem Spec

  2. ericnixmd's Avatar
    Posts : 270
    Windows 10 Pro for Workstations
    Thread Starter
       14 May 2018 #42

    Definitely need to do some hardware checking. Unfortunately will be a couple weeks before I can do it. I turned off verifier and still had a memory related crash (uploaded new log to usual place).

    OneDrive
      My ComputerSystem Spec


  3. Posts : 20,730
    windows 10 professional version 1607 build 14393.969 64 bit
       14 May 2018 #43

    The troubleshooting steps were not followed:
    Please run the Memtest86+ version 5.01 with 1 RAM module at a time.
    Malwarebytes was supposed to be uninstalled in post #9 step #7.
    Malwarebytes was not to be reinstalled per post #13.
    How come it was reinstalled?
    Please uninstall Malwarebytes using the applicable uninstall tool.
      My ComputerSystem Spec

  4. ericnixmd's Avatar
    Posts : 270
    Windows 10 Pro for Workstations
    Thread Starter
       14 May 2018 #44

    zbook said: View Post
    The troubleshooting steps were not followed:
    Please run the Memtest86+ version 5.01 with 1 RAM module at a time.
    Malwarebytes was supposed to be uninstalled in post #9 step #7.
    Malwarebytes was not to be reinstalled per post #13.
    How come it was reinstalled?
    Please uninstall Malwarebytes using the applicable uninstall tool.
    Unfortunately it's required. So as long as I'm using the laptop for work, it has to be installed. When I get a break where I can be without the laptop for a few days, then I will uninstall it again and do the memory testing and resume troubleshooting.

    Sorry, but unfortunately I do not have another laptop to use for dictation at work.
      My ComputerSystem Spec


  5. Posts : 20,730
    windows 10 professional version 1607 build 14393.969 64 bit
       14 May 2018 #45

    Malwarebytes was reinstalled on 5/11/2018 and was the cause of BSOD on 5/14/2018.

    The misbehaving drivers were:
    farflt.sys
    mbamchameleon.sys

    farflt.sys
    Malwarebytes Anti-Ransomware Protection
    Downloads: Free Antivirus Replacement & Anti-Malware Tool | Malwarebytes
    Support: Customer Support & Help Center | Malwarebytes


    mbamchameleon.sys
    Malwarebytes Chameleon Protection Driver
    Chameleon - Free Malware Removal Tool | Malwarebytes




    Update this Intel driver: iastoravc.sys Intel Chipset SATA RAID Controller


    Code:
    Name    Intel Chipset SATA RAID Controller
    Manufacturer    Intel Corporation
    Status    OK
    PNP Device ID    PCI\VEN_8086&DEV_2822&SUBSYS_07A91028&REV_31\3&11583659&0&B8
    Memory Address    0xED1C0000-0xED1C7FFF
    Memory Address    0xED1D9000-0xED1D90FF
    I/O Port    0x0000F090-0x0000F097
    I/O Port    0x0000F080-0x0000F083
    I/O Port    0x0000F060-0x0000F07F
    Memory Address    0xED100000-0xED17FFFF
    IRQ Channel    IRQ 4294967294
    IRQ Channel    IRQ 4294967293
    IRQ Channel    IRQ 4294967292
    IRQ Channel    IRQ 4294967291
    IRQ Channel    IRQ 4294967290
    IRQ Channel    IRQ 4294967289
    IRQ Channel    IRQ 4294967288
    IRQ Channel    IRQ 4294967287
    IRQ Channel    IRQ 4294967286
    Driver    c:\windows\system32\drivers\iastoravc.sys (15.44.0.1010, 864.40 KB (885,144 bytes), 04/11/2018 07:33 PM)



    Code:
    iastoravc    Intel Chipset SATA RAID Controller    c:\windows\system32\drivers\iastoravc.sys    Kernel Driver    Yes    Boot    Running    OK    Normal    No    Yes



    Code:
    iaStorAVC.sys Wed Feb 07 05:53:36 2018 (5A7AE8C0)
      My ComputerSystem Spec

  6. ericnixmd's Avatar
    Posts : 270
    Windows 10 Pro for Workstations
    Thread Starter
       14 May 2018 #46

    Updated the drivers, uninstalled Malwarebytes (again). Will risk what IT says if they happen to catch me, but doubt they will.

    Ran the GPU test. I couldn't get it to run on the Intel GPU. Is there a way to select it?

    Click image for larger version. 

Name:	Nvidia.jpg 
Views:	6 
Size:	247.9 KB 
ID:	188728
      My ComputerSystem Spec


  7. Posts : 20,730
    windows 10 professional version 1607 build 14393.969 64 bit
       14 May 2018 #47

    See if you can find BIOS Optimus settings.

    These are three methods that may enable only Intel GPU or iGPU testing:
    a) Open the BIOS and look for Optimus settings > modify settings so that Nvidia GPU or dGPU is off.
    b) Remove the Nvidia GPU from the computer
    c) Modify the Nvidia control panel

    These are two methods that may enable only Nvidia GPU testing:
    a) Open the BIOS and look for Optimus settings > modify settings so that Intel GPU or iGPU is off.
    b) Modify the Nvidia control panel

    Please post into the thread:
    a) maximum temperature
    b) test duration
      My ComputerSystem Spec

  8. ericnixmd's Avatar
    Posts : 270
    Windows 10 Pro for Workstations
    Thread Starter
       14 May 2018 #48

    Had another crash while performing perf95. Didn't seem like the temps were up. Uploaded the logs.

    I'm trying to find alternative arrangements to dictate at work so I can perform the memory test. If I can't, it'll be 2 weeks before I can.

    The Nvidia temp was maxed at 66 degrees with >8 hours of runtime (like 8hours15mins).
      My ComputerSystem Spec


  9. Posts : 20,730
    windows 10 professional version 1607 build 14393.969 64 bit
       14 May 2018 #49

    For GPU testing what was the test duration?
    Did you have a BSOD during Prime95 testing?
    Please post a BETA zip and a memory dump.
      My ComputerSystem Spec

  10. ericnixmd's Avatar
    Posts : 270
    Windows 10 Pro for Workstations
    Thread Starter
       14 May 2018 #50

    zbook said: View Post
    For GPU testing what was the test duration?
    Did you have a BSOD during Prime95 testing?
    Please post a BETA zip and a memory dump.
    Yes, BSOD during Prime95 testing. Beta zip and memory dumps are posted at OneDrive

    The GPU testing was done for >8 hours (like 8 hours and 15 minutes).
      My ComputerSystem Spec


 
Page 5 of 7 FirstFirst ... 34567 LastLast

Related Threads
Hello, after updating to v1803 these two errors occur: AppReadiness ID 10: Operation Appx 'RemovePackageAsync' in 'Windows.MiracastView_6.3.0.0_neutral_neutral_cw5n1h2txyewy' failed for user 'user@hotmail.it' - Unable to perform the deployment...
I have been using Windows 10 Pro across several builds on an i7-4770K PC that was built in 2013 but has been upgraded since, mainly graphics cards of which the current one is the GTX 1080 Ti using the latest v391.35 drivers from NVIDIA. All Windows...
Hey there i'm on v1803.. (i'm not an Insider) But how can i manually install KB4100375 (OS Build 17133.73).. i have tryed with Cab file's and Always gets errors.. or is it better to just wait when the Official RTM (ISO.) comes available on MCT...
when i log off windows says other user logged in may los... in AntiVirus, Firewalls and System Security
so I really don't no whether this is a sign of a virus or not (I really don't know a lot about these things) but a few things: -when I logged off (to shut down) from my only account it said warning other users logged in my lose their work! -the...
Only on user logged in with Windows 10? in User Accounts and Family Safety
How do I get it done with gpo that only one user can be logged in with Windows 10?
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 05:50.
Find Us