Windows 10: BSOD's related to memory / drivers, increasing in frequency

Page 15 of 15 FirstFirst ... 5131415

  1. Posts : 19,412
    windows 10 professional version 1607 build 14393.969 64 bit
       1 Week Ago #141

    1) If the computer has Ccleaner > click windows tab > scroll down to system and advanced > post an image into the thread

    2) In the left lower corner search type: system or system control > open system control panel > on the left pane click advanced system settings
    a) > on the advanced tab under startup and recovery > click settings > post an image of the startup and recovery into the thread.
    b) > on the advanced tab under performance > click on settings > under performance options > click on the advanced tab > under virtual memory > click on change > post an image of the virtual memory tab into the thread

    3) Run memtest86+ version 5.01 for at least 8 passes.
    Memtest86+ - Advanced Memory Diagnostic Tool
    This may take hours so plan to run it overnight.
    a) Please make sure you use the Memtest86+ version 5.01 with the link below.
    Memtest86+ - Advanced Memory Diagnostic Tool
    The testing is done not by time but by passes.
    The more passes the better.
    There are a significant number of false negatives if fewer than 8 passes are made.
    A false negative is a test pass when there is malfunctioning RAM.
    There is 8 GB of RAM on the computer.
    Memtest86+ version 5.01 testing takes approximately 1 - 2 hours /GB RAM
    Just 1 error is a fail and you can abort testing.
    Then test 1 RAM module at a time in the same DIMM each for 8 or more passes.
    b) When Memtest86+ version 5.01 has completed 8 or more passes use a camera or smart phone camera to take a picture and post an image into the thread.
    MemTest86+ - Test RAM
      My ComputerSystem Spec

  2.    1 Week Ago #142

    CCleaner settings:
    Click image for larger version. 

Name:	ccleaner1.JPG 
Views:	15 
Size:	17.8 KB 
ID:	199101

    Startup and Recovery Settings:
    Click image for larger version. 

Name:	startup_and_recovery.JPG 
Views:	15 
Size:	47.2 KB 
ID:	199102

    I have already run Memtest86+ 5.01 with each RAM stick in each slot on the motherboard for at least 10 passes each, some as high as 32. No errors were found in any of the eight tests.
      My ComputerSystem Spec

  3. Posts : 19,412
    windows 10 professional version 1607 build 14393.969 64 bit
       1 Week Ago #143

    For Ccleaner uncheck:
    a) Windows Log Files

    For startup and recovery system failure:
    a) uncheck automatically restart
    b) reboot

    Memtest is faster that Memtest86+ version 5.01.
    They have different algorithms.
    This is to doublecheck the RAM / DIMM / MB
    The testing can be performed overnight.
    Run Memtest version 7.5 and post images of the test results into the thread.
    MemTest86 - Official Site of the x86 Memory Testing Tool

    For any BSOD post:
    a) a new BETA log collector zip
    b) c:\windows\memory.dmp > zip > one drive or drop box share link
      My ComputerSystem Spec

Page 15 of 15 FirstFirst ... 5131415

Related Threads
BSOD Occurring with increasing frequency in BSOD Crashes and Debugging
Hope someone will be able to decipher what the issue is, I have looked at dump files but they all seem to point to: Analysis Inconclusive :confused: Please see attached. Kind regards, Rob
Started a month ago went 3 weeks no BSOD about 3 days ago 2 in one week since then it has been every hour or so while playing a game called eve online. Although I cant confirm this to be contributing to the failure (as I mostly am playing this...
we have windows 10 of a new hp pc prodesk 400 g3 mt business pc. we cannot identify the problem.. we used the hp drivers software and fully updated windows 10 and the latest drivers. Please recommend troubleshooting steps what is causing the...
BSOD 32 bit memory related in BSOD Crashes and Debugging
I'm getting a BSOD predictably, but not every single time. I'm using an audio recording program - Sonar Platinum. It has a 32 bit and a 64 bit version. I'm in the process of shifting over to 64 bit, yet sometime I still need to open a project in...
Since up loading to 10, I have had a few BODS some with or without a warning message that there is insufficient memory space, but memory diagnostics show no issues. Here are the dumps from two of the latest incidents: 29213 29212
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 03:51.
Find Us