New
#1
BSOD Unexpected Kernel Mode Trap caused by driver hal.dll
Hi,
I've been getting this error sporadically in the last couple of months. Any help is greatly appreciated!
Hi,
I've been getting this error sporadically in the last couple of months. Any help is greatly appreciated!
Hello cosh39 and welcome to tenForums :)
The crash dump indicates a potential problem with the driver for the ThreatTrack Security Firewall:
sbwfw.sys Thu Oct 29 06:09:52 2015 (563228B0)Code:STACK_TEXT: fffff801`07bfcd08 fffff801`0541a529 : 00000000`0000007f 00000000`00000008 fffff801`07bfce50 ffff8e02`75aa1ff0 : nt!KeBugCheckEx fffff801`07bfcd10 fffff801`05414d4f : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69 fffff801`07bfce50 fffff801`05215db2 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDoubleFaultAbort+0x38f ffff8e02`75aa1ff0 fffff801`052156df : fffff7e3`80001910 00000000`0000002f fffff801`038c66e0 fffff80e`f4d80000 : hal!HalpApicRequestInterrupt+0x162 ffff8e02`75aa2060 fffff801`0540938e : ffff978b`931be620 fffffff6`00000002 fffff7e3`80001910 fffff801`05216356 : hal!HalRequestSoftwareInterrupt+0xaf ffff8e02`75aa22c0 fffff801`05540158 : 00000000`00000fff 00000000`00001001 00000000`00000000 fffff801`05409355 : nt!KiInterruptDispatchNoLockNoEtw+0xbe ffff8e02`75aa2450 fffff80e`f6b9e757 : ffff8e02`75aa4880 ffff8e02`75aa25c0 00000000`00000000 ffff978b`6d436653 : nt!ExAllocatePoolWithTag+0x148 ffff8e02`75aa2550 ffff8e02`75aa4880 : ffff8e02`75aa25c0 00000000`00000000 ffff978b`6d436653 ffff8e02`75aa4720 : sbwfw+0xe757 ffff8e02`75aa2558 ffff8e02`75aa25c0 : 00000000`00000000 ffff978b`6d436653 ffff8e02`75aa4720 fffff80e`f6b9f660 : 0xffff8e02`75aa4880 ffff8e02`75aa2560 00000000`00000000 : ffff978b`6d436653 ffff8e02`75aa4720 fffff80e`f6b9f660 00000000`00000000 : 0xffff8e02`75aa25c0
*** WARNING: Unable to verify timestamp for sbwfw.sys
*** ERROR: Module load completed but symbols could not be loaded for sbwfw.sys
See if you can update it.
There are also many, many references to a corrected hardware fault reported by the CPU but this is probably a separate issue.
Code:2018-03-29T16:47:56.082 A corrected hardware error has occurred.Reported by component: Processor CoreError Source: Corrected Machine CheckError Type: Internal parity errorProcessor APIC ID: 6The details view of this entry contains further information.