New
#11
1) For startup and recovery system failure:
a) un-check automatically restart
b) reboot > confirm the setting change
2) For Ccleaner un-check:
a) Memory Dumps
b) Windows Log Files
1) Open the BIOS and post images for
3.3, 5 and 12 voltage values
CPU voltage and frequency
2) Make a brand new restore point
3) Windows driver verifier is a tool which tests drivers. It will repetitively produce BSOD until all misbehaving drivers are fixed or until the tool is turned off.
a) Use the settings in this link for the customized test settings:
Driver Verifier-- tracking down a mis-behaving driver. - Microsoft Community
b) Use the information in this link to turn off Windows driver verifier after each BOSD:
Enable and Disable Driver Verifier in Windows 10 Windows 10 Tutorials
The computer may become sluggish or the boots may become slower when using Windows driver verifier.
The tool will be used for 48 hours and then an additional 36 hours after the last BSOD.
After each BSOD > use the Windows advanced troubleshooting menu to turn off the tool. Then return to the desktop and run the beta log collector > post a new zip into the thread
1) For Prime95 what were:
a) test duration
b) maximum temperature
c) was there any hangs/freezing?
2) For FurMark what were:
a) test duration
b) maximum temperature
c) was there any hangs/freezing or display artifacts?
3) Download and install the Intel Processor Diagnostic Tool
When the test completes please use the Microsoft snipping tool to post an image into the thread.
Download Intel® Processor Diagnostic Tool:
Download Intel® Processor Diagnostic Tool
The Intel® Processor Diagnostic Tool:
The Intel® Processor Diagnostic Tool
for prime 95
the test duration was 3 hours and 34 minutes...like the image i posted...it is written
the max temperature was 70 for core 4(0,1,2,3,4,5)
no freezing at all
average temps for all core was 65
for furmark i it is displayed with the images
test duration was 1 hour and 4 min
max temp was 82
no...no freezing or artifacts,,,hangs
what to do now
I got bsod because of the windows driver verifier
The stop code is: Driver_verifier detected violation
What failed: iocbios2.sys