Windows 10: BSOD shortly after startup of win10 Solved

Page 1 of 3 123 LastLast
  1.    18 Feb 2018 #1

    BSOD shortly after startup of win10


    When running normal mode my computer have run perfectly with the same system config for more then 1.5 years now. No HW has been changed.
    Lately I have started to get BSOD unexpected operation (win10 64bit).
    The problem does not occour when running safe mode with network function.
    I have updated all driver and firmware I could find. Especially motherboard (Z170-A), grahpics drivers (Nvidia GTX 1080) and even firmware for my system disk Samsung 950 PRO 512GB.
    But the problem remains.
    Attached are some logfiles...
    BSOD shortly after startup of win10 Attached Files
      My ComputerSystem Spec


  2. Posts : 13,312
    Windows 10 Pro
       18 Feb 2018 #2

    Please remove these programs before troubleshooting.

    Code:
    Start Menu\Programs\DriverToolkit	Public:Start Menu\Programs\DriverToolkit	Public
    If you installed any drivers with either of these programs, use a system restore point or system backup. If neither are available and you don't want to go for a clean install,
    - if you don't know what drivers were installed, check if these programs have logs of driver installations, if requested I can spit the logs for you to find out
    - if you do know, go into device manager and revert the drivers.
      My ComputersSystem Spec

  3.    18 Feb 2018 #3

    axe0 said: View Post
    Please remove these programs before troubleshooting.

    Code:
    Start Menu\Programs\DriverToolkit	Public:Start Menu\Programs\DriverToolkit	Public
    If you installed any drivers with either of these programs, use a system restore point or system backup. If neither are available and you don't want to go for a clean install,
    - if you don't know what drivers were installed, check if these programs have logs of driver installations, if requested I can spit the logs for you to find out
    - if you do know, go into device manager and revert the drivers.
    I installed the DriverToolKit my mistake after all the driver updates. I have not installed any drivers using it and now its removed.
      My ComputerSystem Spec


  4. Posts : 13,312
    Windows 10 Pro
       18 Feb 2018 #4

    This looks like a bad CPU, did you ever overclock anything?
      My ComputersSystem Spec

  5.    18 Feb 2018 #5

    No I have not overclocked anything. But I do use a special cooling Solution for the CPU with NoFan CR-95C.
      My ComputerSystem Spec

  6.    19 Feb 2018 #6

    Hi there,

    This is a summary of the most recent bsods analysis.

    Code:
    WHEA Summary: 
     
    GenuineIntel_PROCESSOR_MAE - Micro-Architectural Error - Internal timer (Proc 5 Bank 4) 
    GenuineIntel_PROCESSOR_MAE - Micro-Architectural Error - Internal timer (Proc 2 Bank 4) 
    GenuineIntel_PROCESSOR_MAE - Micro-Architectural Error - Internal timer (Proc 7 Bank 4) 
    GenuineIntel_PROCESSOR_MAE - Micro-Architectural Error - Internal timer (Proc 5 Bank 4) 
    GenuineIntel_PROCESSOR_MAE - Micro-Architectural Error - Internal timer (Proc 5 Bank 4)

    "Internal timer": Internal CPU timer fault. Hardware issue affecting CPUs timing mechanism.


    I recommend to set the BIOS to factory default settings and check/stresstest the CPU.





    BSOD shortly after startup of win10 Diagnostic Test BSOD shortly after startup of win10
     CPU TEST

    Run Prime95 to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums

    For Intel CPUs you can additionally use the Intel Processor Diagnostic Tool

    warning   Warning
    Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.

    Note   Note
    Monitor CPU temperatures with Speccy or HWiNFO64

    Speccy
    Speccy gives you detailed information on every piece of hardware in your computer.

    HWiNFO64
    Hardware Info (HWiNFO) is a powerful system information utility designed especially for detection of hardware.


    Take Screenshots of it and post it here.
      My ComputerSystem Spec


  7. Posts : 13,312
    Windows 10 Pro
       19 Feb 2018 #7

    I don't think a CPU stress test will help, more often than not it is only for temperatures which are usually fine.
      My ComputersSystem Spec

  •    19 Feb 2018 #8

    axe0 said: View Post
    I don't think a CPU stress test will help, more often than not it is only for temperatures which are usually fine.
    ok, and what do u think about the Intel Diag Tool? could it be more helpful?
      My ComputerSystem Spec


  • Posts : 13,312
    Windows 10 Pro
       19 Feb 2018 #9

    Pretty much the same, although both can catch hardware problems IME it's quite rare. If Prime95 doesn't catch any, Intel Diag could and likewise.
      My ComputersSystem Spec

  •    19 Feb 2018 #10

    Tested with Prime95 for 5 minutes only and had no errors.
    Moved on to Intel Diag Tool which gave me an error quite quickly. See attached txt file for the report.
    BSOD shortly after startup of win10 Attached Files
      My ComputerSystem Spec


  •  
    Page 1 of 3 123 LastLast

    Related Threads
    A while ago I had this BSOD and after some shot-in-the-dark attempts to fix it like reinstalling some drivers, chkdsk, and that sort of thing, it worked again and I thought it was over. Recently it has came back with a vengeance. This happened after...
    I have an Asus G73jh laptop. I upgraded from Win7 x64 to Win10 x64. Shortly after logging into Win 10, I frequently get a BSOD with "MACHINE_CHECK_EXCEPTION" or a hard freeze. It sometimes occurs right after I see my desktop background, and...
    I am getting a BSOD with 2 different errors (what it's shown me so far): "IRQL not less or equal to" and also "Driver_Irql not less or equal to". I am using Windows 10. My upgrade was about a month ago. I use this Alienware M17XR3 laptop to mostly...
    Hi, I have partially solved this issue and I am still working it. I get a BSOD PFN_List_Corrupt error about 3-5 minutes into working. I used MSConfig to go into safe mode and disabled all. No more BSOD. Off safe mode with normal startup and...
    I recently did an upgrade install from my Win7 desktop to Windows 10, and I've been having this issue since. Right near the end of when the computer is finished starting up (a couple minutes after the desktop appears) the desktop and taskbar turn to...
    Our Sites
    Site Links
    About Us
    Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

    Designer Media Ltd
    All times are GMT -5. The time now is 01:57.
    Find Us