Windows 10 blue screen.. srttrail

If you can execute these commands from Windows Installation DVD/USB, if you don't have one you can create one using Windows 10 Media Creation Tool. You will need another working Windows installed computer to create Windows Installation DVD/USB.

Also i need you to post screenshot of the commands outputs if you can.

Please use a camera or smart phone camera to take pictures and post images into the thread.
If there are any problems posting images please use one drive or drop box share links.

1) open the windows advanced troubleshooting menu
2) click on command prompt > Administrator: X:\Windows\system32\cmd.exe > X:\Sources:>
3) type: bcdedit /enum
4) type: bcdedit /enum | find "osdevice"
5) type: C:
6) type: dir
7) type: D:
8) type: dir
9) type: X:
10) type: diskpark
11) type: list disk
12) type: select disk 0
13) type: list volume
14) type: list partition
15) type: exit

16) type: bootrec /fixmbr
17) type: bootrec /fixboot
18) type: bootrec /scanos
19) type: bootrec /rebuildbcd
20) type: exit
21) reboot

The above results will be used for additional commands to fix the boot, operating system, registry, or file system.
Please use a camera or smart phone camera to take pictures and post images of each command and the results into the thread

https://photos.app.goo.gl/rbBJe7JOVXArG91y2

thanks again

1) Use a camera or smart phone camera to take pictures and post images into the thread for all command prompt commands and results.
2) Open command prompt > administrator: X:\windows\system32\cmd.exe > X:\sources:>
3) type: diskpart
4) type: list disk
5) type: select disk 0
6) type: list volume
7) type: list partition
8) exit
9) chkdsk /f D:
This could take some time to complete. Reboot after it completes.

Open command prompt > administrator: x:\windows\system32\cmd.exe > x:\sources:>
10) Type: bcdedit /export D:\BCD_Backup (press Enter)
11) Type: D: (press Enter)
12) Type: cd boot (press Enter)
13) Type: attrib bcd -s -h -r (press Enter)
14) Type: ren D:\boot\bcd bcd.old (press Enter)
15) Type: bootrec /RebuildBCD (press Enter)

It may display:
Scanning all disks for Windows installations.
Please wait, since this may take a while...
Successfully scanned Windows installations.
Total identified Windows installations: 1
[1] D:\Windows
Add installation to boot list? Yes(Y)/No(N)/ALL(A):
16) Type: Y
The operation completed successfully.
X:\Windows>
17) Type: exit
18) reboot

https://photos.app.goo.gl/rTWkmDlyUImzf5XA2 cannot find boot dir in D:

https://photos.app.goo.gl/szCvC1auF0K3sOzb2

Since the BCD store exists and lists a Windows installation, you'll first have to "remove" it manually and then try to rebuild it again.

At the Command Prompt, type below command as shown and then press Enter:

Code:

C:

At the Command Prompt, type below command as shown and then press Enter:

Code:

bcdedit /export C:\bcdbackup

The bcdedit command is used here to export the BCD store as a file: bcdbackup. There's no need to specify a file extension.

The command should return the following on screen:
The operation completed successfully.

Meaning the BCD export worked as expected.


At this point, you need to adjust several file attributes for the BCD store so you can manipulate it. At the prompt, execute the attrib command exactly like this:

Code:

attrib c:\boot\bcd -h -r -s

What you just did with the attrib command was remove the hidden, read-only, and system attributes from the file bcd. Those attributes restricted the actions you could take on the file. Now that they're gone, you can manipulate the file more freely - specifically, rename it.

To rename the BCD store, execute the ren command as shown:

Code:

ren C:\boot\bcd   bcd.old

Now that the BCD store is renamed, you should now be able to successfully rebuild it.

Try rebuilding the BCD again by executing the following, followed by Enter:

Code:

bootrec /rebuildbcd

Restart your computer after rebuilding the BCD store.

I tried but it didn't work. So I went ahead with 'reset my pc' with files backup and it worked. PC running fine so far. Thanks again for your help.

1) Please make a backup image using Macrium:

Macrium Software | Macrium Reflect Free

Backup and Restore with Macrium Reflect Windows 10 Tutorials

Use Macrium Reflect Rescue Media to Fix Windows Boot Issues Windows 10 Tutorials

Got the same problem since yesterday. Can't do the following as screenshots show. How do I do what I can't ?!

Dropbox - 20180303_125550.jpg

Dropbox - 20180303_125411.jpg