Windows 10: Windows 10 blue screen.. srttrail

Page 2 of 2 FirstFirst 12
  1.    1 Week Ago #11

    If you can execute these commands from Windows Installation DVD/USB, if you don't have one you can create one using Windows 10 Media Creation Tool. You will need another working Windows installed computer to create Windows Installation DVD/USB.

    Also i need you to post screenshot of the commands outputs if you can.
      My ComputerSystem Spec


  2. Posts : 14,296
    windows 10 professional version 1607 build 14393.969 64 bit
       1 Week Ago #12

    Please use a camera or smart phone camera to take pictures and post images into the thread.
    If there are any problems posting images please use one drive or drop box share links.

    1) open the windows advanced troubleshooting menu
    2) click on command prompt > Administrator: X:\Windows\system32\cmd.exe > X:\Sources:>
    3) type: bcdedit /enum
    4) type: bcdedit /enum | find "osdevice"
    5) type: C:
    6) type: dir
    7) type: D:
    8) type: dir
    9) type: X:
    10) type: diskpark
    11) type: list disk
    12) type: select disk 0
    13) type: list volume
    14) type: list partition
    15) type: exit

    16) type: bootrec /fixmbr
    17) type: bootrec /fixboot
    18) type: bootrec /scanos
    19) type: bootrec /rebuildbcd
    20) type: exit
    21) reboot

    The above results will be used for additional commands to fix the boot, operating system, registry, or file system.
    Please use a camera or smart phone camera to take pictures and post images of each command and the results into the thread
      My ComputerSystem Spec

  3.    1 Week Ago #13

    hi please find screenshots in the link

      My ComputerSystem Spec


  4. Posts : 14,296
    windows 10 professional version 1607 build 14393.969 64 bit
       1 Week Ago #14

    1) Use a camera or smart phone camera to take pictures and post images into the thread for all command prompt commands and results.
    2) Open command prompt > administrator: X:\windows\system32\cmd.exe > X:\sources:>
    3) type: diskpart
    4) type: list disk
    5) type: select disk 0
    6) type: list volume
    7) type: list partition
    8) exit
    9) chkdsk /f D:
    This could take some time to complete. Reboot after it completes.

    Open command prompt > administrator: x:\windows\system32\cmd.exe > x:\sources:>
    10) Type: bcdedit /export D:\BCD_Backup (press Enter)
    11) Type: D: (press Enter)
    12) Type: cd boot (press Enter)
    13) Type: attrib bcd -s -h -r (press Enter)
    14) Type: ren D:\boot\bcd bcd.old (press Enter)
    15) Type: bootrec /RebuildBCD (press Enter)

    It may display:
    Scanning all disks for Windows installations.
    Please wait, since this may take a while...
    Successfully scanned Windows installations.
    Total identified Windows installations: 1
    [1] D:\Windows
    Add installation to boot list? Yes(Y)/No(N)/ALL(A):
    16) Type: Y
    The operation completed successfully.
    X:\Windows>
    17) Type: exit
    18) reboot
      My ComputerSystem Spec

  5.    6 Days Ago #15

    https://photos.app.goo.gl/rTWkmDlyUImzf5XA2 cannot find boot dir in D:
      My ComputerSystem Spec

  6.   My ComputerSystem Spec

  7.    6 Days Ago #17

    Since the BCD store exists and lists a Windows installation, you'll first have to "remove" it manually and then try to rebuild it again.

    At the Command Prompt, type below command as shown and then press Enter:

    Code:
    C:
    At the Command Prompt, type below command as shown and then press Enter:

    Code:
    bcdedit /export C:\bcdbackup
    The bcdedit command is used here to export the BCD store as a file: bcdbackup. There's no need to specify a file extension.

    The command should return the following on screen:
    The operation completed successfully.

    Meaning the BCD export worked as expected.


    At this point, you need to adjust several file attributes for the BCD store so you can manipulate it. At the prompt, execute the attrib command exactly like this:

    Code:
    attrib c:\boot\bcd -h -r -s
    What you just did with the attrib command was remove the hidden, read-only, and system attributes from the file bcd. Those attributes restricted the actions you could take on the file. Now that they're gone, you can manipulate the file more freely - specifically, rename it.

    To rename the BCD store, execute the ren command as shown:

    Code:
    ren C:\boot\bcd   bcd.old
    Now that the BCD store is renamed, you should now be able to successfully rebuild it.

    Try rebuilding the BCD again by executing the following, followed by Enter:

    Code:
    bootrec /rebuildbcd
    Restart your computer after rebuilding the BCD store.
      My ComputerSystem Spec

  8.    4 Days Ago #18

    I tried but it didn't work. So I went ahead with 'reset my pc' with files backup and it worked. PC running fine so far. Thanks again for your help.
      My ComputerSystem Spec

  9.   My ComputerSystem Spec


 
Page 2 of 2 FirstFirst 12

Related Threads
After Win10 was updated automatically at shutdown, it cannot start back, the Windows logo gets stuck at screen without spinning dots, there is no HDD activity for half an hour. After computer is turned off forcibly sometimes and turned on again, the...
Blue Screen on windows 10 in BSOD Crashes and Debugging
Hi all. i always encounter a blue screen in my desktop when i'm using a adobe premiere and after effects. i have a good specs of parts Core i7 processor, 64gb memory and GTX1080 video card.. anybody here know how can i fix this problem ??...
Windows 10 blue screen BAD_SYSTEM_CONFIG_INFO in BSOD Crashes and Debugging
26852 Upgraded to Windows 10, getting blue screen error: BAD_SYSTEM_CONFIG_INFO Decided to upgrade my Dell laptop to Windows 10, was running 7 on it. The install process seemed to go smoothly up until I had to login for the first time. PC...
blue screen of death windows 10 in BSOD Crashes and Debugging
after running perfectly the previous night. i turned my computer on in the morning, and got the message - your computer has run into a problem and needs to restart. we're just collecting some error info and then we'll restart. it then got stuck in a...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 05:20.
Find Us