Unexpected BSOD - Clean Install of W10 - BSOD's still Reoccurring.

Page 1 of 2 12 LastLast

  1. Posts : 5
    Windows 10 64bit
       27 Jan 2018 #1

    Unexpected BSOD - Clean Install of W10 - BSOD's still Reoccurring.


    Heya, I've been experiencing BSOD's for the better part of 7-9 months.
    I've tried to combat these doing Driver Updates, etc.. And I've come as far as last week, completely reinstalling Windows10 from scratch several times (with BSOD's happening within several hours of a clean install, while installing drivers, etc...) - I've also did a BIOS update on my system from "https://www.gigabyte.com/Support/Motherboard"
    Things that I'm doing when it happens is.
    • Watching a movie or
    • Playing a game (Final Fantasy 14)
    • Streaming or
    • System is Idling


    BSOD's are mainly caused by ntoskrnl.exe (BlueScreenView)

    Common BSOD's
    1. MEMORY_MANAGEMENT
    2. KERNEL_SECURITY_CHECK_FAILURE
    3. PAGE_FAULT_IN_NONPAGED_AREA (Most recently/first time I've seen this)
    Unexpected BSOD - Clean Install of W10 - BSOD's still Reoccurring. Attached Files
      My ComputerSystem Spec

  2.    28 Jan 2018 #2

    Hi, i'm not an expert (long time lurker) but since you haven't had any help yet, I took a look at your dumps. I'm still learning so if I have anything wrong then please let me know :)

    There were two .dmp files, both blame a memory issue. Have you tested your ram? If not, you may want to follow this tutorial: MemTest86+ - Test RAM BSOD Tutorials

    I also see that some driver updates have failed, however I'm not sure if they have been completed successfully since. Please could you check that your drivers are up to date?
      My ComputerSystem Spec

  3.    28 Jan 2018 #3

    What brand/make/model/wattage PSU are you using? What PCIe slot is your GPU installed on? What are your RAM settings at?
      My ComputerSystem Spec


  4. Posts : 5
    Windows 10 64bit
    Thread Starter
       29 Jan 2018 #4

    catvomit said: View Post
    Hi, i'm not an expert (long time lurker) but since you haven't had any help yet, I took a look at your dumps. I'm still learning so if I have anything wrong then please let me know :)

    There were two .dmp files, both blame a memory issue. Have you tested your ram? If not, you may want to follow this tutorial: MemTest86+ - Test RAM BSOD Tutorials

    I also see that some driver updates have failed, however I'm not sure if they have been completed successfully since. Please could you check that your drivers are up to date?
    Tested all 4 together, within a few seconds I was bombarded with errors. Removed all modules, and tested 1 at a time. Modules I labelled 1-2-3-4, modules 2-4 had errors so I pulled them out completely. (running 16 GB now instead of 32 GB). The 2 8GB sticks did 8 passes, perfectly. Module 2, and Module 4 threw up errors almost instantly, with Module 2 showing the worst, like 50+ errors barely a few seconds in, where Module 4 showed 1, but I still pulled it after 30seconds.
    Plankton said: View Post
    What brand/make/model/wattage PSU are you using? What PCIe slot is your GPU installed on? What are your RAM settings at?
    Xigmatek 600W PSU
    Its the one closest the CPU
    Where/how do I find my RAM settings?
      My ComputerSystem Spec


  5. Posts : 21,442
    windows 10 professional version 1607 build 14393.969 64 bit
       29 Jan 2018 #5

    The website has strict rules on piracy:
    Forum Rules - Windows 10 Forums
    See rule #4
    The files displayed piracy of Adobe software.
      My ComputerSystem Spec


  6. Posts : 5
    Windows 10 64bit
    Thread Starter
       29 Jan 2018 #6

    zbook said: View Post
    The website has strict rules on piracy:
    Forum Rules - Windows 10 Forums
    See rule #4
    The files displayed piracy of Adobe software.
    My apologies, it was used for educational purposes, which I understand is strictly not acceptable (but as you know the price of software for students is high/hard to afford, unless you get a discount, which somewhat helps). I've completely removed it from my system/uninstalled and restored the system back. I'm really sorry.
    Unexpected BSOD - Clean Install of W10 - BSOD's still Reoccurring. Attached Files
      My ComputerSystem Spec


  7. Posts : 21,442
    windows 10 professional version 1607 build 14393.969 64 bit
       29 Jan 2018 #7

    Please run the beta log collector and post a zip into the thread for troubleshooting.
    log collector v2-beta08.zip

    Please update the system specs in the "My Computer" section:

    System Specs - Fill in at Ten Forums:
    System Specs - Fill in at Ten Forums Site Use Tutorials
    In the left corner below in your post you find 'My System Specs'.
    After clicking it you can find a link a little below that says 'Update your System Spec', click on this link to get to the page where you can fill in your system specs.
    System Info - See Your System Specs - Windows 7 Help Forums


    Include PSU. cooler, case, peripherals and anything attached to the computer by wired or wireless (mouse, keyboard, headset, printer, xbox, etc.)
      My ComputerSystem Spec


  8. Posts : 5
    Windows 10 64bit
    Thread Starter
       29 Jan 2018 #8

    I think I've did everything right
    Unexpected BSOD - Clean Install of W10 - BSOD's still Reoccurring. Attached Files
      My ComputerSystem Spec


  9. Posts : 21,442
    windows 10 professional version 1607 build 14393.969 64 bit
       29 Jan 2018 #9

    The latest log collectors did not collect any mini dumps.
    1) There is no Ccleaner installed. Is there any other software that cleans files?
    2) In the left lower corner type: clean > open disk cleanup > scroll up and down > post images into the thread
    3) In the left lower corner type: system > open system control panel > on the left pane click advanced system settings >
    3a) under performance click on settings > on performance options click on the advanced tab > under virtual memory click on change > post into the thread an image of the virtual memory window
    3b) under startup and recovery click settings > post an image of the startup and recovery window into the thread

    For all tests/steps please post images into the thread.
    Take Screenshot in Windows 10 General Tips Tutorials
    If there are any problems posting images please use one drive or drop box share links.
      My ComputerSystem Spec


  10. Posts : 5
    Windows 10 64bit
    Thread Starter
       29 Jan 2018 #10

    zbook said: View Post
    The latest log collectors did not collect any mini dumps.
    1) There is no Ccleaner installed. Is there any other software that cleans files?
    2) In the left lower corner type: clean > open disk cleanup > scroll up and down > post images into the thread
    3) In the left lower corner type: system > open system control panel > on the left pane click advanced system settings >
    3a) under performance click on settings > on performance options click on the advanced tab > under virtual memory click on change > post into the thread an image of the virtual memory window
    3b) under startup and recovery click settings > post an image of the startup and recovery window into the thread

    For all tests/steps please post images into the thread.
    Take Screenshot in Windows 10 General Tips Tutorials
    If there are any problems posting images please use one drive or drop box share links.
    1) There is no Ccleaner installed. Is there any other software that cleans files?

    • Nope, nothing.

    2) In the left lower corner type: clean > open disk cleanup > scroll up and down > post images into the thread

    • Done

    3) In the left lower corner type: system > open system control panel > on the left pane click advanced system settings >
    3a) under performance click on settings > on performance options click on the advanced tab > under virtual memory click on change > post into the thread an image of the virtual memory window

    • Done

    3b) under startup and recovery click settings > post an image of the startup and recovery window into the thread

    • Done
    Unexpected BSOD - Clean Install of W10 - BSOD's still Reoccurring. Attached Files
      My ComputerSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
can't boot windows after reoccurring bsod's in BSOD Crashes and Debugging
So I have a laptop (windows 10) and it was having performance problems, specifically 100% disk usage all the time. I tried everything to fix it but nothing worked. I then later started to get bsod all the time which I assume is related. About a week...
BSOD during clean install in BSOD Crashes and Debugging
Quick backstory: Had Windows 10 Pro running since it came out with relatively few problems. I decided it was time for a graphics upgrade so I threw in an EVGA GeForce 1060. Nvidia decided I needed new drivers and it has been all downhill since...
hey! i got a Lenovo yoga 3 pro 1370 with core -m CPU, Liteon L8H-256v2g SSD after a clean windows 10 -genuine installation, UEFI. i installed it cause there where BSODs before and though it may be because of corrupted file system. now i think its...
Multiple BSOD after clean install in BSOD Crashes and Debugging
Good afternoon, I started having a few BSOD crashes last month and after exhaustive attempts to solve this issue myself with no progress I did a clean install of windows 10. The issue remains, however, it is less frequent now. 86921
bsod win 10 clean install , old dell in BSOD Crashes and Debugging
hello, hope someone can help. upgraded a vista machine to win7, then updated to win10, then clean installed win 10. worked ok for a few days but now bsod every 20 minutes or so. I get watchdog violation. have updated bios and NVidia drivers plus...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 02:16.
Find Us