BSOD Only when playing Siege. NtosKRNL.exe

  1. Posts : 3
    Win 10

    BSOD Only when playing Siege. NtosKRNL.exe


    When I play other games rather than Siege I don't get a BSOD. I tried updating all my drivers and also updated my BIOS.
    To no avail it didn't get fixed.

    Here are my specs:

    CPU: Intel Core i7-4770k
    PSU: Corsair RM850
    RAM: Corsair vengeance DDR3-1866mhz
    Storage: Seagate 1TB
    SSD1(OS) ADATA 120GB
    SSD2 Samsung EVO 250gb
    GPU: ASUS Geforce GTX 1060 6GB

    Here are the logs:
      My Computer

  2. Posts : 5,184
    64bit Win 10 Pro ver 21H2

    Hello FraikzZ,

    Welcome to TenForums :)

    Three of the six crash dumps that are recorded in the logs show 0x124 hardware errors. Please run through the following tests and report back on the results. One of the dumps indicated a Malwarebytes driver might be a cause. You should uninstall Malwarebytes while you are troubleshooting. If you used a driver update program I have to warn you that these are not recommended by the analysts here since they so often introduce more problems than they are worth. Only update drivers from the manufacturers website or via Windows update. To be sure you have not harmed your system I would roll back any drivers you updated via a non-standard process.

    STOP 0x124 Troubleshooting

    Read carefully before proceeding.

    warning   Warning
    If you're overclocking your system, revert back to stock clocks now.

    Note   Note
    Test the system once the overclock is removed before continuing with the steps outlined below.

    Part One: CPU Stress Test
    Part Two: MemTest86+ RAM Diagnostic
    Part Three: Hard Drive Diagnostics
    Part Four: GPU Stress Test



    Run Prime95 to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums

    warning   Warning
    Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.



    Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums

    Note   Note

    MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.



    Run HDTune to
    • check the health,
    • scan for errors, no quick scan but full scan
    • run a benchmark.

    It may take some time, but please take the time you need to perform it properly.
    When above is done please make screenshots of the following
    • the health,
    • the error scan,
    • the benchmark incl. following
      • transfer rate,
      • access time,
      • burst rate,
      • cpu usage.



    Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 Forums

    Note   Note
    Run Furmark for around 30 minutes.
    warning   Warning
    Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.
      My Computers

  3. Posts : 3
    Win 10
    Thread Starter


    Thanks for the reply.
    I did the things you've mentioned and ran Prime95 for 5 hours straight and also did the Furmark test with no BSOD of both.

    I uploaded the HDTune tests as a attachment.

    EDIT: I've tried to run a couple of games simultaneously to get the RAM usage up and it BSOD instantly. Will test with memtest86+ later.


    Last edited by FraikzZ; 11 Jan 2018 at 14:30.
      My Computer

  4. Posts : 3
    Win 10
    Thread Starter

    Update: I brought the RAM to the retailer and they said it was faulty. I'll be getting new RAM soon from them.

    Thanks for the help!
      My Computer


  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 12:17.
Find Us

Windows 10 Forums