Passmark Performance Test Benchmark


  1. Posts : 26,344
    Win11 Pro, Win10 Pro N, Win10 Home, Windows 8.1 Pro, Ubuntu
       #841

    OldMike65 said:
    Ok, but I can't figure out HOW ...lol, already tried once, and took me 3 reboots just to get back into my bios, to put it back to defaults.
    Does your board have the Safe Boot button?

    Passmark Performance Test Benchmark-image.png
      My Computers


  2. Posts : 123,437
    Windows 11 Pro (x64) 21H2 Build 22000.675
       #842

    Cliff S said:
    Does your board have the Safe Boot button?

    Passmark Performance Test Benchmark-image.png
    Yes it does Cliff, just didn't want to move computer, to take side cover off....:)
    My case weighs over 45lbs ....
      My Computers


  3. Posts : 2,445
    Windows 10 Pro 64-Bit (1809)
       #843

    OldMike65 said:
    Ok, but I can't figure out HOW ...lol, already tried once, and took me 3 reboots just to get back into my bios, to put it back to defaults.
    I have had that problem before. You will have to feed your RAM about 1.5v (still safe) and up your VCCIO and VCCSA a tad but still safe.
      My Computers


  4. Posts : 12,726
    Windows 11 Pro
       #844

    Mike, maybe some of the recent updates have affected it, but I had the same problem when I tried it yesterday. Earlier I had it overclocked real well. I have the same ram as you, 3200C14.

    This was stable at one point. I just haven't played with it since.

    Passmark Performance Test Benchmark-ram-4000.png
      My Computer


  5. Posts : 26,344
    Win11 Pro, Win10 Pro N, Win10 Home, Windows 8.1 Pro, Ubuntu
       #845

    OldMike65 said:
    Yes it does Cliff, just didn't want to move computer, to take side cover off....:)
    My case weighs over 45lbs ....
    The back problems I have this week, I can understand

    I can't get to mine, as my air intake is on the bottom of the case, and three fans block all those buttons and switches
      My Computers


  6. Posts : 123,437
    Windows 11 Pro (x64) 21H2 Build 22000.675
       #846

    worf105 said:
    I have had that problem before. You will have to feed your RAM about 1.5v (still safe) and up your VCCIO and VCCSA a tad but still safe.
    what about the the XMP setting when oc'n ....on or off....like I said, I am not very good at overclocking my memory at all. My CPU blows aways just about everybody.....even your rig......but oc'n my memory, I am VERY bad at.
      My Computers


  7. Posts : 12,726
    Windows 11 Pro
       #847

    Mike, you have some presets in your Dram config. Play with those a little.
      My Computer


  8. Posts : 123,437
    Windows 11 Pro (x64) 21H2 Build 22000.675
       #848

    Cliff S said:
    The back problems I have this week, I can understand

    I can't get to mine, as my air intake is on the bottom of the case, and three fans block all those buttons and switches
    I can move it Cliff, but it is always my last choice. :)
    Got all kinds of room inside case thou.....its Huge...
      My Computers


  9. Posts : 2,445
    Windows 10 Pro 64-Bit (1809)
       #849

    OldMike65 said:
    what about the the XMP setting when oc'n ....on or off....like I said, I am not very good at overclocking my memory at all. My CPU blows aways just about everybody.....even your rig......but oc'n my memory, I am VERY bad at.
    I just kept the XMP profile as is and upped the speed too 3400 and upped the voltage to 1.5 volts. booted ok. If you have trouble booting then loosing the timings a little and retry and disable the fast boot option in the UEFI also.
      My Computers


  10. Posts : 123,437
    Windows 11 Pro (x64) 21H2 Build 22000.675
       #850

    essenbe said:
    Mike, you have some presets in your Dram config. Play with those a little.
    Well I did see a choice of using "mode1 or mode2" tried that, didn't do nut'n ....
      My Computers


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 10:11.
Find Us




Windows 10 Forums