1.    01 Aug 2017 #1
    Join Date : Jul 2017
    Posts : 2

    Win 10 error code different ones....


    I purchased an acer aspire one from Pawn shop they attempted a factory reset and it it's stuck on bsod
    All the trouble shooting options are circling into a conundrum . The ones that will completely run fail with error code 0cx0000225 stating that there are files missing or corrupt
    Or error code 0xc000000f
    After a failed full reset the bsod comes up expressing the fail and as bottom of screen gives 3 options
    Esc to advanced trouble shoot
    Enter to try again
    F8 for start up settings

    Esc outs the only option that is successful in actually doing the task it says it would do .

    I've tried a couple sfc scannow commands along with diskpart and what Its said is there is a problem on the upper case file...
      My ComputerSystem Spec
  2.    01 Aug 2017 #2
    Join Date : Oct 2016
    Caledon, Ontario, Canada
    Posts : 3,962
    Windows 10 Pro Build 1703

    Hi Deetized. Welcome to the TenForums @Deetized

    I would abandon any additional attempts to "Fix" and even if you do get it fixed its history is questionable. Not a good way to start out. Hopefully you have access to another computer. Please follow this tutorial on a clean install. Assuming your device was on Win 10 with proper licensing it will re-activate when you re-install. Skip over the entering of the key when asked.

    Clean Install Windows 10

    When doing the clean install I recommend deleting all the partitions on the disk before the actual installation. Windows will then create what it needs.

    I mention licensing just so you are aware. If the licensing wasn't proper then it won't be re-activated, worth considering.


    Ken
      My ComputerSystem Spec
  3.    01 Aug 2017 #3
    Join Date : Jul 2017
    Posts : 2
    Thread Starter

    Quote Originally Posted by Caledon Ken View Post
    Hi Deetized. Welcome to the TenForums @Deetized

    I would abandon any additional attempts to "Fix" and even if you do get it fixed its history is questionable. Not a good way to start out. Hopefully you have access to another computer. Please follow this tutorial on a clean install. Assuming your device was on Win 10 with proper licensing it will re-activate when you re-install. Skip over the entering of the key when asked.

    Clean Install Windows 10

    When doing the clean install I recommend deleting all the partitions on the disk before the actual installation. Windows will then create what it needs.

    I mention licensing just so you are aware. If the licensing wasn't proper then it won't be re-activated, worth considering.


    Ken
    Ty honny I appreciate your adviceWin 10 error code different ones....
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
Bad image error while trying to install directx error code: 0xc000012f
Hello. I just freshly installed Windows 10 and I'm having this error while trying to install directx through Steam or independently. 135711 Tried following things; - Updating almost everything on computer. - Clean boot. - Safe mode. -...
General Support
Registry Error - Windows Update - Error Code 0x80040154
Hello all, I have an issue with my WIndows Updates, I am getting error code 0x80040154 and all the sites I checked did not help. Here is my Windows Update log: Got 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL:...
Windows Updates and Activation
How resolve error 16393, BITS Error code: 0x80004005 I'net Gateway?
anyone run this one before? I am not currently using a WIFI device. Error 16393 Log Name: System Source: Microsoft-Windows-Bits-Client Date: 12/8/2015 3:05:05 PM Event ID: 16393 Task Category: None Level: ...
Network and Sharing
Backup fails with a 'device error' code 0x8078012D/disk read error
During Windows backup, which wants to backup the 'C' drive and my games drive 'E' (for some reason), I get the following error message after the 'C' backup has completed but not the 'E': 'The backup operation that started at...
Backup and Restore
Persistent SMART error on cloned drives (Error code: 2000-0151)
I am on my 4th SSD in my Windows 10 laptop that has been getting SMART error 2000-0151. We have replaced the motherboard, the SSD, and the connector cable between the SSD and motherboard. One thing is that I've been using Macrium Reflect to clone...
Drivers and Hardware
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 11:05.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums