Windows 10: Restore Point won't work on 16226 Solved

Page 1 of 2 12 LastLast

  1. Posts : 88
    Always the latest Insider build.
       23 Jun 2017 #1

    Restore Point won't work on 16226


    Installed 16226 the other day, the OS seems to work ok..mouse acts weird sometimes. My main problem I can not create a restore point. I went into gpedit.msc and make sure that the restore point was configured as "Not Configured".
    Error code 0x81000203 is displayed. Googled but not of the suggestions ar able to fix the problem.
      My ComputerSystem Spec


  2. Posts : 8,728
    windows 10 professional version 1607 build 14393.969 64 bit
       23 Jun 2017 #2

    Hi jm44jg39,

    Open administrative command prompt and type or copy and paste:


    1) winver (in the pop up about windows > view your windows version and build > type this information into the thread)


    2) sfc /scannow


    3) dism /online /cleanup-image /restorehealth


    4) chkdsk /scan


    When these have completed > right click on the top bar or title bar of the administrative command prompt box > left click on edit then select all > right click on the top bar again > left click on copy > paste into the thread



    Run windows updates and post any failed update KB# with error code.
      My ComputerSystem Spec


  3. Posts : 88
    Always the latest Insider build.
    Thread Starter
       23 Jun 2017 #3

    zbook:

    Winver is: 1703 (OS Build 16226.1000) All updates ate current. By the way the same problem on my laptop with same ver # and build.

    Microsoft Windows [Version 10.0.16226.1000](c) 2017 Microsoft Corporation. All rights reserved.C:\WINDOWS\system32>sfc /scannowBeginning system scan. This process will take some time.Beginning verification phase of system scan.Verification 100% complete.Windows Resource Protection did not find any integrity violations.C:\WINDOWS\system32>dism /online /cleanup-image /restorehealthDeployment Image Servicing and Management toolVersion: 10.0.16226.1000Image Version: 10.0.16226.1000[===========================87.9%================== ]Error: 0x80240022DISM failed. No operation was performed.For more information, review the log file.The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.logC:\WINDOWS\system32>chkdsk /scanThe type of the file system is NTFS.The shadow copy provider had an unexpected error while trying to process the specified operation.A snapshot error occured while scanning this drive. You can try again, but if this problem persists, run an offline scan and fix.
      My ComputerSystem Spec


  4. Posts : 8,728
    windows 10 professional version 1607 build 14393.969 64 bit
       23 Jun 2017 #4

    Please perform windows updates and post any failed update KB# with error code.


    1) Click win + R keys (simultaneously)
    2) type or copy and paste: services.msc
    3) search on the list for each:
    a) volume shadow copy
    b) microsoft software shadow copy provider

    For each right click and change:
    status > automatic
    services > started

    reboot


    click win + r (simultaneously)
    type or copy and paste: gpedit.msc
    navigate: computer configuration > administrative template > system > system restore
    On the right pane right click on turn off system restore > edit > change it to not configured

    reboot

    report results in creating a restore point
      My ComputerSystem Spec


  5. Posts : 88
    Always the latest Insider build.
    Thread Starter
       23 Jun 2017 #5

    Error code when performing Restore Point


    Click image for larger version. 

Name:	image.png 
Views:	19 
Size:	18.8 KB 
ID:	140867

    zbook, performed all tasks as you requested and ran Create a Restore Point from Cortana search.

    Thanks for you help.
      My ComputerSystem Spec


  6. Posts : 8,728
    windows 10 professional version 1607 build 14393.969 64 bit
       23 Jun 2017 #6

    So far:
    System restore error: 0x81000203
    There was an unexpected error in the property page
    There was an unexpected error for chkdsk /scan
    DISM restorehealth error: 0x80240022
    Windows 1703 (OS Build 16226.1000)
    Sfc /scannow no integrity violations




    Which antivirus and firewall software are you using?
    If using anything else but windows defender please temporarily turn off any non- Microsoft malware programs and turn on Windows defender.

    5) msconfig (in the pop up system configuration > move the dot from normal startup to selective startup > uncheck load startup items > click service tab > in left lower corner check hide all Microsoft services > in the lower right side click disable all > click apply or ok > do not reboot)


    6) taskmgr (in the pop up task manager > click on the start up tab > click on status so that the column sorts with enable rising to the top > right click on each row with enable and change to disable)


    7) shutdown /r (you will reboot the computer so that it is in clean boot)



    Open administrative command prompt and type or copy and paste this command:
    chkdsk /scan
    If that command fails again please run chkdsk /x /f /r
    It may take many hours to run so plan to run overnight.



    Please use a share link (onedrive) to post your DISM and CBS logs:
    C:\WINDOWS\Logs\DISM\dism.log
    C:\WINDOWS\Logs\CBS\cbs.log
      My ComputerSystem Spec


  7. Posts : 88
    Always the latest Insider build.
    Thread Starter
       23 Jun 2017 #7

    zbook:

    Restore is working now!

    This is what I did:
    1. I restored a Macrium Reflect Image of build 16199
    2. I then let build 16199 update to 16226
    3.I disabled Malware Bytes
    4. I disabled all Nvidia video card drivers in Services (there had been a recent update)
    5. I made sure Vol Shadow copy and windows backup were set to Auto in Services
    6. Rebooted & tried "create a Restore Point" and was successful.

    zbook,
    I want to thank you greatly for your suggestions, time and wisdom. This forum has been a wonderful resource for hooking up with experienced and knowledgeable folks. Thanks again!
    John C.
    Georgetown, Texas
      My ComputerSystem Spec


  8. Posts : 8,728
    windows 10 professional version 1607 build 14393.969 64 bit
       23 Jun 2017 #8

    Great. Nice work.
      My ComputerSystem Spec


  9. Posts : 124
    Windows 10.0.15063 (Version 1703) Pro 64-bit
       24 Jun 2017 #9

    jm44jg39 said: View Post
    zbook:

    Restore is working now!

    This is what I did:
    1. I restored a Macrium Reflect Image of build 16199
    2. I then let build 16199 update to 16226
    3.I disabled Malware Bytes
    4. I disabled all Nvidia video card drivers in Services (there had been a recent update)
    5. I made sure Vol Shadow copy and windows backup were set to Auto in Services
    6. Rebooted & tried "create a Restore Point" and was successful.

    zbook,
    I want to thank you greatly for your suggestions, time and wisdom. This forum has been a wonderful resource for hooking up with experienced and knowledgeable folks. Thanks again!
    John C.
    Georgetown, Texas
    I'd like to make a comment if you do not mind. I believe that the issue was most likely MalwareBytes interference in the restore process. I too have also experienced this, and once MalwareBytes was removed/inactive/exited, the restore process worked instantly.

    Probably just needed to shut off your anti-malware shield or anti-virus real time protection shield in case other people from Google find this post.

    Error 0x81000203
      My ComputerSystem Spec


  10. Posts : 88
    Always the latest Insider build.
    Thread Starter
       24 Jun 2017 #10

    Response to Hydrate


    Hydrate, thanks for your input. When the problem surfaced I did disable Malware Bytes but that did not solve the problem. I'm not sure what the glitch was. However, I suspect the Nvidia drivers because there was a recent driver update. This is just my guess. Also making sure the Volume Shadow Copy and Windows Backup were set to "automatic " in the Services may have helped correct the problem. I did strongly suspect that Insider build 16226 was the culprit but when I rolled back to a previous via Macrium Reflect and then let Windows Update download and reinstall 16226 the problem was corrected. Thus, I concluded that 16226 may not have been the culprit.
      My ComputerSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
Windows 10 automatics updates did not end up looping until 17 January 2017 and system restore point were made regularly also taking backup from those parts of system Windows10 does not save to restore points because they are not MS products but...
restore point in Backup and Restore
I can not get a game to load. need to set system restore point to earlier date.. when I do that it automatically shows present date?
I followed the instruction to manually create a Manual Restore Point and that works fine. Then I decided to set up the task in the Task Scheduler to automatically create a restore point once daily. For some reason the task is started as it should...
Solved Restore Point in Backup and Restore
Question; My computer had to be reformatted because of a lock out by a hacker, can I use a restore point that I made before the hack, to restore my files? The restore points and system image are on my back up drive , I restored a couple of files...
So why did Microsoft change this? If I remember correctly all previous versions would create a system restore point before doing Microsoft updates. Since 10 installed all updates that come in for me are downloaded and installed without a restore...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 21:04.
Find Us