1.    23 Jun 2017 #1
    Join Date : Jun 2017
    Posts : 3
    Windows 10 Home

    Is this normal behavior using the Macrium Reflect free boot media?


    I am running Windows 10 home.
    Recently installed macrium free latest V6 version. Previously used Acronis.
    I created the rescue media on cd.
    Booting from a cold boot with the cd, I can see the read/write light on the cd and hard drive activity on my tower, but all i am getting is a blinking cursor on the screen.
    I read it may take a while to load, but is this normal and how long should i wait to see if it loads.
    I am concerned by all the disk activity and nothing happening so I have turned off the computer and reboot normally. I would like to test the restore cd out to make sure it works.
    I don't want the Recovery Boot Menu Option because I think it writes to the MBR. I had a nightmare with Acronis which by default writes to the MBR.
    Acronis would load its restore media in about a minute, as will Aomei Backupper and Ashampoo backup as well as the windows 10 backup cd I burned.
    So what is a normal wait time for the cd to load and is the blinking cursor normal?
    Thanks.
      My ComputerSystem Spec
  2.    23 Jun 2017 #2
    Join Date : May 2016
    Massachusetts
    Posts : 238
    Windows 10 Pro 32-bit

    Is it possible you need to press any key in order to boot from CD?
    --- It's definitely a good idea to test your restore CD.
    --- I don't know if it makes a difference but I use a DVD-RW.

    In case you are interested I have auto verify turned on
    Click image for larger version. 

Name:	Auto Verify Image.PNG 
Views:	42 
Size:	66.2 KB 
ID:	140806

    I also have Verify Image turned on
    Click image for larger version. 

Name:	Verify Image.PNG 
Views:	42 
Size:	38.5 KB 
ID:	140807

    I've had to use MRF only once to restore a system image backup and it performed excellently.
      My ComputerSystem Spec
  3.    23 Jun 2017 #3
    Join Date : Jun 2017
    Posts : 3
    Windows 10 Home
    Thread Starter

    Thanks for the response. On cold boot I have chosen to boot from the CD. To date I have burned 3 discs. I have verified images on creation but I do not believe there is an option to verify the "create restore cd". It just burns the disc. I am using good Verbatim CD's and the restore cd fits on them with no problem.

    I just don't know if Macrium takes an inordinate amount of time to boot from the cd. As noted, I only see a blinking cursor on-screen and activities lights both from the hard drive and cd burner. I've waited 3 or 4 minutes and then just turn off the computer and reboot with the disc inserted.

    I was hoping someone who has previously used the restore cd can remark as to whether it may take 5 or more minutes before the macrium program loads. Maybe I am impatient, but it just seems to be doing nothing for a long time.
      My ComputerSystem Spec
  4.    23 Jun 2017 #4
    Join Date : Jan 2015
    UK, Midlands
    Posts : 10,962
    Win 10 Pro (1703)

    On mine, about 50s to idler (dots) then first display, a further 10s to be ready for action from pressing a key to initiate booting from CD.

    Typically a black screen with blinking cursor top left means a PC isn't seeing a boot device.
      My ComputerSystem Spec
  5.    23 Jun 2017 #5
    Join Date : Jun 2017
    Posts : 3
    Windows 10 Home
    Thread Starter

    Turned out that my cd/dvd burner does not like the verbatim discs I used. Switched to a different brand and it's all good. BTW, it did take about 3-5 minutes of a blinking cursor on a black screen before the Macrium menu appeared. Seems strange that Macrium does not have progress messages. Thanks for the replies and help.
      My ComputerSystem Spec
  6.    23 Jun 2017 #6
    Join Date : Jan 2015
    UK, Midlands
    Posts : 10,962
    Win 10 Pro (1703)

    Good- long time since I've heard of that sort of problem...
      My ComputerSystem Spec
  7.    23 Jun 2017 #7
    Join Date : May 2016
    Massachusetts
    Posts : 238
    Windows 10 Pro 32-bit

    Thanks for letting us know your solution. I just tested my MRF rescue disc. From a cold boot, a message appears to press any key to boot from the disc. Total time to boot and idler dots was about 50 seconds and it was ready to do its job.
    Edit: what cd/dvd burner do you use?
      My ComputerSystem Spec
  8.    24 Jun 2017 #8
    Join Date : Dec 2015
    Posts : 5,878
    Windows10

    Why don't you use a usb flash drive - far quicker and more reliable than a dvd?
      My ComputerSystem Spec
  9.    24 Jun 2017 #9
    Join Date : May 2016
    Massachusetts
    Posts : 238
    Windows 10 Pro 32-bit

    Quote Originally Posted by cereberus View Post
    Why don't you use a usb flash drive - far quicker and more reliable than a dvd?
    As for me, I'll do that.
      My ComputerSystem Spec
  10.    24 Jun 2017 #10
    Join Date : Nov 2016
    Posts : 422
    Windows 10

    Mine takes some minutes to load the Rescue disk CD, may well be 5 mins. The fact there is a lot of disc activity is a good thing, something is happening.
    You are loading up an OS, drivers and a version of Macrium, so that is not going to be swift.

    As for the DVD drive. If it is the slim line type where the laser diode mechanism come out in the tray. These seem to accumulate more dust on the lens, needs a careful gentle dust as it's on a sort of floating mount.

    USB/CD is a choice not a reliability issue.
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
Macrium Reflect free
Hi guys ,so I am using macrium free for backing up my laptop windows 10 pro which do not contain any dvd rom.i have a 252 gb external hard disk which I would like to use for creating the recovery disk or iso. my problem is that I do not want to...
Backup and Restore
General Tips Use Macrium Reflect Rescue Media to Fix Windows Boot Issues
Macrium Reflect is one of the most popular Windows backup programs. It is available both as a paid for version and as a free version. It is my personal choice, I have tested several other products failing to find one as easy to use and secure,...
Tutorials
Installation & Upgrade Macrium Reflect - Use Macrium Image to set up Dual / Multi Boot
If you ask me, Macrium Reflect should be obligatory, first application installed after installing Windows 10. Users often think it as just another backup application but in fact it is much more, giving more than any other free imaging solution....
Tutorials
Solved Can't Boot to Macrium Reflect Rescue Media
I installed Macrium Reflect so that I could create rescue media and disk images. My computer will not boot from the rescue media that I created. The creation seemed to go fine, all the appropriate files seem to be there. The rescue USB shows up in...
Backup and Restore
Macrium Reflect 6 free USB boot question
Hi All, I made a Macrium Reflect 6 free version boot USB drive and thought I would put it in to make sure it worked. I get two Kinston USB drive boot options, which one should I use to boot up with? Thanks 42369
Backup and Restore
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 11:24.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums