system restore, then reset (keeping fies) fails


  1. Posts : 17
    windows 10 home
       #1

    system restore, then reset (keeping fies) fails


    i had a problem that started immediately after cumulative update KB4015317., which.
    is an un-unistallable update.
    tried a system restore to a previous date.
    failed. tried all other restore points. all failed.
    tried reset saving files.
    that failed several times.
    booted into windows. now that i found a possible fix for the restore error, tried to do it again, but all restore points are gone.
    how to proceed?? original probem still exists.
    thanks.
      My Computer


  2. Posts : 42,737
    Win 10 Pro (22H2) (2nd PC is 22H2)
       #2

    Could you state the problem please?

    I can't find a reference to KB4015317

    Please can you post a screenshot of your Update history?

    There is a long thread about System Restore with a fix for the common error 80070091 on this forum, which you may have seen, if that's your error.

    Opinion and experience here is that system restore is useful when it works, but cannot be relied on to do so when needed. So we strongly and repeatedly recommend the much more complete and robust approach of disk imaging (Macrium reflect (free) e.g.).

    Assuming you don't have disk images, you could try an in-place upgrade repair. Given that the reset didn't work, there may be something more amiss.

    Please follow these steps. At least perform steps 1 & 2 as appropriate.

    1. Check your disk.
    Download and run Hard disk Sentinel (trial).
    If that reports your disk as ok, continue. Else post back with a screenshot of the result.

    2. Check your file system:

    From an admin command prompt
    [Windows key + X, click command prompt (admin)]
    chkdsk C: /F
    Your PC will need to restart.
    Make sure the result is clear or fixed- else do not proceed.
    Post back the result, which you can get after a restart as follows:
    How do I see the results of a CHKDSK that ran on boot? - Ask Leo!

    Now check the state of your problem, just to be sure it still exists.
    If not, finish here.

    3. Perform an In-place upgrade repair install
    If you are now confident you wish to return to the base build of your current Window version (and so eliminate all other updates), proceed.

    An In-place upgrade repair install will fix many things, but not those where the settings are not changed by the procedure.

    For this you need an installation medium with the same base build as you have installed, and x64 if you have a 64 bits OS, else x86 (32 bits).

    You should also make sure there's at least 500Mb of unallocated space on your system disk.

    Recommendation:
    Before you perform the following major repair procedure, do create a disk image (see below).

    Repair Install Windows 10 with an In-place Upgrade - Windows 10 Installation Upgrade Tutorials
    - this includes a link from which you can obtain a Windows 10 iso file (" download a Windows 10 ISO"), or create a Win 10 bootable medium.

    I would recommend creating the bootable medium, as this can be used
    - for any future in-place upgrade repair install
    - to boot from and use its recovery options should Windows become unbootable.
    - to clean install Windows

    This will refresh Windows, after the manner of a Windows installation.
    - all/most associations will be unchanged
    - all your programs will be left installed
    - However: if you have installed some on a 2nd drive, these must be uninstalled or reinstalled on C: - else you will get an error message that you can not keep your apps because they are in an unsupported directory.

    "You can't keep Windows settings, personal files and apps because your current version of Windows might be installed in an unsupported directory"

    - no personal data should be affected
    - you will lose any custom fonts
    - you will lose any customised system icons
    - you may need to re-establish your Wi-Fi connection
    - you will need to redo Windows updates subsequent to the build you have used for the repair install
    - Windows.old will be created
    - system restore will be turned off- you should turn it on again and I recommend you manually schedule a daily restore point.
    - you will need to redo any language downloads including the display language if you changed that)
    - inactive title bar colouring (if used) will be reset to default
    - if Qttabbar is installed, you need to re-enable it in explorer (Options, check Qttabbar)
    This is one of the better features of Win10: as each major build comes out, that's your updated reference build, and as updates are mostly cumulative, there will be few to do.


    Please consider using disk imaging regularly. It's a brilliant way to
    - preserve your system (and your sanity)
    - back up your data
    - restore your system to a previously working state in a relatively short time

    Recommended: Macrium Reflect (free/commercial) + boot disk/device + large enough external storage medium.
      My Computers


  3. Posts : 17
    windows 10 home
    Thread Starter
       #3

    [QUOTE=dalchina;995002]

    Could you state the problem please?

    answer--after KB4015217, all browsers except edge result in errors while trying to post any photos on any part of facebook.

    I can't find a reference to KB4015317

    answer--sorry, my bad. it was KB4015217, but this could be deduced from cumulative update and the approximate date. o, well.

    Please can you post a screenshot of your Update history?

    answer--i guess that's not necessary now.

    There is a long thread about System Restore with a fix for the common error 80070091 on this forum, which you may have seen, if that's your error.

    answer--did you read my post?? all restore points were lost in the reset attempts.

    Opinion and experience here is that system restore is useful when it works, but cannot be relied on to do so when needed. So we strongly and repeatedly recommend the much more complete and robust approach of disk imaging (Macrium reflect (free) e.g.).

    Assuming you don't have disk images, you could try an in-place upgrade repair. Given that the reset didn't work, there may be something more amiss.

    Please follow these steps. At least perform steps 1 & 2 as appropriate.

    1. Check your disk.
    Download and run Hard disk Sentinel (trial).
    If that reports your disk as ok, continue. Else post back with a screenshot of the result.

    answer--done previously.

    2. Check your file system:

    answer--done previously as well.

    3. Perform an In-place upgrade repair install
    If you are now confident you wish to return to the base build of your current Window version (and so eliminate all other updates), proceed.

    answer--doing this right at this moment--however, this option is what i avoided by doing a clean install in the first place. trying anyway (fingers crossed)

    I would recommend creating the bootable medium, as this can be used
    - for any future in-place upgrade repair install
    - to boot from and use its recovery options should Windows become unbootable.
    - to clean install Windows

    answer--i already have an ISO which i created long ago. i will not be using it now.

    will report back.
    thanks.
    Last edited by circe801; 17 Apr 2017 at 19:35.
      My Computer


  4. Posts : 42,737
    Win 10 Pro (22H2) (2nd PC is 22H2)
       #4

    answer--did you read my post?? all restore points were lost in the reset attempts.
    Yes. I just commented in passing. Not in any expectation that it would now help you as the rest of my response should have made quite clear.

    And just to be sure- the iso/bootable medium used for the in-place upgrade must match what you have installed.
      My Computers


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 06:20.
Find Us




Windows 10 Forums