Macrium Clone Problem


  1. Posts : 5
    Windows 10 Pro
       12 Feb 2017 #1

    Macrium Clone Problem


    Hello friends at TenForums,
    After cloning my Windows 10 drive with Macrium, my PC goes directly to bios. Windows will not boot unless I manually select the drive after bios starts. Attached is a photo of disk manager showing the disk in question with 3 partitions. I tried different utilities including Windows recovery startup repair and they give me different info, (drive letters, active partition, etc.). I thought it was just the BCD, but it appears to be more than that. Any help would be appreciated.
    Attached Thumbnails Attached Thumbnails diskmgr.jpg  
      My ComputerSystem Spec

  2.    12 Feb 2017 #2

    Have you tried the F key in BIOS setup that restores defaults - or possibly optimized defaults? It will probably be on the last "Save & Exit" screen and should be something like F9 or F10. Also try removing either the power or the SATA cable from the second drive and booting with it disconnected to see what happens.
      My ComputerSystem Spec


  3. Posts : 5
    Windows 10 Pro
    Thread Starter
       12 Feb 2017 #3

    Thank you for the response. I disconnected and reconnected the other drive and now Windows is booting normally. Would be interesting to know why the clone affected bios and the source drive. Thanks again.
      My ComputerSystem Spec


 

Related Threads
115585 I am getting a new hard drive WD1003FZEX this Friday to replace a 4 year old Seagate in my Dell XPS8700. I backup every day using Macrium Reflect 6.3 (paid). I always look at the Log and get NO errors, none !! In preparation I thought I...
macrium clone stuck in Backup and Restore
tried to clone disk from Macrium reflect free, and window stuck. unable to see bottom of window. any fix? 110851
Macrium Clone behaviour in Backup and Restore
Running Macrium/reflect trying to clone (not image) the C: drive. The c: drive has a system reserved partition (no drive letter assigned) with a normal C: partition. When a clone is attempted, Macrium assigns a drive letter to the system reserved...
Is Macrium a reliable programme to clone a system HDD to a much smaller SSD?
Hey, I'm trying to upgrade from a 750Gb hard drive to a 500Gb Hybrid drive, and I'm running into a few difficulties. I'm using the free version of Macrium Reflect, every walk through I've read says to select the partition with the windows symbol,...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 10:35.
Find Us