1.    11 Feb 2016 #1
    Join Date : Jul 2015
    Posts : 255
    windows 10 pro 64

    restore an image my w10 doesn't start inacessible boot device help


    Hi
    today i tried to copy my windows 10 ssd to a new ssd
    i used macrium reflex 6 and image for windows the last version

    after the boot , i disconnected my other drivers ,but i got inacessible boot device
    i can't boot anymore

    does somebody restore an image of windows 10 to a new ssd ?
    does somebdoy iusse the situation ?
    is there a fix?
    i tried macrium bootloader fix without luck
    thanks
      My ComputerSystem Spec
  2.    11 Feb 2016 #2
    Join Date : Oct 2013
    Posts : 1,962
    Windows 7

    To analyse your case we would need a picture of your disk management.
      My ComputerSystem Spec
  3.    11 Feb 2016 #3
    Join Date : Jul 2015
    Posts : 9,552
    Windows 10 Pro

    Quote Originally Posted by whs View Post
    To analyse your case we would need a picture of your disk management.
    Yep. Here's how:
    Disk Management - How to Post a Screenshot of - Windows 10 Forums
      My ComputerSystem Spec
  4.    11 Feb 2016 #4
    Join Date : Jul 2015
    Posts : 255
    windows 10 pro 64
    Thread Starter

    Quote Originally Posted by whs View Post
    To analyse your case we would need a picture of your disk management.
    Quote Originally Posted by NavyLCDR View Post
    hi
    here from w7
    Click image for larger version. 

Name:	IAU9qqE.jpg 
Views:	6 
Size:	55.7 KB 
ID:	63647
      My ComputerSystem Spec
  5.    11 Feb 2016 #5
    Join Date : Nov 2014
    UK
    Posts : 239
    Windows 10 Pro 64bit

    Try replacing with just the old SSD & make sure it boots - if it doesn't then the problem lies with the format of the old SSD & not with the Reflex image.

    Also, check that BIOS is set to boot from the SSD source.
      My ComputerSystem Spec
  6.    11 Feb 2016 #6
    Join Date : Jul 2015
    Posts : 255
    windows 10 pro 64
    Thread Starter

    Quote Originally Posted by WightWalker View Post
    Try replacing with just the old SSD & make sure it boots - if it doesn't then the problem lies with the format of the old SSD & not with the Reflex image.

    Also, check that BIOS is set to boot from the SSD source.
    hi
    i tried to restore the w10 image to the old ssd ,and it boots and works !
    but i tried terabyte and macrium 6 pro , and they are not able to restore the w10 to a different ssd
    i guess w10 stores somewhere information of the disk where is installed
      My ComputerSystem Spec
  7.    11 Feb 2016 #7
    Join Date : Nov 2014
    UK
    Posts : 239
    Windows 10 Pro 64bit

    Quote Originally Posted by drugo View Post
    hi
    i tried to restore the w10 image to the old ssd ,and it boots and works !
    but i tried terabyte and macrium 6 pro , and they are not able to restore the w10 to a different ssd
    i guess w10 stores somewhere information of the disk where is installed
    I've used an SSD Reflex Image to create a operating system on 2 internal hard drives on my PC in addition to the SSD & ALL 3 successfully boot.

    The only time I've had a problem with Reflex is when I used a different PC to take an image of the Windows 10 OS from hard disk using an external USB hard disk adaptor & then transferred the image back to a new SSD. Unfortunately, the hard disk ID was transferred to the SSD so only 1 device was seen by Windows until I used Diskpart to change this.

    Personally, I don't think that the image taken is restricted to restore back the same device, nor do I think that the capacity of the SSD/HD would be an issue unless it was smaller.

    Hope you manage to sort this out - best of luck.
      My ComputerSystem Spec
  8.    12 Feb 2016 #8
    Join Date : Jul 2015
    Posts : 255
    windows 10 pro 64
    Thread Starter

    hi
    i have fixed it and solved
    i disconnected all drives except for the 128 GB Win10 and the new SSD.
    and it worked
    hope could be usefull for other users
      My ComputerSystem Spec
  9.    12 Feb 2016 #9
    Join Date : Nov 2014
    UK
    Posts : 239
    Windows 10 Pro 64bit

    Quote Originally Posted by drugo View Post
    hi
    i have fixed it and solved
    i disconnected all drives except for the 128 GB Win10 and the new SSD.
    and it worked
    hope could be usefull for other users
    Years ago, I had a situation with two hard disks both with an installed operating system, where they would only boot when both were connected; removing one prevented the other from booting which is obviously not right.

    I would suggest that you remove the new SSD to make sure the old SSD boots.

    Then connect just the new SSD & check that it boots OK

    If either or both fails, then it would suggest that there are files that need to accessed on both SSDs to ensure a satisfactory boot; that being the case, I would suggest a clean build of the new SSD with no other drives connected which would ensure that the stand alone SSD will boot.
      My ComputerSystem Spec

 


Similar Threads
Thread Forum
Solved Image restore on larger SSD
Is it possible to restore a Windows 10 system image taken from a 60Gb SSD to a new 240gb SSD on the same computer? I am thinking of using the windows 10 installation USB to boot then repair to recover the image onto the 240Gb SSD. Would this work?...
Installation and Upgrade
Solved System restore doesn't restore uninstalled software.
Maybe I have a misunderstanding of how System Restore works. Yesterday I uninstalled a program that I'd like to now get back. The company that made the program no longer offers archive downloads for that program in particular. Today it occurred to...
Software and Apps
Can't Restore from System Image
I created a system image on a Seagate external hard drive using Windows 10 Home, and I created a restore disc for booting with an external BUFFALO DVD drive connected to a USB port. I went into the UEFI and set my BUFFALO drive as the first drive to...
Backup and Restore
Solved Restore with disk image
How do I reinstall Windows 10 from a USB Disk Image
Installation and Upgrade
Restore old image then upgrade
It seems like a good idea to restore my Win 8.1 installation to a time prior to when I installed a lot of software that I no longer need. So I plan to restore a Windows Image I made last December, then do the upgrade to 10. I plan to use the...
Backup and Restore
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 07:27.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums