Macrium - Setup Macrium Rescue to boot from an Internal SSD

Page 1 of 2 12 LastLast

  1. Posts : 12
    Windows10
       #1

    Macrium - Setup Macrium Rescue to boot from an Internal SSD


    Hey Guys

    I was a poster on the SevenForums, but it appears that usernames and logins don't transfer from there? Anyhow ive registered a new account here to post my (hopefully simple) query:

    Ive just followed Brinks amazing Clean Install W10 without having to upgrade guide and it went flawlessly. I'm now in 10 and have been installing drivers, updates and AV/Malware scans and setup. All done - ready to make a post install image using Macrium (which I have also used before on 7)

    I was intrigued with this guide though: https://www.tenforums.com/general-dis...sb-hd-ssd.html

    I have followed all the steps (I believe successfully) and now have a separate SSD (not my OS SSD) with an Active Primary partition of 512mb. Ive copied the ISO which macrium created for the Rescue disc to it etc.

    I then tried to get into the boot menu he shows in the guide and that's where Ive come unstuck. I have literally no idea how to boot from this rescue disc on my other SSD. I'm not even sure copying the ISO to it makes it a rescue environment I can boot from.

    Happy to answer any questions or post screen snips of whats going on.

    Any help greatly appreciated

    thanks
    Matt
      My Computer

  2. topgundcp's Avatar
    Posts : 2,618
    MintMate19x64 Win10Prox64
       #2

    It was my post. You have to copy the content of the ISO, not the ISO
      My Computer


  3. Posts : 12
    Windows10
    Thread Starter
       #3

    Hey Topgundcp

    Thanks for your quick response. whilst I was waiting for a reply I realised my error and was just figuring out how to mount the iso which macrium had created.

    Long story short, ive now moved the .iso to another drive, mounted it there and then copied the mounted contents to my M drive (Active, Primary) and then deleted the drive letter.

    I just did a successful boot from it using W10 UEFI bootloader interface (I really have no idea what its called....I got to it via settings > update & security >recovery > advanced startup

    In there I stumbled upon launching a UFEI rescue and a few seconds later I was in the macrium environment.

    Sounds OK to you? Seemed OK to me

    Many thanks Matt
      My Computer

  4. topgundcp's Avatar
    Posts : 2,618
    MintMate19x64 Win10Prox64
       #4

    I got to it via settings > update & security >recovery > advanced startup
    You should not have to do this even though it works but what if your PC became unbootable ?
    You can boot it via the Boot Menu, just select the item from the list pointed to the SSD where you have the rescue copied to.
      My Computer


  5. Posts : 12
    Windows10
    Thread Starter
       #5

    That's a very good point. I do need to be able to boot from that SSD when/if W10 is unbootable.

    This is where I am struggling. I honestly do not know how to get into the boot menu from a cold boot? It takes W10 6 seconds go from me pressing the power button to being asked for a login. Hitting Del will get me into bios, but I don't know how to get to the boot menu which you show in the final picture of your guide.

    For what its worth I'm using an asus motherboard (Maximus Ranger VII). Sorry for coming across so ignorant of this probably simple thing.
      My Computer

  6. topgundcp's Avatar
    Posts : 2,618
    MintMate19x64 Win10Prox64
       #6

    You need to look in the Manual for your MB to find out which key or function key to display the boot menu. Each manufacturer set it up differently. I use MSI Mother board and DEL key will get into BIOS, F11 will display the boot menu.
      My Computer


  7. Posts : 12
    Windows10
    Thread Starter
       #7

    Many thanks top gun.
    Found its the f8 key, but I had to add a 2 sec delay into the boot through bios to get f8 to register. It barely registered hammering del just to get to bios it boots to quick in uefi mode.

    F8 got me to the menu and there I can choose to boot from the ssd with the macrium rescue environment.

    Really appreciate your help
    Matt
      My Computer

  8. topgundcp's Avatar
    Posts : 2,618
    MintMate19x64 Win10Prox64
       #8

    Great. Glad you got it sorted.
    It's a nice feature that you can delay the POST for 2 seconds, gives you time to access the BIOS/Boot Menu.
      My Computer


  9. Posts : 12
    Windows10
    Thread Starter
       #9

    My asus board allows you to delay post (after bios logo) for between 0 and 10 seconds.

    The temptation is obviously for a rapid boot, and it's been set to 0 under Windows 7 for 2 years, non uefi, and I could always get in.

    0 secs under w10 with full uefi disk structure and the windows logo appears 1 second in after I hit power lol.
      My Computer

  10. topgundcp's Avatar
    Posts : 2,618
    MintMate19x64 Win10Prox64
       #10

    OK. Now that you have everything set. From Admin command, run:
    1. Dism /Online /Cleanup-Image /StartComponentCleanup
    2. %SystemRoot%\System32\Cmd.exe /c Cleanmgr /sageset:65535 & Cleanmgr /sagerun:65535
      Put a check mark on everything except "Setup Log Files"
    3. Win+X->Program and Features then turn on Net Framework right away.
    4. Boot up Macrium and make your 1st backup.
      My Computer


 

Related Threads
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 16:35.
Find Us




Windows 10 Forums