Macrium Reflect 8 Update Discussion

Page 60 of 64 FirstFirst ... 10505859606162 ... LastLast
  1. kado897's Avatar
    Posts : 41,229
    Windows 10 Home 64bit 21H1 and insider builds
       #591

    simrick said:
    Hi Keith.
    What a mess I had this morning! And it was further complicated with a VPN in the mix, and a new router to boot. I have a new NIC in this rig now, the VPN is removed, the router is stabilized, and everything appears to be working well.

    I looked at the properties of both disks, and the amount of data on each was very close, so it looked like the clone finished, and the difference was a few files I had downloaded after the clone had begun, which I intended to manually transfer over later. But, to be safe, I ran a Robocopy of all folders from source to destination, and it ran very fast. I had one issue, where the message said "unable to write to source" for a folder which had about 5 items in it. Afterwards, I checked the destination: all files were there; everything appeared to be intact, so I am not sure why I got the message from Robocopy about that. But everything else appears to be fine - Robocopy did not have to copy anything, just check, verify and go on to the next item.

    Do you think I should still run the clone again and start from scratch? I've opened documents, photos, PDFs and various other files, and they've all been intact. I think I'm good to go. I've put the destination drive in the system, replacing the source drive, and it seems to all be in good shape. But you've got me worrying about this "sector copy" issue....
    I'm just not sure @simrick. The problem with sector copy is that you may have some partial files. I don't know how good Robocopy would be in identifying those but that may be why Robocopy threw a hissy fit on that folder. The safest thing would be to do it over. Sorry Simrick.
      My Computer

  2. simrick's Avatar
    Posts : 16,209
    W10Prox64
       #592

    kado897 said:
    I'm just not sure @simrick. The problem with sector copy is that you may have some partial files. I don't know how good Robocopy would be in identifying those but that may be why Robocopy threw a hissy fit on that folder. The safest thing would be to do it over. Sorry Simrick.
    Hi.
    Well, I took your advice and re-ran the clone. It completed successfully!
    Then I started a new File & Folder backup, because I was already having issues/failures and recoveries with the current one, ever since I updated to version 8. I had a ticket open with Macrium, but they couldn't figure out the problem, and suggested I just start new, so I did.

    All that being done now, finally, and I have everything working. Now to update my system! (Yeah, I'm a glutton for punishment!)

    I thought I heard that 21H1 breaks printing - is that true?

    Thanks for your help!
      My Computer

  3. OldMike65's Avatar
    Posts : 110,706
    Windows 10 Pro (x64) 21H1 19043.1083
       #593

    simrick said:
    Hi.
    Well, I took your advice and re-ran the clone. It completed successfully!
    Then I started a new File & Folder backup, because I was already having issues/failures and recoveries with the current one, ever since I updated to version 8. I had a ticket open with Macrium, but they couldn't figure out the problem, and suggested I just start new, so I did.

    All that being done now, finally, and I have everything working. Now to update my system! (Yeah, I'm a glutton for punishment!)

    I thought I heard that 21H1 breaks printing - is that true?

    Thanks for your help!
    I've been running 21H1 since it was released Simrick, and my printer works fine...
    My printer is almost new thou ...its about 6 months old.
      My Computers

  4. simrick's Avatar
    Posts : 16,209
    W10Prox64
       #594

    OldMike65 said:
    I've been running 21H1 since it was released Simrick, and my printer works fine...
    That's good to know. I remember a printing problem a year or so ago, but don't have anything on a printing problem for this year. Still, I've just spent 4 hours on an HP printer and can't get the thing to print for nothing!
      My Computer

  5. Bree's Avatar
    Posts : 20,035
    10 Home x64 (21H1) (10 Pro on 2nd pc)
       #595

    simrick said:
    ... I remember a printing problem a year or so ago, but don't have anything on a printing problem for this year....

    The last printing known issue I can find was this one in 2004/20H1...

    After installing updates released March 9, 2021 or March 15, 2021, you might get unexpected results when printing from some apps. Issues might include:

    • Elements of the document might print as solid black/color boxes or might be missing, including barcodes, QR codes, and graphics elements, such as logos.
    • Table lines might be missing. Other alignment or formatting issues might also be present.
    • Printing from some apps or to some printers might result in a blank page or label.
    https://docs.microsoft.com/en-us/win...h2#1573msgdesc

    Actually it affected all versions of Windows that got a Patch Tuesday update in March, including Windows 8. Got fixed long before 21H1 was released.
      My Computers

  6. steve108's Avatar
    Posts : 13,046
    19041.1083 - 2004/20H1 Home x64
       #596

    simrick said:
    That's good to know. I remember a printing problem a year or so ago, but don't have anything on a printing problem for this year. Still, I've just spent 4 hours on an HP printer and can't get the thing to print for nothing!
    KB5003637 update is causing printer problems and breaking the taskbar in Windows 10 some have experienced printing problems after June KB.
      My Computer

  7. simrick's Avatar
    Posts : 16,209
    W10Prox64
       #597

    Bree said:
    The last printing known issue I can find was this one in 2004/20H1...

    https://docs.microsoft.com/en-us/win...h2#1573msgdesc

    Actually it affected all versions of Windows that got a Patch Tuesday update in March, including Windows 8. Got fixed long before 21H1 was released.
    Thanks Bree, you've confirmed what I thought/remembered. Not sure why this printer is acting up - it's not that old: an HP Envy AIO 7855 bought about 14 months ago. Printer works with a cell phone, it's on the network, the computer see it and loads the drivers, but it will not print. Errors out when I try to scan. I am baffled.
      My Computer

  8. simrick's Avatar
    Posts : 16,209
    W10Prox64
       #598

    steve108 said:
    Oh! What is this? I have to read........
    Thanks so much Steve108!
      My Computer

  9. kado897's Avatar
    Posts : 41,229
    Windows 10 Home 64bit 21H1 and insider builds
       #599

    simrick said:
    Hi.
    Well, I took your advice and re-ran the clone. It completed successfully!
    Then I started a new File & Folder backup, because I was already having issues/failures and recoveries with the current one, ever since I updated to version 8. I had a ticket open with Macrium, but they couldn't figure out the problem, and suggested I just start new, so I did.

    All that being done now, finally, and I have everything working. Now to update my system! (Yeah, I'm a glutton for punishment!)

    I thought I heard that 21H1 breaks printing - is that true?

    Thanks for your help!
    Excellent
      My Computer

  10. phrab's Avatar
    Posts : 753
    windows 10 professional 64-bit, 21H1
       #600

    simrick said:
    Hi.
    I thought I heard that 21H1 breaks printing - is that true?
    I have 21H1 & it didn't cause any more problems with my HP Officejet printer than I already had. For some reason, I have to unplug it, wait for it to shut down, & then plug it in to get it to connect...but I've had that problem since 2017.
      My Computers


 
Page 60 of 64 FirstFirst ... 10505859606162 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 17:15.
Find Us




Windows 10 Forums