Windows 10: Macrium Reflect Boot Log: Unable to Load Driver (Error 0xe000022f) Solved

Page 1 of 2 12 LastLast
  1.    1 Week Ago #1

    Macrium Reflect Boot Log: Unable to Load Driver (Error 0xe000022f)


    After years with Acronis, and having read all these good words in the forum (especially @Kari, was pretty convincing! ) I decided to move to Macrium Reflect. So to start with it, I downloaded the v7 Free.
    Installed it, created the Rescue Media (USB) successfully and created an image of the system.

    Then I tried to test that the laptop boots from the Rescue Media and Macrium Reflect can “see” the image and everything was just fine.

    After rebooting, I noticed a C:\rescuepe.log which contained the following:

    Macrium Reflect Boot Log
    -------------------------------------

    Started 10/02/2018 11:37 PM v7.1.2885

    DrvLoad: Successfully loaded x:\drivers\Network\VEN_14E4_DEV_4365\bcmwdi.inf.
    DrvLoad: Unable to load x:\drivers\Network\VEN_14E4_DEV_4365\netvwifibus.inf (Error 0xe000022f).

    Any idea why the netvwifibus.inf cannot be loaded. (it’s the Broadcom BCM43142 802.11 bgn Wi-Fi M.2 Adapter) and since I'm a newbie with MR, would that be a problem in a future use of the Rescue USB?

    Thanks.
    Last edited by ddelo; 1 Week Ago at 18:39.
      My ComputerSystem Spec

  2.    1 Week Ago #2

    It appears that you do not have a Driver for that on your rescue media.
      My ComputerSystem Spec

  3.    1 Week Ago #3

    Thanks. And how do I add it?
      My ComputerSystem Spec

  4.    1 Week Ago #4

    ddelo said: View Post
    Thanks. And how do I add it?
    Follow The Images Below:

    Click image for larger version. 

Name:	Capture.PNG 
Views:	31 
Size:	29.4 KB 
ID:	176733

    Click image for larger version. 

Name:	Capture1.PNG 
Views:	31 
Size:	20.3 KB 
ID:	176734

    Click image for larger version. 

Name:	Untitled.png 
Views:	3 
Size:	104.8 KB 
ID:	176735

    If this does not help try here:

    Macrium Support Forum
      My ComputerSystem Spec

  5.    1 Week Ago #5

    So you're telling me to create the Rescue Media again?

    Click image for larger version. 

Name:	MR_01.png 
Views:	31 
Size:	24.5 KB 
ID:	176736

    This is what I'm getting. The VEN_14E4_DEV_4365\netvwifibus.inf that fails to load shows OK (at least that's what I understand) from the screenshot. As for "Check for unsupported devices..." in the Next screen is unchecked!
    So why the file is not loaded?
    I read in another post that WiFi is not supported in WinPE...could that be related?
      My ComputerSystem Spec

  6.    1 Week Ago #6

    ddelo said: View Post
    So you're telling me to create the Rescue Media again?

    Click image for larger version. 

Name:	MR_01.png 
Views:	31 
Size:	24.5 KB 
ID:	176736

    This is what I'm getting. The VEN_14E4_DEV_4365\netvwifibus.inf that fails to load shows OK (at least that's what I understand. As for "Check for unsupported devices..." in the Next screen is unchecked!
    So why the file is not loaded?
    I read in another post that WiFi is not supported in WinPE...could that be related?
    Wi-Fi could be not supported, I do not use it, but if it is already on your rescue media then no need to recreate it. The MR Forum has qualified people that really know MR and they also have a support site. You can custom build it per this post.

    Windows 10 Recovery Tools - Bootable Rescue Disk - Windows 10 Forums
      My ComputerSystem Spec

  7.    1 Week Ago #7

    Thanks a lot, for your time! Take care.
      My ComputerSystem Spec

  8.    1 Week Ago #8

    Good Luck
      My ComputerSystem Spec


  9. Posts : 28
    Windows 10 Pro 64bit 1709 / 16299.248
       6 Days Ago #9

    Thanks to the suggestions I've found here, I too have become a big fan of Macrium Reflect and yet I've always wondered about similar errors in my rescuepe.log ever since I started using it 2 years ago.

    All my *.mrimg image files are on an external HDD; so, like others, I have no need for WiFi during a Macrium rescue disk restore operation. FWIW, and having successfully restored dozens of images, I've always just ignored them..

    And yet it is more comforting now to know this WinPE connection. Again, thanks to the members of this forum, I struggle less and less with every release, while sleeping a little better every night.


    Macrium Reflect Boot Log
    ------------------------

    Started 7/15/2017 9:25 AM v6.2.1549

    DrvLoad: Unable to load x:\drivers\Network\VEN_168C_DEV_0032\athw8x.inf (Error 0xe000022f).

    DrvLoad: Unable to load x:\drivers\Network\VEN_168C_DEV_0032\netvwifibus.inf (Error 0xe000022f).
      My ComputersSystem Spec

  10.    6 Days Ago #10

    Josey Wales said: View Post
    Wi-Fi could be not supported...
    Correct, no Wifi from Rescue Environment: https://knowledgebase.macrium.com/di...+in+Windows+PE
      My ComputerSystem Spec


 
Page 1 of 2 12 LastLast

Related Threads
Windows 10 Pro, Toshiba Satellite upgraded from OEM Win 8. Created system image w/ Macrium and restored it to a new second HD(HD2). Both drives had a lot of partitions due to Win 8 upgraded to Win 8.1 and back to Win 8 prior to upgrade to Win 10....
Hi, I'm trying last Macrium Reflect Free 64-bit UEFI version (6.3 build 1835), and it's working great. Only thing I'd like to know, if there are some license restrictions on free version, to the wifi drivers using usb rescue media. When I...
If you ask me, Macrium Reflect should be obligatory, first application installed after installing Windows 10. Users often think it as just another backup application but in fact it is much more, giving more than any other free imaging solution....
Macrium Reflect boot menu option in Backup and Restore
Hi, recently started using Reflect, moving away from TrueImage. I'm pretty happy with it so far, except for the outlandish price (yea, I know, free version fine for most but I like to password protect my images). I notice there's an option to put...
Solved Macrium Reflect error help? in Backup and Restore
Hi All, I have the latest free version of Macrium Reflect. I think that I can only get support from the Macrium site with the full paid version. Since the big Windows 10 update last week, I seem to be getting errors in the backup logs. I have...
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 21:23.
Find Us