Macrium Reflect Boot Log: Unable to Load Driver (Error 0xe000022f)

Page 1 of 2 12 LastLast

  1. Posts : 2,450
    Windows 10 Pro x64
       #1

    Macrium Reflect Boot Log: Unable to Load Driver (Error 0xe000022f)


    After years with Acronis, and having read all these good words in the forum (especially @Kari, was pretty convincing! :) ) I decided to move to Macrium Reflect. So to start with it, I downloaded the v7 Free.
    Installed it, created the Rescue Media (USB) successfully and created an image of the system.

    Then I tried to test that the laptop boots from the Rescue Media and Macrium Reflect can “see” the image and everything was just fine.

    After rebooting, I noticed a C:\rescuepe.log which contained the following:

    Macrium Reflect Boot Log
    -------------------------------------

    Started 10/02/2018 11:37 PM v7.1.2885

    DrvLoad: Successfully loaded x:\drivers\Network\VEN_14E4_DEV_4365\bcmwdi.inf.
    DrvLoad: Unable to load x:\drivers\Network\VEN_14E4_DEV_4365\netvwifibus.inf (Error 0xe000022f).

    Any idea why the netvwifibus.inf cannot be loaded. (it’s the Broadcom BCM43142 802.11 bgn Wi-Fi M.2 Adapter) and since I'm a newbie with MR, would that be a problem in a future use of the Rescue USB?

    Thanks.
    Last edited by ddelo; 11 Feb 2018 at 18:39.
      My Computer


  2. Posts : 26,416
    Windows 11 Pro 22631.3374
       #2

    It appears that you do not have a Driver for that on your rescue media.
      My Computer


  3. Posts : 2,450
    Windows 10 Pro x64
    Thread Starter
       #3

    Thanks. And how do I add it?
      My Computer


  4. Posts : 26,416
    Windows 11 Pro 22631.3374
       #4

    ddelo said:
    Thanks. And how do I add it?
    Follow The Images Below:

    Macrium Reflect Boot Log: Unable to Load Driver (Error 0xe000022f)-capture.png

    Macrium Reflect Boot Log: Unable to Load Driver (Error 0xe000022f)-capture1.png

    Macrium Reflect Boot Log: Unable to Load Driver (Error 0xe000022f)-untitled.png

    If this does not help try here:

    Macrium Support Forum
      My Computer


  5. Posts : 2,450
    Windows 10 Pro x64
    Thread Starter
       #5

    So you're telling me to create the Rescue Media again?

    Macrium Reflect Boot Log: Unable to Load Driver (Error 0xe000022f)-mr_01.png

    This is what I'm getting. The VEN_14E4_DEV_4365\netvwifibus.inf that fails to load shows OK (at least that's what I understand) from the screenshot. As for "Check for unsupported devices..." in the Next screen is unchecked!
    So why the file is not loaded?
    I read in another post that WiFi is not supported in WinPE...could that be related?
      My Computer


  6. Posts : 26,416
    Windows 11 Pro 22631.3374
       #6

    ddelo said:
    So you're telling me to create the Rescue Media again?

    Macrium Reflect Boot Log: Unable to Load Driver (Error 0xe000022f)-mr_01.png

    This is what I'm getting. The VEN_14E4_DEV_4365\netvwifibus.inf that fails to load shows OK (at least that's what I understand. As for "Check for unsupported devices..." in the Next screen is unchecked!
    So why the file is not loaded?
    I read in another post that WiFi is not supported in WinPE...could that be related?
    Wi-Fi could be not supported, I do not use it, but if it is already on your rescue media then no need to recreate it. The MR Forum has qualified people that really know MR and they also have a support site. You can custom build it per this post.

    Windows 10 Recovery Tools - Bootable Rescue Disk - Windows 10 Forums
      My Computer


  7. Posts : 2,450
    Windows 10 Pro x64
    Thread Starter
       #7

    Thanks a lot, for your time! Take care. :)
      My Computer


  8. Posts : 26,416
    Windows 11 Pro 22631.3374
       #8

    Good Luck:)
      My Computer


  9. Posts : 915
    Windows 10 Pro 64bit 22H2 19045.3324
       #9

    Thanks to the suggestions I've found here, I too have become a big fan of Macrium Reflect and yet I've always wondered about similar errors in my rescuepe.log ever since I started using it 2 years ago.

    All my *.mrimg image files are on an external HDD; so, like others, I have no need for WiFi during a Macrium rescue disk restore operation. FWIW, and having successfully restored dozens of images, I've always just ignored them..

    And yet it is more comforting now to know this WinPE connection. Again, thanks to the members of this forum, I struggle less and less with every release, while sleeping a little better every night.


    Macrium Reflect Boot Log
    ------------------------

    Started 7/15/2017 9:25 AM v6.2.1549

    DrvLoad: Unable to load x:\drivers\Network\VEN_168C_DEV_0032\athw8x.inf (Error 0xe000022f).

    DrvLoad: Unable to load x:\drivers\Network\VEN_168C_DEV_0032\netvwifibus.inf (Error 0xe000022f).
      My Computers


  10. Posts : 1,579
    Windows 10 Pro
       #10

    Josey Wales said:
    Wi-Fi could be not supported...
    Correct, no Wifi from Rescue Environment: https://knowledgebase.macrium.com/di...+in+Windows+PE
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 03:53.
Find Us




Windows 10 Forums