Page 8 of 10 FirstFirst ... 678910 LastLast
  1.    24 Apr 2017 #71
    Join Date : Apr 2015
    Posts : 12,819
    W10Prox64

    Quote Originally Posted by Bruce SX View Post
    Got it with the F2 key.......finally. I can start at post #53 now...and it's almost lunchtime. I can wait.

    YAY!
      My ComputerSystem Spec
  2.    24 Apr 2017 #72
    Join Date : Apr 2017
    Posts : 44
    Win 7
    Thread Starter

    ok


    Now that I'm into BIOS at the top of the page I chose Boot from the tabs listed.

    In the boot menu I have the following:
    BOOT CONFIGURATION
    Fast Boot [enabled]
    Launch csm [disabled]

    BOOT OPTION PRIORITIES
    Boot option #1 [Windows boot manage....]
    Boot option #2 [Sandisk Cruze....]

    > Add New Boot Option
    > Delete Boot Option

    So, I highlighted Boot Option #2 pressed enter

    The result was a pop up window that contained the following:

    Boot Option #2
    Widows Boot Manager (PO: ST500LT0)12-1DG142
    UEFI: SanDisk Cruzer Glide 2.01 (this is highlighted in the window)
    Disabled

    I hit enter again and Boot option #2 above now is written as: [UEFI: SanDisk Cruze]

    Do I tap enter again?

    EDIT: From This:
    BOOT OPTION PRIORITIES
    Boot option #1 [Windows boot manage....]
    Boot option #2 [Sandisk Cruze....]

    To this:
    BOOT OPTION PRIORITIES
    Boot option #1 [Windows boot manage....]
    Boot option #2 [UEFI: Sandisk Cruze....]
      My ComputerSystem Spec
  3.    24 Apr 2017 #73
    Join Date : Apr 2015
    Posts : 12,819
    W10Prox64

    Quote Originally Posted by Bruce SX View Post
    Now that I'm into BIOS at the top of the page I chose Boot from the tabs listed.

    In the boot menu I have the following:
    BOOT CONFIGURATION
    Fast Boot [enabled]
    Launch csm [disabled]

    BOOT OPTION PRIORITIES
    Boot option #1 [Windows boot manage....]
    Boot option #2 [Sandisk Cruze....]

    > Add New Boot Option
    > Delete Boot Option

    So, I highlighted Boot Option #2 pressed enter

    The result was a pop up window that contained the following:

    Boot Option #2
    Widows Boot Manager (PO: ST500LT0)12-1DG142
    UEFI: SanDisk Cruzer Glide 2.01 (this is highlighted in the window)
    Disabled

    I hit enter again and Boot option #2 above now is written as: [UEFI: SanDisk Cruze]

    Do I tap enter again?

    EDIT: From This:
    BOOT OPTION PRIORITIES
    Boot option #1 [Windows boot manage....]
    Boot option #2 [Sandisk Cruze....]

    To this:
    BOOT OPTION PRIORITIES
    Boot option #1 [Windows boot manage....]
    Boot option #2 [UEFI: Sandisk Cruze....]
    We want Boot Option #1 to be the SanDisk Cruzer and boot option #2 doesn't matter (it will probably change to Windows Boot Manager).

    FAST BOOT should be set to disabled.

    The system should then boot to the flash drive.

    I have to leave now for a while. Will be back later. I'm sorry, can't be helped.
      My ComputerSystem Spec
  4.    24 Apr 2017 #74
    Join Date : Apr 2017
    Posts : 44
    Win 7
    Thread Starter

    Hi Simrick


    Not a problem. I will see what I may be able to accomplish in the interim

      My ComputerSystem Spec
  5.    24 Apr 2017 #75
    Join Date : Apr 2015
    Posts : 12,819
    W10Prox64

    I'm back for a bit. How are we doing?
      My ComputerSystem Spec
  6.    24 Apr 2017 #76
    Join Date : Apr 2017
    Posts : 44
    Win 7
    Thread Starter

    Quote Originally Posted by simrick View Post
    I'm back for a bit. How are we doing?
    I stopped to eat and shower.

    I got to where the only option is #1 and it is: UEFI SanDisk cruzer

    I left it there. Am I ready to go for it now?
      My ComputerSystem Spec
  7.    24 Apr 2017 #77
    Join Date : Apr 2015
    Posts : 12,819
    W10Prox64

    Quote Originally Posted by Bruce SX View Post
    I stopped to eat and shower.

    I got to where the only option is #1 and it is: UEFI SanDisk cruzer

    I left it there. Am I ready to go for it now?
    Yes, I think so.
      My ComputerSystem Spec
  8.    24 Apr 2017 #78
    Join Date : Apr 2017
    Posts : 44
    Win 7
    Thread Starter

    Quote Originally Posted by simrick View Post
    Yes, I think so.
    It told me no go. I had disabled Boot option #1 [Windows boot manage....] in order to leave just Boot option #2 [Sandisk Cruze....]n which then appeared by itself as boot option #1

    When I hit enter it told me that with secure boot disabled It couldn't boot.

    I closed out BIOS without saving changes.

    So....I am back trying to get into BIOS again using the only method that worked once.....which is the F2 key while starting.

    Got in again!


    EDIT

    Stopped at Advanced Tab this time

    The choices are:

    Internal pointing device [enabled]
    Wake on Lid Opening [enabled]
    Power Off Energy Saving [enabled]

    Intel Virtualization Technology [enabled]
    OS Selection [Windows 8.x]

    >Sata Configuration
    >Network Stack Configuration
    >USB Configuration


      My ComputerSystem Spec
  9.    24 Apr 2017 #79
    Join Date : Apr 2015
    Posts : 12,819
    W10Prox64

    Quote Originally Posted by Bruce SX View Post
    It told me no go. I had disabled Boot option #1 [Windows boot manage....] in order to leave just Boot option #2 [Sandisk Cruze....]n which then appeared by itself as boot option #1

    When I hit enter it told me that with secure boot disabled It couldn't boot.

    I closed out BIOS without saving changes.

    So....I am back trying to get into BIOS again using the only method that worked once.....which is the F2 key while starting.
    Okay, so no changes have been saved to the BIOS.

    Let's try getting into the one-time boot menu without modifying the BIOS.

    You should press the power button, and then immediately start tapping the ESC key (tap tap tap tap tap) until it brings up a menu to select the boot device. There you should be able to select the flash drive. I have even seen some flash drive selections indicated as PMAP, but that is usually on older systems.

    Some systems need Secure Boot off, and some don't - I have no idea why it is that way....
      My ComputerSystem Spec
  10.    24 Apr 2017 #80
    Join Date : Apr 2017
    Posts : 44
    Win 7
    Thread Starter

    Quote Originally Posted by simrick View Post
    Okay, so no changes have been saved to the BIOS.

    Let's try getting into the one-time boot menu without modifying the BIOS.

    You should press the power button, and then immediately start tapping the ESC key (tap tap tap tap tap) until it brings up a menu to select the boot device. There you should be able to select the flash drive. I have even seen some flash drive selections indicated as PMAP, but that is usually on older systems.

    Some systems need Secure Boot off, and some don't - I have no idea why it is that way....
    Just read this.

    Should I then do the Esc tab?
      My ComputerSystem Spec

 
Page 8 of 10 FirstFirst ... 678910 LastLast


Similar Threads
Thread Forum
Solved Eliminate Groove Music
How to I get rid of that Groove Music garbage?
General Support
Solved Eliminate Sign-On Password
I am the only person to use my Windows 10 desktop. I would like to eliminate the password request that comes up every time I restart. Thanks, cb
User Accounts and Family Safety
How To Eliminate Sing In & Password Req's. From Sr. Citizen
Hello, Sr. Citizen now, very, so will blame my ignorance on that. Have a Dell Desktop pc. Driving Me, my Wife, and other family members crazy with the logging in/Password requirements each time we turn on the PC. My old W7 PC didn't have it....
User Accounts and Family Safety
Solved Eliminate use of password
I've got Win installed with one minor problem. I don't like to use the password when I start Windows. So I did what is generally done. I got the Run box and typed in netplwiz which has always worked or me. Now it works when it makes up its mind to....
General Support
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 07:15.
Find Us
Twitter Facebook Google+ Ten Forums iOS App Ten Forums Android App



Windows 10 Forums