Page 1 of 4 123 ... LastLast

  1. Joined : Jun 2015
    Posts : 80
    Win 10 Pro 64bit - Build
       15 Oct 2016 #1

    Win 10 Pro 64 no longer updates - apparently a number of weeks now?


    Having trouble with 10 updating...notice the following recently per the attached jpg.

    All updates - Win 10 and other programs - appear to be failing. Not sure when this started but can't figure out how to fix it ?

    Also the new Anniversary Update never completed downloading...took hours to get to 99%...but then stayed there for over 20 hours ?

    1st where do I start to get just regular updates (weeks and weeks apparently) to actually download install without failing as per attached jpg ? Anniversary update can be addressed later ?

    Thanks....TRinAz
    Attached Thumbnails Attached Thumbnails failed updates.JPG  
      My System SpecsSystem Spec


  2. Joined : Jul 2015
    Posts : 169
    Windows 10 Pro
       15 Oct 2016 #2

    Hi, have you ran DISM yet as per this article?
    How to Repair Corrupted Windows System Files with the SFC and DISM Commands

    Run the DISM Command to Fix SFC Problems

    On Windows 10, 8.1, and 8, the Deployment Image & Servicing Management tool can fix component store corruption that prevents the SFC command from working properly.
    To run this command, open a Command Prompt as administrator. Type the following command and press Enter. DISM will check your Windows component store for corruption and automatically fix any problems it finds.
    Code:
    DISM /Online /Cleanup-Image /RestoreHealth
    Allow the command to finish running before closing the Command Prompt window. This may take five to ten minutes. Its normal for the progress bar to stay at 20 percent for a while, so dont worry about that.
    If the DISM command changed anything, restart your computer afterwards. You can now run the SFC command again and it would be able to replace any corrupted files with the correct ones.

    Again open cmd prompt as a Admin and run this to run the mentioned SFC command.

    Code:
    sfc /scannow

      My System SpecsSystem Spec


  3. Joined : Feb 2016
    Maribor, Slovenia
    Posts : 3,057
    Windows X (various flavours)
       15 Oct 2016 #3

    There are great tutorials by Brink on how to reset windows-update

    Or you can download Windows anniversary ISO from MS and do an inplace-upgrade. This may be even faster


      My System SpecsSystem Spec


  4. Joined : Jun 2015
    Posts : 80
    Win 10 Pro 64bit - Build
       15 Oct 2016 #4

    vgchat said: View Post
    Hi, have you ran DISM yet as per this article?
    How to Repair Corrupted Windows System Files with the SFC and DISM Commands

    Run the DISM Command to Fix SFC Problems

    On Windows 10, 8.1, and 8, the Deployment Image & Servicing Management tool can fix component store corruption that prevents the SFC command from working properly.
    To run this command, open a Command Prompt as administrator. Type the following command and press Enter. DISM will check your Windows component store for corruption and automatically fix any problems it finds.
    vgchat said: View Post
    Code:
    DISM /Online /Cleanup-Image /RestoreHealth

    Allow the command to finish running before closing the Command Prompt window. This may take five to ten minutes. Its normal for the progress bar to stay at 20 percent for a while, so dont worry about that.
    If the DISM command changed anything, restart your computer afterwards. You can now run the SFC command again and it would be able to replace any corrupted files with the correct ones.

    Again open cmd prompt as a Admin and run this to run the mentioned SFC command.

    Code:
    sfc /scannow


    Thanks for the quick reply...ran the C:\Windows\system32>DISM /Online /Cleanup-Image /RestoreHealth with administrtive priviliges but got the attached jpg 'error" Did not continue with
    sfc /scannow

    What do I do now to get DISM /Online /Cleanup-Image /RestoreHealth to run correctly ?

    Thanks...TRinAz

    Attached Thumbnails Attached Thumbnails DISM report.JPG  
      My System SpecsSystem Spec


  5. Joined : Feb 2016
    Maribor, Slovenia
    Posts : 3,057
    Windows X (various flavours)
       15 Oct 2016 #5

    Trinaz, you need an ISO of Windows build (same as running) and point DISM command to it.

    There are a lot of similar threads already on this forums.. follow instructions in this one (post) #2 - or any other

    davidhk posted: (link doesn't work anymore - find it in post above...

    Use the Tech Bench link to download your version of Windows 10
    https://www.microsoft.com/en-us/soft...load/techbench
    Once you have the iso downloaded, right click at the ISO > click Mount > leave it there

    Then open the elevated command prompt and copy and paste this................

    Dism /Online /Cleanup-Image /RestoreHealth /Source:wim:H:\sources\install.wim:1 /limitaccess
    Note : H is the drive where the iso is mounted. Change it if your driver letter is different.

    When it is completed, you should get the report that the operation is successful.
    Now run the sfc /scannow again. It should be ok this time.
      My System SpecsSystem Spec


  6. Joined : Jun 2015
    Posts : 80
    Win 10 Pro 64bit - Build
       15 Oct 2016 #6

    OK...thanks...will work on this later...off to work now...hopefully I'll get this figured out in next day or two following your advice

    TRinAz
      My System SpecsSystem Spec


  7. Joined : Jun 2015
    Posts : 80
    Win 10 Pro 64bit - Build
       17 Oct 2016 #7

    apparently the iso file is no longer at this s link...can you provide a current or different link for the Win 10 Pro 64 bit anniversary iso file to try ?

    thanks...Tim
      My System SpecsSystem Spec


  8. Joined : Feb 2016
    Maribor, Slovenia
    Posts : 3,057
    Windows X (various flavours)
       17 Oct 2016 #8

    trinaz said: View Post
    apparently the iso file is no longer at this s link...can you provide a current or different link for the Win 10 Pro 64 bit anniversary iso file to try ?

    thanks...Tim
    Here are tutorials.. windows-10-iso-download. I would recommend inplace upgrade. Download ISO and instead of DISM, just mount it and run setup. It will bring you to Windows anniversary.
      My System SpecsSystem Spec

  9.    17 Oct 2016 #9

    Hey, AndreTen!
    Love the mount of the ISO to provide the location for DISM. I've often struggled with getting the syntax for the /source attribute right when simply pointing to the ISO itself. This makes it more compact and easier to follow. Thanks!
    --Ed--
      My System SpecsSystem Spec


  10. Joined : Feb 2016
    Maribor, Slovenia
    Posts : 3,057
    Windows X (various flavours)
       17 Oct 2016 #10

    EdTittel said: View Post
    Hey, AndreTen!
    Love the mount of the ISO to provide the location for DISM. I've often struggled with getting the syntax for the /source attribute right when simply pointing to the ISO itself. This makes it more compact and easier to follow. Thanks!
    --Ed--
    It was often advised here by pros, Ed
      My System SpecsSystem Spec


 
Page 1 of 4 123 ... LastLast


Similar Threads
Thread Forum
Windows 10 as of Sept 22nd updates can no longer read xbox 360 usb sti
Windows 10 on my laptop as of Sept 22nd updates can no longer read xbox 360 usb stick. Windows 10 just reads the usb stick as 16gb of unallocated space in computer managment. My windows 10 pre sept 22nd desktop reads the usb stick no problem....
Drivers and Hardware
No longer able to choose options in Windows 10 updates - what happened
As a matter of background info, I have always kept up with the latest windows update. At one time - up until a few weeks ago - I had options within Windows Updates (in Windows 10), which gave me choices on how I wanted to download the updates. ...
Windows Updates and Activation
Win10 share works until updates(2 weeks to a month) and permission end
Searched thru post, lots of near misses but no solution to my issue. Only on windows 10 does this problem exist. I connect office equipment to customers pcs/networks. I use a script to create a hidden/special user that has admin permissions...
Network and Sharing
Stuck are INSTALLING for 2 weeks now - two different W10 Updates !!
I'm stumped - the 2 UPDATES below have never installed in over 2 weeks. They continue to stay at "INSTALLING". There are 8 other updates in the queue now stuck behind these "WAITING TO INSTALL". Why is this happening???? How can I get it kicked...
Windows Updates and Activation
Solved Definition updates for Windows Defender no longer show up on history?
Not sure if it's just me, but for some reason, since the Jan 12 patch Tuesday, I no longer see definition updates for Windows Defender on Windows Update's "View your update history" page. Anyone else noticing this? I, for one, am happy about...
Windows Updates and Activation
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:36.
Find Us
Twitter Facebook Google+



Windows 10 Forums