New
#11
I talk about local account ,not related to IP
I talk about local account ,not related to IP
Conclusion : all methods to change , remove ,add password to local account lead to same results , if you use computer management, or login screen, or account manager, u got same message
if you want to convert Micosoft account to local . then you need to enter password, you got same result :)
Try this to remove policies, which might be causing problems, run CMD as admin and enter:
reg delete "HKCU\Software\Policies\Microsoft\Windows\System" /f
reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\System" /f
reg delete "HKLM\Software\Policies\Microsoft\Windows\System" /f
reg delete "HKLM\Software\Microsoft\Windows\CurrentVersion\Policies\System" /f
Note: It could cause (maybe), that you will not be able to login to your MS account, so use at own risk.
Try to reset all the local security policy settings to default:
- Open an elevated Command Prompt.
- Run this command:
Code:secedit /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb /verbose- Reboot your computer and check if it fixes your problem.
-------------------------------------------
----Configuration engine was initialized successfully.----
----Reading Configuration Template info...
----Configure User Rights...
SeImpersonatePrivilege must be assigned to administrators. This setting is adjusted.
SeImpersonatePrivilege must be assigned to SERVICE. This setting is adjusted.
Configure S-1-5-19.
Configure S-1-5-20.
Configure S-1-5-32-544.
Configure S-1-5-32-551.
Configure S-1-5-32-559.
Configure S-1-5-32-545.
Configure S-1-1-0.
Configure S-1-5-6.
Configure S-1-5-21-2671695912-1002235341-1492644867-501.
Configure S-1-5-32-555.
Configure S-1-5-80-0.
Configure S-1-5-80-3139157870-2983391045-3678747466-658725712-1809340420.
User Rights configuration was completed successfully.
----Configure Group Membership...
Configure Users.
Group Membership configuration was completed successfully.
----Configure 64-bit Registry Keys...
Configuration of Registry Keys was completed successfully.
----Configure 32-bit Registry Keys...
----Configure File Security...
File Security configuration was completed successfully.
----Configure General Service Settings...
Configure sysmonlog.
Error 1060: The specified service does not exist as an installed service.
Error opening sysmonlog.
Configure SamSs.
Configure ntmssvc.
Error 1060: The specified service does not exist as an installed service.
Error opening ntmssvc.
Configure netddedsdm.
Error 1060: The specified service does not exist as an installed service.
Error opening netddedsdm.
Configure netdde.
Error 1060: The specified service does not exist as an installed service.
Error opening netdde.
Configure dmserver.
Error 1060: The specified service does not exist as an installed service.
Error opening dmserver.
Configure clipsrv.
Error 1060: The specified service does not exist as an installed service.
Error opening clipsrv.
Configure Browser.
General Service configuration was completed successfully.
----Configure available attachment engines...
Configuration of attachment engines was completed successfully.
----Configure Security Policy...
Configure password information.
Administrator account is disabled.
Guest account is disabled.
System Access configuration was completed successfully.
LSA anonymous lookup names setting : existing SD = DD;;0x800;;;AN)(A;;0xf1fff;;;BA)(A;;0x20801;;;WD)(A;;0x801;;;AN)(A;;0x1000;;;LS)(A;;0x1000;;;NS)(A;;0 x1000;;;S-1-5-17)(A;;0x801;;;AC).
Configure LSA anonymous lookup setting.
Configure machine\software\microsoft\windows nt\currentversion\setup\recoveryconsole\securitylevel.
Configure machine\software\microsoft\windows nt\currentversion\setup\recoveryconsole\setcommand.
Configure machine\software\microsoft\windows nt\currentversion\winlogon\scremoveoption.
Configure machine\software\microsoft\windows\currentversion\policies\system\dontdisplaylastusername.
Configure machine\software\microsoft\windows\currentversion\policies\system\legalnoticecaption.
Configure machine\software\microsoft\windows\currentversion\policies\system\legalnoticetext.
Configure machine\software\microsoft\windows\currentversion\policies\system\scforceoption.
Configure machine\software\microsoft\windows\currentversion\policies\system\shutdownwithoutlogon.
Configure machine\software\microsoft\windows\currentversion\policies\system\undockwithoutlogon.
Configure machine\software\policies\microsoft\windows\safer\codeidentifiers\authenticodeenabled.
Configure machine\system\currentcontrolset\control\lsa\auditbaseobjects.
Configure machine\system\currentcontrolset\control\lsa\crashonauditfail.
Configure machine\system\currentcontrolset\control\lsa\disabledomaincreds.
Configure machine\system\currentcontrolset\control\lsa\everyoneincludesanonymous.
Configure machine\system\currentcontrolset\control\lsa\fipsalgorithmpolicy\enabled.
Configure machine\system\currentcontrolset\control\lsa\forceguest.
Configure machine\system\currentcontrolset\control\lsa\fullprivilegeauditing.
Configure machine\system\currentcontrolset\control\lsa\nolmhash.
Configure machine\system\currentcontrolset\control\lsa\restrictanonymous.
Configure machine\system\currentcontrolset\control\lsa\restrictanonymoussam.
Configure machine\system\currentcontrolset\control\print\providers\lanman print services\servers\addprinterdrivers.
Configure machine\system\currentcontrolset\control\session manager\kernel\obcaseinsensitive.
Configure machine\system\currentcontrolset\control\session manager\memory management\clearpagefileatshutdown.
Configure machine\system\currentcontrolset\control\session manager\protectionmode.
Configure machine\system\currentcontrolset\services\lanmanserver\parameters\autodisconnect.
Configure machine\system\currentcontrolset\services\lanmanserver\parameters\enableforcedlogoff.
Configure machine\system\currentcontrolset\services\lanmanserver\parameters\enablesecuritysignature.
Configure machine\system\currentcontrolset\services\lanmanserver\parameters\requiresecuritysignature.
Configure machine\system\currentcontrolset\services\lanmanserver\parameters\restrictnullsessaccess.
Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\enableplaintextpassword.
Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\enablesecuritysignature.
Configure machine\system\currentcontrolset\services\lanmanworkstation\parameters\requiresecuritysignature.
Configure machine\system\currentcontrolset\services\ldap\ldapclientintegrity.
Configuration of Registry Values was completed successfully.
Configure log settings.
Audit/Log configuration was completed successfully.
----Configure available attachment engines...
Configuration of attachment engines was completed successfully.
----Un-initialize configuration engine...
problem not solved!!!!!!!!!!!!!
؟؟ how to solve my problem????