Page 47 of 48 FirstFirst ... 3745464748 LastLast

  1. Joined : Apr 2014
    Posts : 3,289
    W10 Pro x64/W7 Ultimate x64 dual boot main - W10 Pro Insider Preview/W7 Pro x64 - remote pc
       2016-08-13 #460

    With FF and other variants opening a new session in a Private window is what will allow you to get the MS page. The tracking protection involves protecting browsing history not just the text files for each site. The idea behind that is to prevent sites from knowing too much about your browsing habits not the particulars about individual sites you visit which is where cookies apply.

    Not one problem navigating all MS sites with the latest Opera release however which is also preferred here far more then Chrome or Flock! Both of those could be identical twins apart from naming. But due to problems like this that come up with one browser or with several as in the case of being FF based while Cyberfox doesn't seem to be effected as the others are I decided to run with several onhand for any of those "just in case" moments.
      My System SpecsSystem Spec


  2. Joined : Aug 2016
    Posts : 14
    Win 10
       2016-08-15 #461

    transplanted99 said: View Post
    ...Only one upgraded computer left the security software intact, while the rest failed - major bummer. Not much from the software developer on any issues with Win 10 - unbelievably.

    This begat a reinstall from scratch, since the Win 10 auth code remains valid with the machine.

    The security software reinstalled on top of that worked for one computer. Now onto the rest...
    UPDATE: All installed correctly. Thanks to the folks here for the help provided.

    I now have an issue with an update being stuck on the "Configuring Update ... 99%" for hours on one computer. Posted that on another more relevant thread for assistance there.
      My System SpecsSystem Spec


  3. Joined : Apr 2014
    Posts : 3,289
    W10 Pro x64/W7 Ultimate x64 dual boot main - W10 Pro Insider Preview/W7 Pro x64 - remote pc
       2016-08-15 #462

    Whenever you run into a frozen 99% typically you will end up needing a hard boot to free the system up if you are not able to bring up the Task manager to end the update process. After a full restart you can make a fresh attempt to see if the update will go on and finish up without freezing on you again.

    If stuck on a solid at a certain percentage during the RS1 update I hit the reset and watch as the upgrade install then has to start from where the initial reboot was started. Had a couple of builds hang like that both on physical and on VM too. First try the TM however to see if you can free it up.
      My System SpecsSystem Spec


  4. Joined : Jun 2015
    Posts : 83
    Win 7 Ultimate
       2016-08-17 #463

    Night Hawk said: View Post
    With FF and other variants opening a new session in a Private window is what will allow you to get the MS page. The tracking protection involves protecting browsing history not just the text files for each site. The idea behind that is to prevent sites from knowing too much about your browsing habits not the particulars about individual sites you visit which is where cookies apply.

    Not one problem navigating all MS sites with the latest Opera release however which is also preferred here far more then Chrome or Flock! Both of those could be identical twins apart from naming. But due to problems like this that come up with one browser or with several as in the case of being FF based while Cyberfox doesn't seem to be effected as the others are I decided to run with several onhand for any of those "just in case" moments.
    Would be interesting see how these Browsers are operate in near future.
      My System SpecsSystem Spec


  5. Joined : Apr 2014
    Posts : 3,289
    W10 Pro x64/W7 Ultimate x64 dual boot main - W10 Pro Insider Preview/W7 Pro x64 - remote pc
       2016-08-17 #464

    Can never tell?! MS may be covertly making some changes were eventually you will only be able to get onto some MS sites by way of Edge? Since Google has recently become an OS competitor with all their stuff including Chrome as well as FF having always been a favorite alternative to IE over the years it doesn't much to mess with a little coding?

    The other factor that seems to prevail however is something new being seen in the browsers themselves preventing arrival at the MS download center. That was something noticed sometime back as far as an FF update for the present FF 47 as well as two out of the three ff variant browsers suddenly running into an MS sign in page regardless of already being signed into an MS account.
      My System SpecsSystem Spec


  6. Joined : Aug 2016
    Posts : 14
    Win 10
       2016-08-18 #465

    Night Hawk said: View Post
    Whenever you run into a frozen 99% typically you will end up needing a hard boot to free the system up if you are not able to bring up the Task manager to end the update process. After a full restart you can make a fresh attempt to see if the update will go on and finish up without freezing on you again.

    If stuck on a solid at a certain percentage during the RS1 update I hit the reset and watch as the upgrade install then has to start from where the initial reboot was started. Had a couple of builds hang like that both on physical and on VM too. First try the TM however to see if you can free it up.
    Thanks, hadn't thought of Task Manager, though the 99% was during the boot up process - would CTRL-ALT-DEL get one to TM dialogue?

    Anyway, did a power down, and after getting it to reboot correctly to Win 10, ran a "Check for Updates" - it shows the update but proceeding with the update looks like it is doing something, though finishing rather quickly, but reboot brings up the very same version after "Check for Updates" again. Haven't checked since last posting, as this was not causing any critical failure in use of the computer.

    My guess is I will have to clear update history manually and let it rescan everything from scratch. Here's my post on this in another thread (don't want to hijack this one, thanks)...
    Long update wasn't the Anniversary Update... what was it? - Windows 10 Forums
      My System SpecsSystem Spec


  7. Joined : Apr 2014
    Posts : 3,289
    W10 Pro x64/W7 Ultimate x64 dual boot main - W10 Pro Insider Preview/W7 Pro x64 - remote pc
       2016-08-18 #466

    Well there is one thing I can here since any number of people may run into similar WU issues and that would be the Windows Update Troubleshooter tool. Every so often the functioning of the WU gets impaired a bit and may need a repair.

    Windows Update Troubleshooter





    Help from Microsoft
    The idea of running the Task Manager or seeing a hard boot is when any update might hang during the download and install. When the RS1 update didn't even show up on the main, the secondary running Insider builds, the 10 laptop bought several months back, and the recent last minute upgrade of another 7 desktop I simply ran the MC Tool with the immediate online update not doing anything, the tool wouldn't reuse an existing flash drive previously used, and I ended up downloading the iso directly followed later by the separate 32bit and 64bit dual edition iso from the MS download page. The MC Tool's downloaded iso was then simply mounted to run the upgrade install.

    For anyone experienced at custom installing Windows and formatting, partitioning drives, etc. I would highly recommend downloading the correct iso to have on hand anyways for later repair if needed as well as getting this particular stubborn for some update to even go on! I also recommend disconnecting all hard drives other then the main OS to prevent an issue known to exist with the 10 installer to see if that will then allow a normal upgrade to update take place.

    The guide here will instruct on how to get the latest iso and then it will be up to you to decide on which method to try out. You may simply have to switch installation method to get results. After all pcs here saw the update installed I then extracted the contents of the MC Tool's iso to rewrite existing 10 media to have the updated version available.
      My System SpecsSystem Spec


  8. Joined : Sep 2016
    Posts : 6
    Windows 10
       2016-09-30 #467

    So when I click on the USB Flash Drive option in the 2nd eay to download the file, the Media Tool tells me that there are no usb drives avaliable when I have the drive pugged in.
      My System SpecsSystem Spec


  9. Joined : Oct 2013
    Posts : 16,584
    64-bit Windows 10 Pro build 14986
       2016-09-30 #468

    An Orange Steel said: View Post
    So when I click on the USB Flash Drive option in the 2nd eay to download the file, the Media Tool tells me that there are no usb drives avaliable when I have the drive pugged in.
    Hello an Orange Steel,

    Check to see if OPTION ONE and the information at the top of the tutorial below may be able help for a USB instead.

    USB Flash Drive - Create to Install Windows 10
      My System SpecsSystem Spec


  10. Joined : Apr 2014
    Posts : 3,289
    W10 Pro x64/W7 Ultimate x64 dual boot main - W10 Pro Insider Preview/W7 Pro x64 - remote pc
       2016-10-01 #469

    USB Flash drive problems can have different causes at times from the findings over the years here. Notoriously the most often seen may simply be the brand of drive while the second leading cause is what the flash drive is being plugged into. The third leading cause missed often enough as well is the simple need to unplug and then replug the flash drive back in for a fresh detection of the drive itself.

    For a system running 24/7 you may have to see a full system restart to refresh the OS which in turn will then be able to freshly detect all drives. As for usb hubs you plug in but lack an ac wall adapter drawing power only from a port the port or hub become suspect unless only certain brands will be seen. Most reliable found for non powered usb hubs are San Disk and Kingston. Others like PNY, HP, Memorex, and other generic labels failed often. On self powered hubs like Cyberport on the other hand most brands will show up automatically.
      My System SpecsSystem Spec


 
Page 47 of 48 FirstFirst ... 3745464748 LastLast


Similar Threads
Tutorial Category
Windows 10 download
Is windows 10 supposed to download on computers that signed up through that notification thing before the 29th? I ask this because since yesterday i have lost 10Gb of hard drive space and i have not download a thing
General Support
Solved Cannot manually download updates from download.microsoft.com
So, I have both windows 7 and windows 10 installed on two computers. (Total of four operating systems) And I need to download User-Mode Driver Framework version 1.11 update for Windows 7, and Windows Server 2008 R2, but when I click 'Click here' and...
Windows Updates and Activation
Unable to download windows 10 ISO
Hi, I am having this problem which drives me crazy for the last three days. Every time I download the technical preview, the sha1 of the downloaded ISO file is not the same as the one they provide at the download page. More than that, when I try to...
Installation and Setup
Windows 7 usb/dvd Download Tool
Thanks for this forum. I am trying to create a bootable dvd in preparation for the test install of Windows 10. I am running Windows 7 pro 64-bit with all the updates. Not sure if the image worked. Here is the window I get when I run the...
Software and Apps
Staged Windows 9 Download Site
Does this article from NeoWin appear to sound legit? It cites that a staged download page was accidentally put online, but hastily removed. If it's correct, it appears that a 32-bit build will be available. Windows Technical Preview weighs in...
Windows 10 News
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 01:52.
Find Us
Twitter Facebook Google+



Windows 10 Forums