Page 3 of 36 FirstFirst 1234513 ... LastLast

  1. Joined : Aug 2015
    Posts : 4
    Windows 10 Pro x64
       2015-08-01 #20

    Hello!
    I followed along and I got a problem at step 4. After I run Dism /Online /Cleanup-Image /ScanHealth the resultit indicates "The component store is repairable". Yet when I run DISM Restore Health, it can't repair and I get error 0x800f081f
      My System SpecsSystem Spec


  2. Joined : Oct 2013
    Posts : 16,489
    64-bit Windows 10 Pro build 14971
       2015-08-01 #21

    Hello desmog, and welcome to Ten Forums.

    If you haven't already, you might see if using step 6 or 7 in OPTION ONE may be able to help.
      My System SpecsSystem Spec


  3. Joined : Aug 2015
    Posts : 4
    Windows 10 Pro x64
       2015-08-01 #22

    I'm done with step six I'm still getting an error occurred
    "Microsoft Windows [Version 10.0.10240]
    (c) 2015 Microsoft Corporation. All rights reserved.

    C:\WINDOWS\system32>Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:C:\$Windows.~BT\Sources\Install.esd:1 /limitaccess

    Deployment Image Servicing and Management tool
    Version: 10.0.10240.16384

    Image Version: 10.0.10240.16384

    [==========================100.0%==========================]

    Error: 0x800f081f

    The source files could not be found.
    Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.

    The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log"
      My System SpecsSystem Spec


  4. Joined : Oct 2013
    Posts : 16,489
    64-bit Windows 10 Pro build 14971
       2015-08-01 #23

    If you're not having any issues, then I wouldn't worry about it. Otherwise, you may need to refresh or reset Windows 10.
      My System SpecsSystem Spec


  5. Joined : Nov 2013
    Land of 10,000 lakes
    Posts : 10,323
    W10 Pro, W10 Home
       2015-08-01 #24

    desmog said: View Post
    I'm done with step six I'm still getting an error occurred
    "Microsoft Windows [Version 10.0.10240]
    (c) 2015 Microsoft Corporation. All rights reserved.

    C:\WINDOWS\system32>Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:C:\$Windows.~BT\Sources\Install.esd:1 /limitaccess

    Deployment Image Servicing and Management tool
    Version: 10.0.10240.16384

    Image Version: 10.0.10240.16384

    [==========================100.0%==========================]

    Error: 0x800f081f

    The source files could not be found.
    Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.

    The DISM log file can be found at C:\WINDOWS\Logs\DISM\dism.log"
    I keep getting Error: 0x800f081f no matter what I try. Even creating an ISO from the ESD folder and doing a clean install doesn't work. I suspect that the upgrade I downloaded was corrupted somehow. Since I am on a limited data plan, I will have to wait until next month to try again, so I restored a W7 image and it is still activated. As they say, "Better luck next time."
      My System SpecsSystem Spec


  6. Joined : Aug 2015
    Posts : 4
    Windows 10 Pro x64
       2015-08-01 #25

    I'm actually having issues with Wi-fi connection, it does not auto connect after restarts
      My System SpecsSystem Spec


  7. Joined : Feb 2015
    Bamberg Germany
    Posts : 13,395
    Microsoft Windows 10 Pro 64-bit 14393 Multiprocessor Free
       2015-08-01 #26

    Thanks for the tut Shawn! It didn't repair what I wanted, but for people using the USB created using the Windows 10 install tool the full code would be Dism /Online /Cleanup-Image /RestoreHealth /Source:E:\Sources\Install.esd Where Source:E was MY USB but the rest is the same. Just open notepad copy & paste the above, change the drive letter copy the new code and paste in CMD prompt. Save the notepad for future use naming it "DismUsbCleanup"
    Click image for larger version. 

Name:	001.png 
Views:	408 
Size:	36.7 KB 
ID:	27520
      My System SpecsSystem Spec


  8. Joined : Oct 2014
    Posts : 27
    Windows 10 preview
       2015-08-01 #27

    I will totally join this chat. The original ISO comes with corrupted files so don't bother using it as source. You will never repair Windows component. I upgraded my 3 computers and all 3 found corrupted files when running sfc -scannow. The only way to repair it is to use

    Dism /Online /Cleanup-Image /RestoreHealth

    It worked on my 3 computers. after that I rebooted then ran sfc -scannow and no more integrity violation. I tried to upgrade my friend's laptop using the same method, and then I ran into that dawn error.

    Error: 0x800f081f

    The source files could not be found.
    Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.


      My System SpecsSystem Spec


  9. Joined : Oct 2014
    Posts : 27
    Windows 10 preview
       2015-08-01 #28

    I'm super pissed. I know it is not probably a big deal, but my curiosity want me to find the culprit behind this shit. Why the dawn source cannot be found? XD That's stupid. And why the official ISO comes with corrupted files at the first place? XD I tried to reset windows update, refresh PC and still that stupid error. I suspected that it may have been Windows firewall if your wifi is labeled public. switch to private. still that stupid error. I challenge anyone here to find the cause and be able to reproduce the problem-solution!
      My System SpecsSystem Spec


  10. Joined : Jul 2015
    Berlin
    Posts : 52
    Windows 10
       2015-08-02 #29

    6. To Use DISM /RestoreHealth /Source:wim Command


    Not sure I fully understand step 6. To use DISM......... and: The install.wim file will be in the Sources folder of a mounted Windows 10 ISO file.

    To do step 6. I have to first download a Windows 10 ISO? (If this is correct I assume it is to have a place to get a non-corrupted/missing file from...or?)

    sfc /scannow = found corrupt files it could not repair.
    cleanup-Image /Scanhealth = said component store is repairable.
    Dism /Online /Cleanup-Image /RestoreHealth = said Error: 0x800f081f The source files could not be found....

    (I noticed that in updates that Security update KB3074683 failed to install today???? the problem??)

    so my next step has to be download a Windows 10 ISO ?

    or is the Windows 10 "Go back to Windows 8.1" a viable option - but only if it is a real clean easy option (= don't lose stuff, have all kinds of problems, driver issues, or whatever problems)??? The only reason I think about doing this is because a) to have a clean re-install of Windows 10 (assuming I can re-install), b) this time to install in German (where I live) and be able to use audio Cortana (now I can't because I installed in English) = but this is only worth it if I can do this WITHOUT loss or even more problems!

    glad of help / clarity on this - and my thanks
      My System SpecsSystem Spec


 
Page 3 of 36 FirstFirst 1234513 ... LastLast


Similar Threads
Tutorial Category
SFC Scannow or DISM/RestoreHealth using Image
Windows 10 user. Having some trouble with my system after coming back from a weekend. Nothing major...just having trouble playing some games that require plugins etc Regardless if it's related, I just wanted to run an SFC/Scannow or...
Performance & Maintenance
How to repair your system files using Dism and Sfc in build 10041
Hello, everyone, I've managed to resolve most of my problems with build 10041 by making SFC work. I've opened a thread on Windows Insider's forums explaining how to do it. Check it out:...
Windows Insider
Windows 10 Crashing on CLASSPNP.SYS in safemode and startup repair.
I've just upgraded Windows 7 64-bit HP OEM to Windows 10 Technical preview 64-bit. Extracted the install while booted within 7, install went smoothly, opted to keep all my files, and once the install was finished it went to boot Windows 10. It hung...
General Support
W10 Disk Image Utility Reports Error After Image Creation.
I installed the 32 bit version of W10 on an old Acer laptop to get back up to speed with developments, and one of the first questions or issues that cropped up is when using W10's disk image utility to make a system image. I deliberately wished to...
General Support
Windows 10 TP Repair and Recovery Features
I'm currently running the 10 TP in a virtual machine. I see that the various boot and repair options can be accessed by <shift> Restart from the desktop, however F8 during boot doesn't appear to work. Can someone who is actually running this on...
Installation and Setup
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 12:53.
Find Us
Twitter Facebook Google+



Windows 10 Forums