Page 2 of 36 FirstFirst 123412 ... LastLast

  1. Joined : Oct 2013
    Posts : 16,555
    64-bit Windows 10 Pro build 14986
       2015-07-18 #10

    In that situation, it may be best to refresh Windows since it wouldn't affect your Windows 7 installation, and activation for a clean install of Windows 10 has been temporarily blocked by Microsoft for testing upgrades until the 29th.

    As usual, you should always back up anything from Windows 7 you don't want to lose just to be extra safe.
      My System SpecsSystem Spec


  2. Joined : Jun 2015
    Posts : 402
    Windows 10 Pro 64bit; Windows 10 TP
       2015-07-18 #11

    Okay, thank you very much Brink!!

    I will shutdown and unplug my Win 7 SSD now, and then I will refresh my 10240 installation. I have nothing to loose because Office 2016 is the only software I have installed. If it will go well, fine. If not I will delete the volumes of this Win 10 SSD, and wait for an official ISO (or reinstall if I won't get bored).

    Thanks again!
      My System SpecsSystem Spec


  3. Joined : Oct 2013
    Posts : 16,555
    64-bit Windows 10 Pro build 14986
       2015-07-18 #12

    Nar, you'll want to leave Windows 7 connected. Otherwise, it may no longer include it in the "Choose an OS" screen at boot.
      My System SpecsSystem Spec


  4. Joined : Jun 2015
    Posts : 402
    Windows 10 Pro 64bit; Windows 10 TP
       2015-07-18 #13

    Brink said: View Post
    Nar, you'll want to leave Windows 7 connected. Otherwise, it may no longer include it in the "Choose an OS" screen at boot.
    Back, after unplugging my Win 7 SSD and clearing CMOS.

    I use F11 to select the boot disk drive so I never have this boot selection screen

    Going for the Refresh now!! I hope the deletion of all system files and previous installations (full Disk Cleanup) won't affect the Refresh...
      My System SpecsSystem Spec


  5. Joined : Oct 2013
    Posts : 16,555
    64-bit Windows 10 Pro build 14986
       2015-07-18 #14

    Joanne said: View Post
    Going for the Refresh now!! I hope the deletion of all system files and previous installations (full Disk Cleanup) won't affect the Refresh...
    That would just do a reset instead of refresh, and basically be like a clean install.

    Reset Windows 10
      My System SpecsSystem Spec


  6. Joined : Jun 2015
    Posts : 402
    Windows 10 Pro 64bit; Windows 10 TP
       2015-07-18 #15

    Well, well, well......

    I'm back after a failed Refresh. lol.
    It started to Refresh, I went in the other room, and after returning I saw a screen with a " " smiley mentioning an error and prompting me to search for the error "Inaccessible boot device"....

    Then it reverted the changes and now I am back to where I started again. So, the conclusion is that after a full Disk Cleanup no Refresh can be performed?

    Anyway.

    Going to clean install 10162 again, right now. Then I will wait for the upgrade, whenever it comes.
      My System SpecsSystem Spec


  7. Joined : Oct 2013
    Posts : 16,555
    64-bit Windows 10 Pro build 14986
       2015-07-18 #16

    Before doing that if you like, refresh should work if the Windows 7 drive was connected if the Windows 7 drive was your boot drive.
      My System SpecsSystem Spec


  8. Joined : Jun 2015
    Posts : 402
    Windows 10 Pro 64bit; Windows 10 TP
       2015-07-18 #17

    Brink said: View Post
    Before doing that if you like, refresh should work if the Windows 7 drive was connected if the Windows 7 drive was your boot drive.
    Well, to be honest I would not like to risk my Windows 7 installation, my main OS I use for everything, for nothing in the world. The ONLY thing that nags me is that I would prefer to wipe this SSD's partitions/volumes via Win 7 Disk Management and NOT via the WIN 10 installer! But I am too bored to clear CMOS again and plug in Win 7 SSD and delete the volume and unplug, clear CMOS blah-blah-blah...................

    So I will leave the drive as it is, even not in SATA position_0, but in SATA_1 as it is now, and I'll just plug in my usb with the ISO, and after 10' my other USB with the drivers, and I'm done.

    Glad that I tried these procedures though. For sure I'll need them since 10 will be my main OS after a couple of days.

    Thank you very much, Brink!

    PS: Dunno if Win 7 drive was my boot drive. All I know is normally I boot in 7 and whenever I wished so, I was pressing F11 and selecting the other disk and booting to 10.
      My System SpecsSystem Spec


  9. Joined : Oct 2013
    Posts : 16,555
    64-bit Windows 10 Pro build 14986
       2015-07-18 #18

    I can understand that. I hope it goes smoothly.
      My System SpecsSystem Spec


  10. Joined : Jul 2015
    Posts : 8
    Windows 7, Windows 8.1 Pro, Win 10
       2015-08-01 #19

    If you have a pc that has a clean result from sfc /scannow and from Dism /Online /Cleanup-Image /RestoreHealth, then I strongly recommend you backup your \windows\winsxs folder to another drive, usb stick, or dvd. For windows 7 - 10.

    Three times for three different pc's (windows 7 Home, windows 8.1Pro and Windows 10 Home) I've had problems where Dism /Online /Cleanup-Image /RestoreHealth failed,
    even failed using the mounted drive image and doing both the following commands.

    Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:Full Path to install.esd file:1 /limitaccess
    or
    Dism /Online /Cleanup-Image /RestoreHealth /Source:wim:Full Path to install.wim file:1 /limitaccess.

    Each time I had a backup of a clean winsxs folder on another drive for that pc, I was able to use Dism /Online /Cleanup-Image /RestoreHealth /Source:drive:\WinSxS /LimitAccess, and for all three machines, the problems were corrected.

    One of the three machines was an upgraded windows 7 to windows 10, I backed up the winsxs after the 10 upgrade and updates were installed and the system booted. In just a day I needed the clean winsxs as the live one became messed up and none of the above commands would work except the one pointing to my backed up winsxs folder.

    I now keep a copy of the winsxs folder for all my computers in different locations just in case.

    All three pc's now run clean for sfc /scannow and Dism /Online /Cleanup-Image /RestoreHealth.
      My System SpecsSystem Spec


 
Page 2 of 36 FirstFirst 123412 ... LastLast


Similar Threads
Tutorial Category
SFC Scannow or DISM/RestoreHealth using Image
Windows 10 user. Having some trouble with my system after coming back from a weekend. Nothing major...just having trouble playing some games that require plugins etc Regardless if it's related, I just wanted to run an SFC/Scannow or...
Performance & Maintenance
How to repair your system files using Dism and Sfc in build 10041
Hello, everyone, I've managed to resolve most of my problems with build 10041 by making SFC work. I've opened a thread on Windows Insider's forums explaining how to do it. Check it out:...
Windows Insider
Windows 10 Crashing on CLASSPNP.SYS in safemode and startup repair.
I've just upgraded Windows 7 64-bit HP OEM to Windows 10 Technical preview 64-bit. Extracted the install while booted within 7, install went smoothly, opted to keep all my files, and once the install was finished it went to boot Windows 10. It hung...
General Support
W10 Disk Image Utility Reports Error After Image Creation.
I installed the 32 bit version of W10 on an old Acer laptop to get back up to speed with developments, and one of the first questions or issues that cropped up is when using W10's disk image utility to make a system image. I deliberately wished to...
General Support
Windows 10 TP Repair and Recovery Features
I'm currently running the 10 TP in a virtual machine. I see that the various boot and repair options can be accessed by <shift> Restart from the desktop, however F8 during boot doesn't appear to work. Can someone who is actually running this on...
Installation and Setup
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:37.
Find Us
Twitter Facebook Google+



Windows 10 Forums