Page 50 of 52 FirstFirst ... 404849505152 LastLast

  1. Join Date : Aug 2016
    Posts : 5
    Windows 10 X64
       2016-08-24 #490

    mrick69 said: View Post
    Sometimes, you need to open the software before you sysprep. It may need to do something with the profile. Then when you sysprep, those changes it made are copied to all future profiles. I asked if you opened the software before you ran sysprep because if you did, I would have suggested that you try again WITHOUT opening the software. It sounds to me that you just installed the software and then ran sysprep. In this case, I am suggesting you try to open the software after installing it before running sysprep.
    Already tryed that, same problem.
    But the Key from Daemon Tools & Fences are System Related to the PC, so when you Sysprep it the System will change and so it doesn't Recognize the software anymore.
    That's why I need a code for it, so I can use both software for the old system if that excist.
    Example: Daemon Tools System settings use Old settings and the rest of the software new code.
      My System SpecsSystem Spec


  2. Join Date : Jul 2016
    Posts : 16
    Windows 10
       2016-08-26 #491

    djtest said: View Post
    But the Key from Daemon Tools & Fences are System Related to the PC, so when you Sysprep it the System will change and so it doesn't Recognize the software anymore.
    Don't enter the key prior to sysprepping. Make it a post-imaging step.
      My System SpecsSystem Spec


  3. Join Date : Aug 2016
    Posts : 5
    Windows 10 X64
       2016-08-26 #492

    mrick69 said: View Post
    Don't enter the key prior to sysprepping. Make it a post-imaging step.
    Do you mean Install the software as Trail without activation it? Or do you mean something else?
    If you do mean something else can you please explain in some more details please.
      My System SpecsSystem Spec


  4. Join Date : Nov 2014
    Posts : 1
    Windows 8.1
       2016-08-28 #493

    Why is my keyboard press of ctrl shift and f3 not passing through to the vm, I cannot get to audit mode, or past the create an account for this pc. Has this ever happened to you in hyper-v VM??
    I have no network card connected, I have tried installing 3 times into this hyper-v vm on windows 10 1607 host machine and installing a 1607 pro version, do i need to do this with enterprise version?>
    I have had problems in the past sysprepping windows 10 but only when using a virtual machine, is there a different keyboard shortcut to send ctrl shift f3 to the vm?
      My System SpecsSystem Spec


  5. Join Date : Jan 2014
    Posts : 927
    Windows 8.1, 10
       2016-08-28 #494

    If you let the machine go past audit mode and setup a new account, do the Ctrl-Shift-F3 keys work?

    Also, when you get to the screen where you'd want audit mode, is there a symbol with 3 quarters of a circle at the bottom left of the screen? If so, that might give accessibility options including, with any luck, an on-screen keyboard.

    The symbol I mean is just visible beside the bottom-left corner of the white box at 5mins 22s into Kari's video here:
      My System SpecsSystem Spec


  6. Join Date : Jul 2016
    Posts : 16
    Windows 10
       2016-08-29 #495

    djtest said: View Post
    Do you mean Install the software as Trail without activation it? Or do you mean something else?
    If you do mean something else can you please explain in some more details please.
    Yes, install the software but do not activate it until the image is restored and ready to be deployed.
      My System SpecsSystem Spec


  7. Join Date : Aug 2016
    Posts : 2
    Windows 7
       2016-08-30 #496

    Question about answerfile.xml


    Dear Kari and admin team ,
    Thanks for preparing such complete and great instruction for customizing windows 10 via sysprep .
    I went through all of instructions step by step however during preparing Answer file I created Auto login user name and password . below is the answer file after creation of image :
    -----------------------------------------------------------
    <unattend><settings pass="specialize"><component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"><AutoLogon><Password><Value>UQBhAHQAQQBkAG0AaQBuAFAAYQBzAHMAdwBvAHIAZAA=</Value><PlainText>false</PlainText></Password><Enabled>true</Enabled><Username>Admin</Username></AutoLogon>
    .
    .
    When I restart the computer seems everythings have been done alright but when "Admin" user pops on after putting password it doesn't let me to login with "user name or password are incorrect" message.
    How should I recover password ? Is there any way or I should do everything from the first ?!
    Cheers,
    Alex
      My System SpecsSystem Spec


  8. Join Date : Jul 2016
    Posts : 16
    Windows 10
       2016-08-31 #497

    Did you also create an "Admin" account in the answer file? Since you are not using "Administrator", you need to create a local user "Admin". You would do this in Microsoft-Windows-Shell-Setup also. FYI, I'm doing both of these in "settings pass=oobeSystem".
      My System SpecsSystem Spec


  9. Join Date : Aug 2016
    Posts : 2
    Windows 7
       2016-09-04 #498

    mrick69 said: View Post
    Did you also create an "Admin" account in the answer file? Since you are not using "Administrator", you need to create a local user "Admin". You would do this in Microsoft-Windows-Shell-Setup also. FYI, I'm doing both of these in "settings pass=oobeSystem".
    Thank you mrick for your reply
      My System SpecsSystem Spec


  10. Join Date : Aug 2016
    Posts : 16
    Windows 10 Enterprise / Windows Storage Server 2012 R2 / Windows Server 2016 / unRAID
       2016-09-07 #499

    djtest said: View Post
    Do you mean Install the software as Trail without activation it? Or do you mean something else?
    If you do mean something else can you please explain in some more details please.
    Though it's not possible with some software, since it will auto-run right after install, it's best not to even open the software you install during Audit Mode - just install it and leave it. You shouldn't be putting tons and tons of software on there, anyways. Most of what you should be doing are customizations, possible group changes, etc. Only the minimal amount of software should be installed.

    The more software you install, the longer the unattended answer.xml will take to install the OS when generally it's much quicker than a regular OEM install (especially if you do it on a VM).

    It's also better to create a custom .wim file instead of using a 3rd party program (and do not get me wrong, I love Macrium and use it myself) or ImageX. It's very easy to create a WinPE boot USB with ImageX + a GUI wrapper if you need it to snapshot the drive. That said, I do usually run a Reflect image backup, too.
      My System SpecsSystem Spec


 
Page 50 of 52 FirstFirst ... 404849505152 LastLast


Similar Threads
Tutorial Category
Default User Profile - Customize in Windows 10
How to Customize Default User Profile for New Accounts in Windows 10 Default User Profile is stored in a hidden folder in main profile folder Users. When a new user is created, either when installing Windows or any time later, Windows uses this...
Tutorials
Customize the Windows 10 Log-On and Log-Off Screen
how Customize the Windows 10 Log-On and Log-Off Screen in Build 10240? i like a black color! :confused:
Customization
Sysprep fails - Windows 10 build 10162
Hello Guys I'm trying to sysprep a Windows 10 Enterprise build 10162 so that i can capture, but i'm getting some errors and hope you guys have some sort of solution. I've tried removing The upgrade key in HKLM system, but that didn't help. ...
Installation and Setup
Sysprep fails fatally Windows 10 10122
I've tried to go into AUDIT mode to change the User profiles over to a different HDD on 10122. I get a fatal sysprep error. All i've used is an answer file with User profiles set to I:\Users Program Data is not moved, copyprofile not set. Only...
Installation and Setup
NCC Group to audit OpenSSL for security holes
Read more: NCC Group to audit OpenSSL for security holes | ZDNet
Windows 10 News
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:51.
Find Us
Twitter Facebook Google+



Windows 10 Forums