Page 26 of 52 FirstFirst ... 16242526272836 ... LastLast

  1. Join Date : Nov 2015
    Posts : 2
    Windows 10
       2015-11-23 #250

    I created my USB boot flash drive using the windows Media Creation Tool, and selecting 64bit version only.

    Windows 10 Pro Build 10240

    I've booted into Audit mode to create my answers file, and have now run into some problems

    1) there is no install.wim file in the sources folder. There is however a boot.wim file.
    2) In the Windows System Image Manager, if I select the boot.wim file it seems to load fine
    3) There is no amd64_Microsoft-Windows-Shell-Setup Component in the Image list

    Click image for larger version. 

Name:	Components List.png 
Views:	102 
Size:	39.6 KB 
ID:	50149

    Any suggestions?
    Last edited by spanner; 2015-11-23 at 14:57.
      My System SpecsSystem Spec


  2. Join Date : Oct 2013
    A Finnish ex-pat in Germany
    Posts : 9,067
    Windows 10 Pro
       2015-11-23 #251

    It has to be the install.wim file, the boot.wim is not the same. You need either a install.wim file to create the catalog file needed, or an already created catalog file.

    You can use this, it's a Windows 10 Pro X64 RTM Build 10240 EN-US catalog file: install_Windows 10 Pro.zip. Notice that you need to unzip it first.

    Kari
      My System SpecsSystem Spec


  3. Join Date : Nov 2015
    Posts : 2
    Windows 10
       2015-11-24 #252

    Kari said: View Post
    It has to be the install.wim file, the boot.wim is not the same. You need either a install.wim file to create the catalog file needed, or an already created catalog file.

    You can use this, it's a Windows 10 Pro X64 RTM Build 10240 EN-US catalog file: install_Windows 10 Pro.zip. Notice that you need to unzip it first.

    Kari
    Thanks Kari - that seemed to help. Wasn't smooth sailing though.

    After Step 6.3 (Execute the Sysprep command), I tried shutting down, except I couldn't access the start menu. I couldn't access anything actually besides task manager. I could get to the run dialog from task manager, but no matter what I tried to run from there, it just did not execute. Not even Shutdown /F. Hitting my laptop's Power button seemed to shut it down gracefully though.

    After the shutdown, I powered it back up expecting to continue with the setup, but was then faced with a flashing blue and black screen with the loading circle starting up for a split second over and over again.

    I restarted the laptop and booted off the usb stick and clicked repair. This kicked off the rest of the installation process successfully.
      My System SpecsSystem Spec


  4. Join Date : Oct 2013
    A Finnish ex-pat in Germany
    Posts : 9,067
    Windows 10 Pro
       2015-11-24 #253

    spanner said: View Post
    After Step 6.3 (Execute the Sysprep command), I tried shutting down, except I couldn't access the start menu. I couldn't access anything actually besides task manager. I could get to the run dialog from task manager, but no matter what I tried to run from there, it just did not execute. Not even Shutdown /F. Hitting my laptop's Power button seemed to shut it down gracefully though.

    After the shutdown, I powered it back up expecting to continue with the setup, but was then faced with a flashing blue and black screen with the loading circle starting up for a split second over and over again.

    I restarted the laptop and booted off the usb stick and clicked repair. This kicked off the rest of the installation process successfully.
    Usually even in the case of Start not working you can right click it or press WIN + X to open the context menu and then select the Shutdown:
    Name:  2015_11_24_09_26_281.png
Views: 977
Size:  59.5 KB

    Anyway, your experience showed about a small mistake I had in the tutorial. I have now changed the Sysprep command switches in Step 6.3, replaced the /quit switch with /shutdown. This automatically shuts down the PC when sysprep is done. I have no idea why I have had the /quit switch there!
      My System SpecsSystem Spec


  5. Join Date : Oct 2015
    Posts : 3
    Windows 10
       2015-11-24 #254

    Start Menu working FINALLY


    So for my setup I create two users and edit them before running Sysprep. they are named Kiosk and Office

    the issue is the built in apps in C:\users\Kiosk\AppData\Local\Packages have a reference that needs to be cleared out, I would assume sysprep should take care of this but it does not.

    so after I setup everything and sysprep is ready to go, I remove everything in the packages folder for both my users.

    then I run sysprep and capture the image.

    after windows installs and I login to the users for the first time, windows recognizes that the built in apps are no longer present and installs them for me...it takes about 3 minutes to finish on my machine, there is no indicator I just watched the Packages folder as it kept adding in the apps.

    afterwards start works, cortana works, and the built in apps work, all my config changes remain and I have a nice vanilla start menu.

    screw you Microsoft

    FINN
      My System SpecsSystem Spec


  6. Join Date : Nov 2015
    Posts : 8
    W10 and others
       2015-11-24 #255

    Hi everyone,

    For those experiencing Start menu and search breaking (sometimes even the notifications center). Besides being an update issue, a cortana bug, a copy_profile parameter incompatibility ...etc, if you had " Registry Reviver " software (as a standalone software or as a part of the PCReviver suite) installed, and you've used it (before, while or after syspreping), I can assure you @100% that the software is whether the exclusive source of your problem, or in the best cases, a part of it.

    Thoroughly tested on Win 10 x64, pro and enterprise (Did no test on 32 bits, the software itself being 64bits compatible). Performing a registry cleaning may or may not break the components in question (I don't know on what it depends), but the registry defragmenter with absolutely no doubt will.

    After defragmenting the registry using the software, two case scenarios happened on my machine :

    1- The computer reboots normally, but after login in, the components are broken ( you may or may not, again, rebuild them by the now famous Get-AppXPackage in powershell, but soon after restarting, they are broke again)

    2- The computer can't even start, it hangs a brief moment at the windows splash screen, then BSOD : NTFS_FILE_SYSTEM (Ntfs.sys).

    Do not use that software, at least for the moment. It seems it's not truly compatible with 10. Alternatives : Auslogics, Glary (The two free ones I tested, there might be others).

    PS :
    Aaron
    August 19, 2015 @ 2:35 am

    Thank you so very much!!! I have Windows 10 and I downloaded a rubbish PC cleaner called PC Reviver. I did a Registry Defrag that made Cortana and the Start Menu inaccessible and could not restore. Entering your script into Windows Powershell as admin made it work. I thought I would never get the Start Menu, Cortana, Battery Icon, Wifi Icon, Sound Icon and Notification Icon working again.


    Aaron
    August 22, 2015 @ 4:57 am

    UPDATE: For me this is a temporary fix and everytime I shutdown I have to re enter the script into Powershell to gain access to Start Menu and Cortana

    Source of this testimony (Wish I could've seen it earlier, like him, I discovered the problem the hard way) : http://techdows.com/2015/06/fix-star...ild-10122.html (Refer to the comments section)

    Bear in mind :
    Registry reviver Version used : 4.3.0.12.
    Drive type is MBR not GPT (if it is relevant in any way to the software developers).

    Goodluck.
      My System SpecsSystem Spec


  7. Join Date : Nov 2015
    Posts : 5
    windows 10 EDU
       2015-11-27 #256

    chrisdk781 said: View Post
    So for my setup I create two users and edit them before running Sysprep. they are named Kiosk and Office

    the issue is the built in apps in C:\users\Kiosk\AppData\Local\Packages have a reference that needs to be cleared out, I would assume sysprep should take care of this but it does not.

    so after I setup everything and sysprep is ready to go, I remove everything in the packages folder for both my users.

    then I run sysprep and capture the image.

    after windows installs and I login to the users for the first time, windows recognizes that the built in apps are no longer present and installs them for me...it takes about 3 minutes to finish on my machine, there is no indicator I just watched the Packages folder as it kept adding in the apps.

    afterwards start works, cortana works, and the built in apps work, all my config changes remain and I have a nice vanilla start menu.

    screw you Microsoft

    FINN
    I use a setup account for the fresh install. Do all updating, and adding of additional software. then sysprep to audit
    cd sysprep
    sysprep /audit /reboot
    I then audit the system, remove the set up account and use my answer file to copy profile and create the local admin account. It also activates window and office when deployed. If you want to set a customized start screen for new user you can use power shell. For example
    Export-StartLayout -Path 'C:\users\All Users\Desktop\customlayout.xml' -verbose
    Import-StartLayout -LayoutPath 'C:\users\All Users\Desktop\customlayout.xml'-MountPath c:\ -verbose
    del 'C:\users\All Users\Desktop\customlayout.xml' -verbose
    Note that this will only customize the start screen for "new" users.
    Also note that after this first Windows 10 upgrade any new profiles added seemed to be created using corrupted data from the default profile. Since windows didn't wipe out the old default profile data, just copied and migrated it as far as I can see I was able to copy files from the old folder to the new one and that seemed to fix most of the issues.
      My System SpecsSystem Spec


  8. Join Date : Jan 2014
    Washington
    Posts : 302
    Windows 10 10586
       2015-11-27 #257

    Cricky dingo...

    I've been having an issue in creating an answer file in Windows SIM where the error reads, "1:44 PM : This application requires version 10.0.10240.16384 of the Windows ADK.
    Install this version to correct the problem
    1:44 PM :
    1:44 PM : Error opening Windows image at C:\Users\amcma\Desktop\install.wim.
    1:44 PM :
    1:44 PM : System.ComponentModel.Win32Exception (0x80004005): An attempt was made to load a program with an incorrect format
    at Microsoft.ComponentStudio.ComponentPlatformInterface.WimFileHandle..ctor(String wimPath)
    at Microsoft.ComponentStudio.ComponentPlatformInterface.WimInfo..ctor(String wimPath)
    at Microsoft.ComponentStudio.ComponentPlatformInterface.Cpi.OpenWim(String wimPath)
    at Microsoft.ComponentStudio.ImagePicker.GetImageInfoFromPath(String path)
    at Microsoft.ComponentStudio.ImagePicker.ValidateImageFileOrFolder(String fileOrFolder)"

    I have build 10586 running on the machine, all required components of Windows ADK installed but it won't open the install.wim file I converted from .esd that was pulled from the official x64 image of 10 build 10586.

    Ugh.
      My System SpecsSystem Spec


  9. Join Date : Nov 2015
    Posts : 5
    windows 10 EDU
       2015-11-27 #258

    Coke Robot said: View Post
    Cricky dingo...

    I've been having an issue in creating an answer file in Windows SIM where the error reads, "1:44 PM : This application requires version 10.0.10240.16384 of the Windows ADK.
    Install this version to correct the problem
    1:44 PM :
    1:44 PM : Error opening Windows image at C:\Users\amcma\Desktop\install.wim.
    1:44 PM :
    1:44 PM : System.ComponentModel.Win32Exception (0x80004005): An attempt was made to load a program with an incorrect format
    at Microsoft.ComponentStudio.ComponentPlatformInterface.WimFileHandle..ctor(String wimPath)
    at Microsoft.ComponentStudio.ComponentPlatformInterface.WimInfo..ctor(String wimPath)
    at Microsoft.ComponentStudio.ComponentPlatformInterface.Cpi.OpenWim(String wimPath)
    at Microsoft.ComponentStudio.ImagePicker.GetImageInfoFromPath(String path)
    at Microsoft.ComponentStudio.ImagePicker.ValidateImageFileOrFolder(String fileOrFolder)"

    I have build 10586 running on the machine, all required components of Windows ADK installed but it won't open the install.wim file I converted from .esd that was pulled from the official x64 image of 10 build 10586.

    Ugh.
    If you ever used another version of ADK on the system you are trying to create your answer file with, it won't work. Even uninstalling the old one and reinstalling the correct version didn't work for me. I just used a fresh VM, installed ADK, and used that to get my answer file from my install.wim. Also I did not need to make a new answer file after reinstalling the November Edition. I downloaded the media creation tool, installed pro and activated with our EDU Serial. I used the same answer file to sysprep the new version. I'm not sure what the install.esd is all about but I couldn't get it to work with WSIM
      My System SpecsSystem Spec


  10. Join Date : Dec 2015
    Posts : 24
    win10
       2015-12-01 #259

    Deleting the packages folder worked for us as well.

    Does anyone know if Microsoft plans to fix this bug? We should not have to delete the folder and wait for them to re-populate once you log into the preconfigured accounts.
    I have posted on Microsoft's forums and have not had any reply from anyone.

    So far during our testing/sysprepping we found 3 pretty major issues.. as most of us here have...

    sysprep is brakes the start menu, search and corina
    unable to create a system image unless you delete restore points
    unable to backup to thumb drive.

    I sure hope windows plans to address these issues.
      My System SpecsSystem Spec


 
Page 26 of 52 FirstFirst ... 16242526272836 ... LastLast


Similar Threads
Tutorial Category
Default User Profile - Customize in Windows 10
How to Customize Default User Profile for New Accounts in Windows 10 Default User Profile is stored in a hidden folder in main profile folder Users. When a new user is created, either when installing Windows or any time later, Windows uses this...
Tutorials
Customize the Windows 10 Log-On and Log-Off Screen
how Customize the Windows 10 Log-On and Log-Off Screen in Build 10240? i like a black color! :confused:
Customization
Sysprep fails - Windows 10 build 10162
Hello Guys I'm trying to sysprep a Windows 10 Enterprise build 10162 so that i can capture, but i'm getting some errors and hope you guys have some sort of solution. I've tried removing The upgrade key in HKLM system, but that didn't help. ...
Installation and Setup
Sysprep fails fatally Windows 10 10122
I've tried to go into AUDIT mode to change the User profiles over to a different HDD on 10122. I get a fatal sysprep error. All i've used is an answer file with User profiles set to I:\Users Program Data is not moved, copyprofile not set. Only...
Installation and Setup
NCC Group to audit OpenSSL for security holes
Read more: NCC Group to audit OpenSSL for security holes | ZDNet
Windows 10 News
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:32.
Find Us
Twitter Facebook Google+



Windows 10 Forums