Page 13 of 73 FirstFirst ... 311121314152363 ... LastLast

  1. Join Date : Oct 2013
    A Finnish ex-pat in Germany
    Posts : 9,047
    Windows 10 Pro
       23 Feb 2015 #120

    cyberrufus said: View Post
    I'm attempting to change the label on the disk and can't do it. I've tried it several different ways with administrative privileges and it still says I lack the necessary authority to do it. Not a big deal but I'm just really puzzled why.
    You are talking about disk which is a bit confusing. If you have burned the ISO to disk, you cannot of course change the name of it. You cannot change a name of a CD or DVD. The same if you have mounted the ISO file as virtual DVD.

    You can open the script (ESDtoISO.cmd) in Notepad and edit it. Browse halfway through the script until you find the below section, then change the WIN10TP part (highlighted) to anything you want to., leave out the bit version (blue) and language (green) if you wish.

    Save the script with extension .cmd and run it again to creat an ISO with any name you want to.
    Code:
    if "%arch%"=="x86" set arch=X86
    if "%arch%"=="x64" set arch=X64
    set DVDLABEL=W10TP_%arch%_%langid%
    if "%editionid%"=="CoreSingleLanguage" set DVDLABEL=W10TP_%arch%_%langid%
    if "%editionid%"=="ProfessionalWMC" set DVDLABEL=W10TP_%arch%_%langid%
    if "%editionid%"=="CoreCountrySpecific" set DVDLABEL=W10TP_%arch%_%langid%
    if "%editionid%"=="Core" set DVDLABEL=W10TP_%arch%_%langid%
    if "%editionid%"=="CoreN" set DVDLABEL=W10TP_%arch%_%langid%
    if "%editionid%"=="Professional" set DVDLABEL=W10TP_%arch%_%langid%
    if "%editionid%"=="ProfessionalN" set DVDLABEL=W10TP_%arch%_%langid%
    Kari
      My System SpecsSystem Spec


  2. Join Date : Oct 2014
    Posts : 323
    Windows 10x64 14965
       23 Feb 2015 #121

    I caught that in the script after the .iso file was created. I was unable to change the label on the created .iso and just wondered why. I burned it to a USB and created the proper label there but I was just curious why it kept saying I lacked proper authorization (attempted with administrative privileges).

    Not a big deal at all just a bit puzzling and thought you might have the answer.
      My System SpecsSystem Spec


  3. Join Date : Oct 2013
    A Finnish ex-pat in Germany
    Posts : 9,047
    Windows 10 Pro
       23 Feb 2015 #122

    cyberrufus said: View Post
    I caught that in the script after the .iso file was created. I was unable to change the label on the created .iso and just wondered why. I burned it to a USB and created the proper label there but I was just curious why it kept saying I lacked proper authorization (attempted with administrative privileges).

    Not a big deal at all just a bit puzzling and thought you might have the answer.
    I tried to reproduce your issue, can't do that. Works like the charm for me, I can change the name of the ISO file as I expected, totally normally.

    Selecting rename and typing the new name:
    Click image for larger version. 

Name:	2015-02-23_19h46_26.png 
Views:	63 
Size:	43.1 KB 
ID:	13132
    The name will be changed as soon as I hit Enter, without any errors or messages about missing rights:
    Click image for larger version. 

Name:	2015-02-23_19h47_18.png 
Views:	146 
Size:	43.2 KB 
ID:	13133
    Of course if the ISO is mounted as a virtual DVD, which in Windows 8 and later can be done simply by double clicking it, it acts as any DVD and do not allow the name change:
    Click image for larger version. 

Name:	2015-02-23_19h45_20.png 
Views:	202 
Size:	50.7 KB 
ID:	13131
    Also, and again of course, if you try to change the name of the ISO when it is stored in system protected areas (drive C: root, Program Files and Windows folders and so on), you have to provide built-in administrator credentials in order to rename. Do this simply by clicking Continue:
    Name:  2015-02-23_20h21_21.png
Views: 710
Size:  20.5 KB
    Kari
    Last edited by Kari; 23 Feb 2015 at 14:35.
      My System SpecsSystem Spec


  4. Join Date : Oct 2014
    Posts : 323
    Windows 10x64 14965
       23 Feb 2015 #123

    I can change the name of the file as well; it's the label I can't change. Not really an issue; I'll just tweak your script if I need to make the conversion again.
      My System SpecsSystem Spec


  5. Join Date : Oct 2013
    A Finnish ex-pat in Germany
    Posts : 9,047
    Windows 10 Pro
       18 Mar 2015 #124

    Just a bump:

      My System SpecsSystem Spec


  6. Join Date : Dec 2013
    England
    Posts : 815
    Windows 8.1 Windows 10 IP 14971 Windows 10 14393.447
       19 Mar 2015 #125

    Thanks Kari, I'm going to try this for the new update
      My System SpecsSystem Spec

  7.    19 Mar 2015 #126

    Hi Kari

    The ISO works a treat - thanks for the tutorial --glad it wasn't written in Finnish !!!!

    Cheers
    jimbo
      My System SpecsSystem Spec


  8. Join Date : Oct 2013
    Penns Forrest
    Posts : 3,506
    Win_8.1-Pro, Win_10.1607-Pro, Mint_17.3
       19 Mar 2015 #127

    Not having any luck with 10041.

    ESDtoISO fails both in Win10 and Win8 - source is corrupt or invalid, followed by DISM parameter error.
    I have two downloaded update folders - the first failed to update, a reboot did not offer the install, only the download, so I pulled another one down.

    10041.0.150313-1821.fbl_impressive_CLIENTPRO_RET_x64fre_en-us.esd
    2,425,924 bytes - seems small

    I'm not that worried about it, I'll try updating the VHD in a VM and / or running the ESDtoISO commands by hand just to see what's going on.

    I also tried the v4 version - unchanged with all options. Also failed - both esd files and on both Win8 and Win10.
      My System SpecsSystem Spec

  9.    19 Mar 2015 #128

    Hi Peeps

    Note for Windows build 10041 FROM 9926 you need to do the following

    1) In the updates - just Download the new build DO NOT INSTALL - exit the dialog when you see the box Install Now.
    2) Install.esd file is in C:\$Windows~BT\sources
    3) easy way to find it is search the C drive in Windows explorer with .ESD My file is around 2.31GB - simply then copy the file to where you can process it with the utility.

    The .WIM file is in the recovery folder now - not the.ESD file.

    Note - your PC might prompt you for a restart to install the update you've downloaded -- set it for say 8 hrs so you won't be bothered with the update for a while.

    The first thing the ESD utility does is back up the original file and then it gets to work.

    Then it appies image, then exporting image to a new boot.wim file

    I copied all mine to a separate HDD before I started.

    Cheers
    jimbo
      My System SpecsSystem Spec


  10. Join Date : Oct 2014
    Posts : 323
    Windows 10x64 14965
       19 Mar 2015 #129

    Slartybart said: View Post
    Not having any luck with 10041.
    Same here. Hash on the .esd file is correct but getting error on attempt to convert.
      My System SpecsSystem Spec


 
Page 13 of 73 FirstFirst ... 311121314152363 ... LastLast


Similar Threads
Tutorial Category
Bootable File Manager?
Hello, is there any bootable file manager out there because I want to do the following things before installing Windows. 1. Format my C:\ drive with Windows 7.1 2. Move contents from my F:\ drive to C:\ 3. Install Windows 10 of F:\ This is...
General Support
System Information File - Create in Windows 10
How to Create a System Information File in Windows 10 MSINFO contains in depth pertinent information about your system and is often used by Seven Forums members when helping users solve issues, especially during debugging BSOD crash...
Tutorials
Solved An Alternative to Create Bootable ISO from Windows 10 install.esd File
Here's an alternative in addition to Kari's Tutorial: ESD to ISO - Create Bootable ISO from Windows 10 ESD File - Windows 10 Forums https://www.youtube.com/watch?v=lJ8SCzhbycA NOTE: It is better to create an ISO contaning install.wim so if you...
Installation and Setup
Solved USB Download Tool won't create bootable USB using 9926 .ISO
I just wondered if anyone had had any issues creating a bootable USB using the Download Tool with the 9926 .iso? I've tried multiple times now but it just gets stuck at 94% and I end up having to close the program down via Task Manager. Someone I...
Installation and Setup
New - Rufus v2.0.639 - Create bootable USB drives
Rufus - Create bootable USB drives the easy way
Software and Apps
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 01:46.
Find Us
Twitter Facebook Google+



Windows 10 Forums