Page 6 of 8 FirstFirst ... 45678 LastLast

  1. Joined : Oct 2015
    Posts : 12
    Windows 10
       2016-08-28 #50

    Umut said: View Post
    Its a 3 year old pc and i never searched about IDE & AHCI until today. Because my pc was working fine with Windows 7 until installing Windows 10 last month. After that, ONLY when i open 8-9 browser tabs sometimes SSD usage increases to %100 and a few second later everything freezes around a minute or so.
    Hi Umut

    Your freezing issues are almost surely caused by the Anniversary Update of Windows 10.

    Check out this thread on reddit:
    Windows 10 fully freezes after anniversary update : Windows10

    The fix that worked for me was the following:
    DaEistee comments on Windows 10 fully freezes after anniversary update
      My System SpecsSystem Spec


  2. Joined : Oct 2016
    New Zealand
    Posts : 1
    Windows 10 Pro
       2016-10-08 #51

    First post here. First thanks to all for giving valuable tips.
    When I had my Apple Mac mini's and installed Windows 8 and I wanted to change from IDE to AHCI I simply booted in Windows, changed in msconfig.exe to safe boot - minimal, rebooted and changed back again to normal boot. Recently I moved away from Mac mini's to an ASUS VC65R and need to change from AHCI to RAID and same trick worked there too.

    On another note - some people have mentioned that they like to create/delete folders on the Start Menu. I have Classic Start menu installed (but am not running it...) and when I want to make folders or move stuff around I start the Classic menu and create / delete folders in there and it gets propagated to the Metro Start Menu.
      My System SpecsSystem Spec


  3. Joined : Oct 2016
    Posts : 11
    64 bit windows 10 pro
       2016-10-09 #52

    I attempted this today, unsuccesfully I'm afraid. I have a Samsung 850EVO SSD.
    As I went through the registry changes I found that at step5 value was 0, at step 7/8- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorAV, there was no option for StartOverride. I went back to iaStorV and found the StartOverride option there which I changed fro 3 to 0. at step 11 value was 0, step 15 value was 0.
    I then closed regedit and booted to BIOS, changed to AHCI, saved & exited to restart.
    Instead of restarting, I got this error message "INACCESSIBLE_BOOT_DEVICE"
    I went back to BIOS changed back to IDE, same message.
    Finally Windows "repaired the problem" and the computer restarted normally.
    I went back to regedit and found the iaStorV\startoverride was changed back to 3.
    Any idea what went wrong and how I can make the change?
      My System SpecsSystem Spec


  4. Joined : Oct 2013
    Posts : 16,514
    64-bit Windows 10 Pro build 14971
       2016-10-09 #53

    Hello John, and welcome to Ten Forums.

    If the StartOverride key is not there at step 6, it'll need to be added.
      My System SpecsSystem Spec


  5. Joined : Oct 2016
    Posts : 11
    64 bit windows 10 pro
       2016-10-09 #54

    Brink said: View Post
    Hello John, and welcome to Ten Forums.

    If the StartOverride key is not there at step 6, it'll need to be added.
    Not being well versed in registry editing, how does it get added?

    Thanks
      My System SpecsSystem Spec


  6. Joined : Oct 2016
    Posts : 11
    64 bit windows 10 pro
       2016-10-09 #55

    Brink said: View Post
    Hello John, and welcome to Ten Forums.

    If the StartOverride key is not there at step 6, it'll need to be added.
    One more question. Does the StartOveride key in iaStoreV need to be changed to 0 also?
      My System SpecsSystem Spec


  7. Joined : Oct 2016
    Posts : 11
    64 bit windows 10 pro
       2016-10-09 #56

    Brink said: View Post
    Hello John, and welcome to Ten Forums.

    If the StartOverride key is not there at step 6, it'll need to be added.
    Is there more than one way to skinthis cat? I also came across this post of the forum which seems simpler...good method?

    One more question. Does the StartOveride key in iaStoreV need to be changed to 0 also?
      My System SpecsSystem Spec


  8. Joined : Oct 2013
    Posts : 16,514
    64-bit Windows 10 Pro build 14971
       2016-10-09 #57

    Before adding the key, please post a screenshot showing the location at step 6 to verify first.

    Screenshots and Files - Upload and Post in Ten Forums

    There are a few other ways to do this, but I found the method in the tutorial here to be the easiest and more reliable method.
      My System SpecsSystem Spec


  9. Joined : Jun 2016
    Posts : 1,383
    Win10 1607
       2016-10-09 #58

    farmer john said: View Post
    Is there more than one way to skinthis cat? I also came across this post of the forum which seems simpler...good method?

    One more question. Does the StartOveride key in iaStoreV need to be changed to 0 also?
    If you mean the Safe Mode Method , then yes for many with Win 8 or win10 it works IDE to ACHI only though....

    Attn. SSD owners - Enabling AHCI mode AFTER Windows 10 installation.


    AHCI to RAID or vica versa this tutorial's method works I can attest to.

    KB
    Last edited by Kbird; 2016-10-10 at 11:47.
      My System SpecsSystem Spec


  10. Joined : Oct 2016
    Posts : 11
    64 bit windows 10 pro
       2016-10-10 #59

    Click image for larger version. 

Name:	registryStorage.JPG 
Views:	21 
Size:	92.4 KB 
ID:	105252 here's the screenshot of the registry window
      My System SpecsSystem Spec


 
Page 6 of 8 FirstFirst ... 45678 LastLast


Similar Threads
Tutorial Category
Solved Attn. SSD owners - Enabling AHCI mode AFTER Windows 10 installation.
Hello everybody. What started out as a request for guidance ended up with me solving my own problem. Thought I may as well pass on my findings anyway just in case it helps somebody else in the same situation. So over the weekend, through a series...
Drivers and Hardware
Windows Update Automatic Updates - Enable or Disable in Windows 10
How to Enable or Disable Automatic Updates for Windows Update in Windows 10 Windows 10 will automatically check for new Windows Updates at the time you have set in automatic maintenance. Windows 10 will automatically download and install...
Tutorials
Is Windows 10 Standard AHCI Driver Sufficient?
I have an I5 Ivy-Bridge (B75 chipset) system. Windows 10 is up and running (fresh install) and I've been able to load all but the correct SATA drivers - still using the "Standard" AHCI SATA driver that windows installed. Asus hasn't released a...
Drivers and Hardware
Install AHCI Driver after Win 10 installation
Hi All. I would appreciate some help on this one. I found a spare 160GB SATA Drive on which I have decided to install a trial of Win 10 to explore it further for now. The only way that I could get this HD to be seen in the BIOS would be to...
Drivers and Hardware
AHCI still not fixed???
has anyone found any information about ms fixing ahci in win 10? i just can't believe after so many months that they STILL have not fixed this. any new information is appreciated. thanks!
General Support
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:15.
Find Us
Twitter Facebook Google+



Windows 10 Forums