Page 76 of 77 FirstFirst ... 266674757677 LastLast

  1. Join Date : Jun 2015
    Posts : 1,583
    Windows 3.1 to Windows 10
       08 Oct 2016 #751

    Yes, there is a way to setup an admin account and yes there are over 1000 different Programs that can be applied to WinPESE..
    You should check out theoven.org website to learn how to create (develop) your own version of WinPESE with the programs you desire..

    Be warned, they are not very friendly to new users asking a lot of questions.. As it is a development forum and the users are more advanced then the basic forum user...

    http://theoven.org/index.php?topic=1666.0

    Click image for larger version. 

Name:	Capture_021.png 
Views:	5 
Size:	48.3 KB 
ID:	104949

    Due to it being summer and the issues I had with my dad, I have not been very active with PE for a while.. Took a little time off from Testing and Development, but pretty sure when winter rolls through and I come inside, I'll be very active within the forum again..
    Last edited by Kyhi; 08 Oct 2016 at 07:28.
      My System SpecsSystem Spec


  2. Join Date : Oct 2016
    Posts : 1
    Windows 10 Professional x64
       11 Oct 2016 #752

    Hi there. I've been browsing this forum thread for a bit now, and I am loving the WinPESE disk. I have it loaded on a flash drive and have been using it to scan infected machines with great success. I am running into an issue however. I've been trying to update the boot-wim to add a few programs I find personally useful, but I have been unable to successfully add anything. I've followed the steps Kyhi has outlined, i loaded the boot-wim in the correct sub-folder in the Modify-WinPESE folder. I then ran the ModifyWinPESE.cmd with administrator privilages, and chose to modify WinPESE x86 Boot-wim (I am using an x86 ISO, no miss-matches). I moved my updated MBAM folder from my host system to the temp Mounted-Wim folder, as well as added a couple portable programs I find useful into the Program Files folder. I then went back to the cmd prompt and pressed a key to unmount and finalize the boot-wim. I moved the boot-wim back onto my flash drive, booted it up, and low and behold none of the programs were updated/added like I had done in the temp folder. I tried creating a new ISO using the ModifyWinPESE.cmd as well, which also didn't work. I know I'm doing something wrong on my end, I just can't figure it out. Anyways, if anybody would like to take the time to help me out, that would be much appreciated.

    Kyhi, I want to thank you very much for the time you've taken to create an amazing rescue disk, which even though I'm having trouble tweaking, I still get much use out of.
      My System SpecsSystem Spec


  3. Join Date : Jun 2015
    Posts : 1,583
    Windows 3.1 to Windows 10
       11 Oct 2016 #753

    Run MBAM from within the mounted wims program folder. That should update the PE program files..
    The virus definitions are located in the user appdata folder.. although I prefer to let MBAM auto update before scan
      My System SpecsSystem Spec


  4. Join Date : Oct 2016
    Posts : 2
    Windows 10
       12 Oct 2016 #754

    Thanks. should I format the USB to FAT32 before burning iso to it?
      My System SpecsSystem Spec


  5. Join Date : Dec 2015
    Posts : 2,348
    Windows10
       12 Oct 2016 #755

    ffansszi said: View Post
    Thanks. should I format the USB to FAT32 before burning iso to it?
    Yes
      My System SpecsSystem Spec


  6. Join Date : Aug 2015
    Maine
    Posts : 19,706
    Windows10Pro 64Bit on 2 DeskTop Computers
       13 Oct 2016 #756

    @Kyhi
    Seem to have a problem with your Windows 10 Recovery Tool, Win10586PESE_x64 ISO v160707 Kyhi. It does not connect to my internet. Wired connection, says it missing msdt.exe in system32 ???? Then it only wanted to use a wireless connection, which I always have off on my router. So I turned that option on in my router, and finally it did connect, after entering Name and Password.
    I've NEVER had to use a wireless connection before Kyhi. Also tried your older version, same thing. Any idea's on this ??
      My System SpecsSystem Spec


  7. Join Date : Oct 2014
    Arnold, MD
    Posts : 16,342
    Triple Boot 10 Pro & 10 Insider Pro & 8.1 Pro
       13 Oct 2016 #757

    OldMike65 said: View Post
    @Kyhi
    Seem to have a problem with your Windows 10 Recovery Tool, Win10586PESE_x64 ISO v160707 Kyhi. It does not connect to my internet. Wired connection, says it missing msdt.exe in system32 ???? Then it only wanted to use a wireless connection, which I always have off on my router. So I turned that option on in my router, and finally it did connect, after entering Name and Password.
    I've NEVER had to use a wireless connection before Kyhi. Also tried your older version, same thing. Any idea's on this ??
    Mikey! Mystery solved with the Kyhi internet. Just a quick manual step. Thru the Start Menu/Control Panel, wiggle yourself to Device Manager. Click Show Hidden Devices in View. You'll see a whole bunch of devices with the yellow triangle, Lan is one of them. Right click and Update Driver. It will tell you drivers need to be re-installed. Make it happy! Give it a few seconds and the tray icon will go to yellow, then clear-up. I tested by firing up FF, and it connected fine!

    Click image for larger version. 

Name:	20161013_084458.jpg 
Views:	6 
Size:	982.1 KB 
ID:	105770
      My System SpecsSystem Spec


  8. Join Date : Jun 2015
    Posts : 1,583
    Windows 3.1 to Windows 10
       13 Oct 2016 #758

    Thanks TomCat
      My System SpecsSystem Spec


  9. Join Date : Aug 2015
    Maine
    Posts : 19,706
    Windows10Pro 64Bit on 2 DeskTop Computers
       13 Oct 2016 #759

    f14tomcat said: View Post
    Mikey! Mystery solved with the Kyhi internet. Just a quick manual step. Thru the Start Menu/Control Panel, wiggle yourself to Device Manager. Click Show Hidden Devices in View. You'll see a whole bunch of devices with the yellow triangle, Lan is one of them. Right click and Update Driver. It will tell you drivers need to be re-installed. Make it happy! Give it a few seconds and the tray icon will go to yellow, then clear-up. I tested by firing up FF, and it connected fine!

    Click image for larger version. 

Name:	20161013_084458.jpg 
Views:	6 
Size:	982.1 KB 
ID:	105770
    Like I said, it does work on WiFI but never had to configure the network settings before, on past Recovery Tool's it would automatically see my network fine ....now it see's NO network at all, without making changes.
      My System SpecsSystem Spec


  10. Join Date : Oct 2014
    Arnold, MD
    Posts : 16,342
    Triple Boot 10 Pro & 10 Insider Pro & 8.1 Pro
       13 Oct 2016 #760

    There is a method using what Kyhi already has. @simrick pointed out to me that Kyhi has PENetwork built in. It is not a shortcut on the Desktop, but under the Classic Shell Start Menu - All Programs, under Network.

    Click image for larger version. 

Name:	20161013_094753.jpg 
Views:	8 
Size:	1.36 MB 
ID:	105777

    This may be preferable to the Device Manager method because it "sniffs" around and finds the Lan hardware you have and does the appropriate setup. Pretty quick.... Tray icon will change to yellow, then clear up. And you're all set to go!
      My System SpecsSystem Spec


 
Page 76 of 77 FirstFirst ... 266674757677 LastLast


Similar Threads
Thread Forum
Create Rescue Disk fails during disk creation
Have a new Double Power 8.1 Tablet that I've upgraded to Win 10. Now I've got it set up just right, I'm attempting to create a Rescue Disk. Purchased a 16gb micro-usb drive which is successfully recognized. Ran 'Create Rescue Disk' from Windows...
Performance & Maintenance
Solved How to make active@boot disk bootable on uefi/gpt?
Hey Guys Does anyone know how this software can be configured to boot from usb on uefi/gpt. I formatted usb using rufus on the relevant mode then dragged over the contents of another usb where it does work on bios/mbr set up. But when booting...
Installation and Setup
Solved Win 10 Rescue disk
I have a new laptop with win 7 pro installed. Once Win 10 is installed in July how will I be able to create a system restore disk?
Installation and Setup
Solved MiniTool Power Data Recovery to the rescue!!!
Just sharing this. I made another boo-boo today and deleted 500GB worth of media files (just movies and music). Don't ask me how because that's something nobody wants to do. :) I don't keep a backup of these files. For me these are disposable...
Software and Apps
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 17:19.
Find Us
Twitter Facebook Google+



Windows 10 Forums