nope - couldnt see anything wrong with the old MB.
I have surge protection in the power sockets to the PC. My son thinks it was a PSU problem and hence we swapped that too.
Type: Posts; User: Jules59
nope - couldnt see anything wrong with the old MB.
I have surge protection in the power sockets to the PC. My son thinks it was a PSU problem and hence we swapped that too.
Just to close this thread from my end.
Intel were great - my CPU was bust and they got a brand new CPU to me within days. The SSD and HDD were also kaput. So when the MB died, so did the CPU, SDD...
Latest update.
Tried a new SSD - no better - exaclty the same issues.
Contacted Aria from whom I bought the i5 - they dont do RMA for processor - have to go direct to Intel.
Contacted Intel -...
I wont have access to another PC till the weekend - should be able to swap the storage devices and CPU
To summarise:
All POST LEDs (CPU, RAM, VGA, HDD) function normally - no fault indicated.
The XMP and TPU switches are set to disable.
BIOS overclocking is set to manual and left at normal.
CSM is...
Thanks again.
But why should 2 different storage media fail simultaneously? seems very odd to me.
I got 4 passes over 8 hours using Memtest in default mode.
I also tried the F2 "multithreading...
I did this before starting memtest.
Im still unable to install Win 10 via USB ( tried 2 different USB stick in both USB 2 and 3 slots) - each time boots up - get the twirly dots , then a flash of...
Ken
How long should memtest take? Its running now and its taken over 2 hours for just 2 passess. No errors though (yet).
Ken - thanks for your help.
All those jobs are for tomorrow now - my head has had enough of PCs for one night :sleepy:
Will get back to you later.
Sorry to highjack this thread but my probelm similar to that of the OP.
Ive replaced a faulty MB with an identical one under warranty, but Im have been unable to do a clean install of win10 onto...
Thanks for the reply.
Im at a situation where boot up stops before there is no signal to the monitor and so it stays in standby mode awaiting an anologue or digital signal.
Im interested to know ...
Im not getting to the point where the monitor comes to life during the early boot up it seems, not even the boot screen with the motherboard logo appears.
Monitor is working though, tested it using...
Recently rebuilt my system with new:
ASUS Z170-A motherboard
i5 6600-K
16Mb Ram
and 1 year old (previously faultess) graphics card MSI GeForce GTX 970
and 850W PSU from my old system.
Has...
Thanks I'll try that first and let you know
I upgraded my Gigabyte Z77-D3H rev1.0 motherboard based PC to Win10 without any problem and it ran for months very well.
Recently I installed a new graphics card MSI NVIDIA GTX970 and since then...