Windows 10 - automatic repair after memtest session - hardware faulty


  1. Posts : 246
    Windows 10 Pro
       #1

    Windows 10 - automatic repair after memtest session - hardware faulty


    Hello.
    Eh getting weird problem with Windows 10 Pro.

    So few days ago when i ran memtest few hours without error, but after finished test i reboot pc and Automatiic repair started before windows. Is this something with memory ? Memory trigger that error? Or it is software issue? Coincidence ?

    When starting Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc.
    Interesting is that if I restart Windows (after procedure mentioned earlier) it will boot normally. This startup problem occurs only when starting system again after shutdown or restarted pc from windows.So i need 2 boots to boot properly to windows.
    My disk is Samsung Evo 250 GB SSD. I run HD TUNE but no errors and CrystalDiskInfo Smart is fine 100% GOOD. Rams are 2x8gb DDR3 Kingston Hyperx 1600mhhz.

    Memtest86 not showing errors.




    So its a hardware related or not? What you think about it ? Thx for answer.
      My Computer


  2. Posts : 14,901
    Windows 10 Pro
       #2

    That error could raise due to various reasons of causes like corruption in the registry, or file system or something.

    Is the firmware of your SSD updated?

    Could you show some screenshots of HD Tune?



    Diagnostics Test

     HDD TEST


    Run SeaTools to check the integrity of your HDD. SeaTools for DOS and Windows - How to Use - Windows 7 Help Forums
    Run following tests

    1. Short Drive Self Test
    2. Short generic
    3. Long generic

    If the short generic fails, no need for the long generic.
    Note   Note
    Do not run SeaTools on an SSD as the results will be invalid.


    Run chkdsk
    Disk Check - Windows 7 Help Forums

    Run HDTune to

    • scan for errors, no quick scan but full scan
    • check the health,
    • benchmark.

    It may take some time, but please take the time you need to perform it properly.
    Let me know what the results are
    • of the error scan,
    • make a screenshot of the health of every hard drive and post the screenshots,
    • post screenshots with the benchmark of the
      • transfer rate,
      • access time,
      • burst rate,
      • cpu usage.

    Please fill in your system specs
    Please follow this tutorial and download the tool. The tool will give you detailed information about your system specs, please fill in your system specs more completely.
    How to fill in your system specs:

      My Computers


  3. Posts : 246
    Windows 10 Pro
    Thread Starter
       #3

    So i run HDDTUNE and no errors. Smart is fine according to Crystal Disk Info.
      My Computer


  4. Posts : 14,901
    Windows 10 Pro
       #4

    Please post what I asked for, I would like to see some more details of a few things.
      My Computers


  5. Posts : 246
    Windows 10 Pro
    Thread Starter
       #5

    I made the same experiment on my laptop with fresh installed WIndows 10. I change to boot from USB . Then again to BOOT from HDD and boom. Automatic repair during first boot on windows !! :) So this is not hardware issue on my pc. Its something with bios\windows10.Thx topic can be closed.Hardware is fine.
      My Computer


  6. Posts : 14,901
    Windows 10 Pro
       #6

    Threads won't be closed unless for a specific reason, you can however mark this thread as solved :)
      My Computers


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 07:47.
Find Us




Windows 10 Forums