Page 4 of 29 FirstFirst ... 2345614 ... LastLast

  1. Join Date : Aug 2015
    Posts : 82
    Windows 10
       16 Nov 2015 #31

    Sure. Winver shows it's OS Build 10586.3 and VER in the CMD window shows 10.0.10586. I don't know how to copy my update history, but on 11-13 & 15-15 an Intel driver installed for Wireless BT as well as 50 or so Office updates which included updates to Social Connector, Service Pack 2, Security updates as well as general office updates.

    Hope this helps.
      My System SpecsSystem Spec


  2. Join Date : Nov 2015
    Posts : 13
    Windows 10 Pro 64bit
       16 Nov 2015 #32

    Click image for larger version. 

Name:	PejXthv.png 
Views:	10 
Size:	132.3 KB 
ID:	48553

    Click image for larger version. 

Name:	iF5BPA7.png 
Views:	6 
Size:	105.9 KB 
ID:	48554

    I hope MS really aware of it... Looks like issue since build 105xx
      My System SpecsSystem Spec


  3. Join Date : Aug 2015
    Posts : 13
    Win10
       16 Nov 2015 #33

    No updates showing for me


    I refreshed the updates but nothing new shows.

    Keep the suggestions and info coming. I will try anything reasonable.
      My System SpecsSystem Spec


  4. Join Date : Oct 2015
    Posts : 7
    Win 10 64
       16 Nov 2015 #34

    I totally understand. I have never had this issue before myself. It sounds like yours is a bit worse than what I experienced, but here's my process when working on a network issue. Maybe you've performed these steps, but I'm adding them just in case you'd like them.

    1 - collect information from each PC and device and write it down, workgroup/domain name, ip addresses, subnets, gateway and dns servers, if anything is on dhcp, who is providing and at what IP address (multiple routers sometimes end up providing overlapping ip's), what protocols are installed on each pc's nic, and is the PC on a public, private, or work network, is the (Windows) firewall enabled. I also turn off ANY antivirus or secondary firewalls (double check to make sure they've stayed off, this includes any perimeter firewalls if used, note that in a corporate environment or where using something like a sonicwall appliance I do not turn this off unless I'm at my last resort). Once I've gathered all this information I check for inconsistencies between the different pc's and make any corrections. For example: For simplicity, ensure all pc's are on the same type network and network file sharing is enabled (you can make each type do what you want, but this is easier). Ensure ip addresses are in the correct range and gateways/dns servers are correct.

    2 - just for grins I turn everything off, everything, then turn back on starting with any router or modem, then whatever is providing dhcp if used (if it isn't the router or modem), then turn on the pc's. Check for any changes to the problem.

    3 - starting with one PC, make sure I can hit the Internet by visiting a page I am sure isn't cached (further diagnostics needed if this isn't possible, try pinging all other pc's using computer names (sometimes pinging is filtered by Windows firewall so if you can't ping, make sure it isn't filtered. If you can't ping at this point, it's beyond what I have time to write here at the moment.

    i have to head to work, but hopefully this is helpful in some way.


    mikele said: View Post
    Thank you for that but this services are already activated and run.

    I did NEVER had any network trouble or mapped computer vanishing with build 10240.

    At this time, I can NOT see all 3 other laptop connected... My 3 PC are not mapped and I can NOT access to them in any way including Printer this is VERY annoying.

    SHAME to MS and this SCRAP new Build
      My System SpecsSystem Spec


  5. Join Date : Jul 2015
    Dublin, Ireland
    Posts : 542
    Windows 1.00 to Windows 10 Pro 64-bit Build 14971.1000
       16 Nov 2015 #35

    On my Windows 10 Build 10586.3, My PC sees both my wife's PC and my PC. However I can't access the folders on my wife's PC.

    I've set up Homegroups on my wife's PC but mine says there is no other Homegroup available.

    On my wife's PC I can see mine but can't access it. Homegroups is enabled on her PC but mine doesn't show on her PC.
      My System SpecsSystem Spec


  6. Join Date : Oct 2015
    Posts : 7
    Win 10 64
       16 Nov 2015 #36

    Did you make sure your network is set to private? From my understanding both pc's will need to be set to private. Then once you set up a homegroup on one pc, the other pc will need to join that network. I believe if you have a homegroup set up on each individual pc, neither will be able to share with the other.
    I don't use homegroups so I'm just going on a little bit of data I read.
    I do believe (in win10 pro) you can also still right click on "this pc", select properties, then under "computer name, domain name, and workgroup settings, select "change settings". From there select the "change" button next to "to rename this computer or...", select the "workgroup" radio button and enter a workgroup name you want to use. Do this on each pc and you should be good to go.

    fjk61011 said: View Post
    On my Windows 10 Build 10586.3, My PC sees both my wife's PC and my PC. However I can't access the folders on my wife's PC.

    I've set up Homegroups on my wife's PC but mine says there is no other Homegroup available.

    On my wife's PC I can see mine but can't access it. Homegroups is enabled on her PC but mine doesn't show on her PC.
      My System SpecsSystem Spec


  7. Join Date : Nov 2015
    Posts : 16
    w10 x64 N
       16 Nov 2015 #37

    Thanks for that but you know unfortunately I already tried this all...

    I have my network since 25 years here with 3.1, 95, 98, xp, 8, 8.1, 10, 10 build 1511 TH2...

    All run fine before I install the last build W10 1511 the problem come from this last build...

    I have an other laptop with build 10240 and it see ALL my computers in my network (2 laptop W10 TH2, 1 laptop w10 build 10240 and my old Windows XP PC !!!)

    The laptop upgraded with last windows 10 1511 build see ONLY the other laptop with last build 1511 so I have only two mapped, two 1511build but this two 1511 build DO NOT SEE the other laptop w10 and the other with windows XP with Printer !!!!!!!

    I lost 3 days at this time to tweak all my network but NOTHING happens

    SHAME ON YOU MICROSOFT
      My System SpecsSystem Spec


  8. Join Date : Sep 2014
    Sydney NSW Australia
    Posts : 269
    Windows 10 Pro 64bit 1607 (14393.222)
       17 Nov 2015 #38

    I still have this issue. One with my insider builds from 10166 to 10586. This machine can see the Computers that are online but, my NAS and 2 networked drives it cannot see.
    On my main machine, this one, I have 10240 RTM and there is no issue with this at all and, I have added 10240 RTM to 3 other machines and they do not do this either.
    I believe that the ONLY way to have this fixed is for MS to do it? Whatever they did to the network discovery or a protocol, they NEED to fix it.
      My System SpecsSystem Spec


  9. Join Date : Nov 2015
    Posts : 16
    w10 x64 N
       17 Nov 2015 #39

    Today I try some things and from my 2 laptop with w10 build 1511 I can see my two other computers (XP and W10) with this command : \\computer name\...

    But them still stay NOT mapped in my network folder. I have to type this command each time I have to work on it.

    Big trouble with thresold 2 1511 build from the DEATH !
      My System SpecsSystem Spec


  10. Join Date : Jul 2015
    Dublin, Ireland
    Posts : 542
    Windows 1.00 to Windows 10 Pro 64-bit Build 14971.1000
       17 Nov 2015 #40

    mdrolle said: View Post
    Did you make sure your network is set to private? From my understanding both pc's will need to be set to private. Then once you set up a homegroup on one pc, the other pc will need to join that network. I believe if you have a homegroup set up on each individual pc, neither will be able to share with the other.
    I don't use homegroups so I'm just going on a little bit of data I read.
    I do believe (in win10 pro) you can also still right click on "this pc", select properties, then under "computer name, domain name, and workgroup settings, select "change settings". From there select the "change" button next to "to rename this computer or...", select the "workgroup" radio button and enter a workgroup name you want to use. Do this on each pc and you should be good to go.
    Ok, I've switched off my wife's PC and managed to set up the Workgroup folder on mine. In networks however two folders in my onedrive folder showup. They are labelled Important 1 and Important 2. They contain music and documents. It seems Build 10586.3 trawls the hard drives and adds folders containing documents , pictures etc. to the network. Strange behaviour.

    EDIT: As soon as I started up my wife's PC it broke the Homegroup on my PC.
    Last edited by fjk61011; 17 Nov 2015 at 12:01.
      My System SpecsSystem Spec


 
Page 4 of 29 FirstFirst ... 2345614 ... LastLast


Similar Threads
Thread Forum
i upgraded 2 computers to windows 10 and java doesnt work on both
i upgraded 2 computers to windows 10 and java doesnt work on both
Software and Apps
Business type workgroup Network
Finally installed Win10 on a computer with raw HD. It installed realtively easy. But I can not figure out how to setup a network to see two Win7 computers on a small business type workgroup. I disabled Homegroup since I am most comfortable...
Network and Sharing
Windows 9 Might Not Work on 32-Bit Computers Report
More
Windows 10 News
Steampunk computer computer cases/keyboards....
http://i.imgur.com/6tiV6Mo.jpg http://i.imgur.com/hDcLSPe.jpg http://i.imgur.com/5s8rLWI.jpg http://i.imgur.com/Q7UIuP6.jpg
Chillout Room
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:53.
Find Us
Twitter Facebook Google+



Windows 10 Forums