Connectivity issues that have to do with name resolution

Page 2 of 3 FirstFirst 123 LastLast

  1. Posts : 9,765
    Mac OS Catalina
       #11

    The ping does nothing. Still need the output of netsh wlan show all. If you are using the Netgear as a router behind the eMTA, you are always going to have problems. Also that device is no longer supported. If all that you want is better WiFi signal, get a Engenius ECB350 with a POE (Power Over Ethernet) module and then place it where ever you can connect it to a ethernet jack back to where the eMTA is.

    You can get up to 150' of coverage with that A/P. It is the same one that I use in my house. I have zero issues with it.
      My Computer


  2. Posts : 449
    win 10
       #12

    Try uninstalling the adapter and then rescan and let it reinstall
    Is the adapter using Windows drivers or vendor drivers?
    Does the internet work without issue when connected via LAN?
    Have you tried another browser, are you playing games via the browser?
      My Computer


  3. Posts : 33
    Windows 10
    Thread Starter
       #13

    robgr said:
    Try uninstalling the adapter and then rescan and let it reinstall
    Is the adapter using Windows drivers or vendor drivers?
    Does the internet work without issue when connected via LAN?
    Have you tried another browser, are you playing games via the browser?
    Thank you for actually answering my question!!! I will try that when I get home.
      My Computer


  4. Posts : 33
    Windows 10
    Thread Starter
       #14

    bro67 said:
    The ping does nothing. Still need the output of netsh wlan show all. If you are using the Netgear as a router behind the eMTA, you are always going to have problems. Also that device is no longer supported. If all that you want is better WiFi signal, get a Engenius ECB350 with a POE (Power Over Ethernet) module and then place it where ever you can connect it to a ethernet jack back to where the eMTA is.

    You can get up to 150' of coverage with that A/P. It is the same one that I use in my house. I have zero issues with it.
    Okay that's exactly why I told you which part of the command you needed to see. And no, I've only just recently had problems. I'll call for a replacement anyway, whatever. "If all that you want is a better WiFi signal" did you even read my post? Answering my questions is optional and you have the option of not helping me, so please don't, because you're not helping at all.
      My Computer


  5. Posts : 9,765
    Mac OS Catalina
       #15

    The whole output of netsh wlan show all needs to be posted. If it is not. There is no way to tell if it is a device issue, AP issue or Channel Congestion.
      My Computer


  6. Posts : 33
    Windows 10
    Thread Starter
       #16

    bro67 said:
    The whole output of netsh wlan show all needs to be posted. If it is not. There is no way to tell if it is a device issue, AP issue or Channel Congestion.
    Imgur: The most awesome images on the Internet
      My Computer


  7. Posts : 33
    Windows 10
    Thread Starter
       #17

    erk
    what do I do
      My Computer


  8. Posts : 9,765
    Mac OS Catalina
       #18

    You need to paste the output of netsh wlan show all in a post, not a picture on a hosting service.
      My Computer


  9. Posts : 33
    Windows 10
    Thread Starter
       #19

    That is the output. I can't copy/paste
      My Computer


  10. Posts : 33
    Windows 10
    Thread Starter
       #20

    bro67 said:
    You need to paste the output of netsh wlan show all in a post, not a picture on a hosting service.
    Nevermind, here
    Microsoft Windows [Version 10.0.10586]
    (c) 2015 Microsoft Corporation. All rights reserved.

    C:\WINDOWS\system32>netsh wlan show all
    Wireless System Information Summary
    (Time: 5/26/2016 7:35:53 PM Central Daylight Time)


    =======================================================================
    ============================== SHOW DRIVERS ===========================
    =======================================================================


    Interface name: Wi-Fi

    Driver : Broadcom 802.11n Network Adapter
    Vendor : Broadcom
    Provider : Broadcom
    Date : 6/2/2013
    Version : 6.30.223.256
    INF file : C:\WINDOWS\INF\netbc64.inf
    Files : 1 total
    C:\WINDOWS\system32\DRIVERS\BCMWL63a.SYS
    Type : Native Wi-Fi Driver
    Radio types supported : 802.11n 802.11g 802.11b
    FIPS 140-2 mode supported : Yes
    802.11w Management Frame Protection supported : Yes
    Hosted network supported : Yes
    Authentication and cipher supported in infrastructure mode:
    Open None
    Open WEP
    WPA2-Enterprise TKIP
    WPA2-Personal TKIP
    WPA2-Enterprise CCMP
    WPA2-Personal CCMP
    Vendor defined Vendor defined
    Vendor defined Vendor defined
    WPA-Enterprise TKIP
    WPA-Personal TKIP
    WPA-Enterprise CCMP
    WPA-Personal CCMP
    Authentication and cipher supported in ad-hoc mode:
    WPA2-Personal CCMP
    Open None
    Open WEP
    Wireless Display Supported: Yes (Graphics Driver: Yes, Wi-Fi Driver: Yes)


    =======================================================================
    ============================= SHOW INTERFACES =========================
    =======================================================================


    There is 1 interface on the system:

    Name : Wi-Fi
    Description : Broadcom 802.11n Network Adapter
    GUID : 553fc3eb-a942-4cff-ac34-8208fe9b3089
    Physical address : e0:06:e6:8d:73:1c
    State : connected
    SSID : MyCharterWiFi82-2G
    BSSID : c4:04:15:9a:a0:82
    Network type : Infrastructure
    Radio type : 802.11n
    Authentication : WPA2-Personal
    Cipher : CCMP
    Connection mode : Profile
    Channel : 4
    Receive rate (Mbps) : 72
    Transmit rate (Mbps) : 72
    Signal : 80%
    Profile : MyCharterWiFi82-2G

    Hosted network status : Not available


    =======================================================================
    =========================== SHOW HOSTED NETWORK =======================
    =======================================================================


    Hosted network settings
    -----------------------
    Mode : Allowed
    Settings : <Not configured>

    Hosted network status
    ---------------------
    Status : Not available


    =======================================================================
    ============================= SHOW SETTINGS ===========================
    =======================================================================


    Wireless LAN settings
    ---------------------
    Show blocked networks in visible network list: No

    Only use GP profiles on GP-configured networks: No

    Hosted network mode allowed in WLAN service: Yes

    Allow shared user credentials for network authentication: Yes

    Block period: Not Configured.

    Auto configuration logic is enabled on interface "Wi-Fi"
    MAC randomization not available on interface Wi-Fi


    =======================================================================
    ============================== SHOW FILTERS ===========================
    =======================================================================


    Allow list on the system (group policy)
    ---------------------------------------
    <None>

    Allow list on the system (user)
    -------------------------------
    <None>

    Block list on the system (group policy)
    ---------------------------------------
    <None>

    Block list on the system (user)
    -------------------------------
    <None>


    =======================================================================
    =========================== SHOW CREATEALLUSER ========================
    =======================================================================


    Everyone is allowed to create all user profiles.


    =======================================================================
    ============================= SHOW PROFILES ===========================
    =======================================================================


    Profiles on interface Wi-Fi:

    Group policy profiles (read only)
    ---------------------------------
    <None>

    User profiles
    -------------
    All User Profile : MyCharterWiFi82-2G


    =======================================================================
    ========================== SHOW PROFILES NAME=* =======================
    =======================================================================


    Profile MyCharterWiFi82-2G on interface Wi-Fi:
    =======================================================================

    Applied: All User Profile

    Profile information
    -------------------
    Version : 1
    Type : Wireless LAN
    Name : MyCharterWiFi82-2G
    Control options :
    Connection mode : Connect automatically
    Network broadcast : Connect only if this network is broadcasting
    AutoSwitch : Do not switch to other networks
    MAC Randomization : Disabled

    Connectivity settings
    ---------------------
    Number of SSIDs : 1
    SSID name : "MyCharterWiFi82-2G"
    Network type : Infrastructure
    Radio type : [ Any Radio Type ]
    Vendor extension : Not present

    Security settings
    -----------------
    Authentication : WPA2-Personal
    Cipher : CCMP
    Security key : Present

    Cost settings
    -------------
    Cost : Unrestricted
    Congested : No
    Approaching Data Limit : No
    Over Data Limit : No
    Roaming : No
    Cost Source : Default


    =======================================================================
    ======================= SHOW NETWORKS MODE=BSSID ======================
    =======================================================================


    Interface name : Wi-Fi
    There are 3 networks currently visible.

    SSID 1 : MyCharterWiFi82-2G
    Network type : Infrastructure
    Authentication : WPA2-Personal
    Encryption : CCMP
    BSSID 1 : c4:04:15:9a:a0:82
    Signal : 89%
    Radio type : 802.11n
    Channel : 4
    Basic rates (Mbps) : 1 2 5.5 11
    Other rates (Mbps) : 6 9 12 18 24 36 48 54

    SSID 2 : HP-Print-B7-LaserJet 1102
    Network type : Infrastructure
    Authentication : Open
    Encryption : None
    BSSID 1 : 00:71:cc:32:d6:b7
    Signal : 0%
    Radio type : 802.11g
    Channel : 6
    Basic rates (Mbps) : 6
    Other rates (Mbps) : 9 12 18 24 36 48 54

    SSID 3 : ATTgAWUSBA
    Network type : Infrastructure
    Authentication : WPA2-Personal
    Encryption : CCMP
    BSSID 1 : 64:55:b1:6c:25:d0
    Signal : 30%
    Radio type : 802.11n
    Channel : 11
    Basic rates (Mbps) : 1 2 5.5 11
    Other rates (Mbps) : 6 9 12 18 24 36 48 54


    =======================================================================
    ======================= SHOW INTERFACE CAPABILITIES ===================
    =======================================================================


    Wireless System Capabilities
    ----------------------------
    Number of antennas connected to the 802.11 radio (value not available)

    Max number of channels the device can operate on, simultaneously (value not available)

    Co-existence Support : Unknown


    Wireless Device Capabilities
    ----------------------------

    Interface name: Wi-Fi

    WDI Version (Windows) : 0.0.0.0

    WDI Version (IHV) : 0.0.0.0

    Firmware Version :

    Station : Supported

    Soft AP : Supported

    Network monitor mode : Supported

    Wi-Fi Direct Device : Supported

    Wi-Fi Direct GO : Supported

    Wi-Fi Direct Client : Supported

    Protected Management Frames : Supported

    DOT11k neighbor report : Unknown

    ANQP Service Information Discovery : Not Supported

    Action Frame : Not Supported

    Diversity Antenna : Unknown

    IBSS : Supported

    Promiscuous Mode : Supported

    P2P Device Discovery : Not Supported

    P2P Service Name Discovery : Not Supported

    P2P Service Info Discovery : Not Supported

    P2P Background Discovery : Not Supported

    P2P GO on 5 GHz : Unknown

    FIPS : Supported

    Instant Connect : Not Supported

    Dx Standby NLO : Not Supported

    Extended Channel Switch Announcement : Unknown

    Function Level Reset : Not Supported

    Platform Level Reset : Not Supported

    Bus Level Reset : Not Supported

    MAC Randomization : Not Supported

    Fast Transition : Not Supported

    MU-MIMO : Unknown

    Miracast Sink : Unknown

    BSS Transition (802.11v) : Unknown

    IHV Extensibility Module Configured : Not Supported

    Number of Tx Spatial Streams : 0

    Number of Rx Spatial Streams : 0

    Number of Concurrent Channels Supported : 2

    P2P GO ports count : 1

    P2P Clients Port Count : 1

    P2P Max Mobile AP Clients : 128

    Max ANQP Service Advertisements Supported : 0

    Co-existence Support : Unknown



    C:\WINDOWS\system32>
      My Computer


 

  Related Discussions
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 17:08.
Find Us




Windows 10 Forums