1.    23 Oct 2015 #1
    Join Date : Oct 2015
    Posts : 3
    Windows 10

    Windows 10 Unidentifed Network

    Just took out Virgin Media 100mb Broadband and not able to connect with an ethernet cable, running windows 10 64 bit i plug my ethernet cable into my router and the other end into the PC and at the bottom of the clock it says unidentied network and i cant get any internet the router and computer is are both lit up when i plug the cable in.

    Wireless works ok but only getting 20mb download and 6 upload
      My System SpecsSystem Spec

  2.    23 Oct 2015 #2
    Join Date : Apr 2014
    Posts : 3,276
    W10 Pro x64/W7 Ultimate x64 dual boot main - W10 Pro Insider Preview/W7 Pro x64 - remote pc

    I have the opposite situation on the secondary remote pc here where 7 will connect wirelessly by way of a usb WiFi adapter but not by the Cat 6 ethernet cable while 10 lacking any adapter driver for the Cisco router's usb adapter connects instantly by hard wire! The same for the main build as well.

    The first step would be cleaning up the DNS cache and dumpling all pre-existing network adapter listings in the Network&Sharing Center found in the Control Panel as well as disabling the existing WiFi network adapter in the Device Manager. When powering down not after powered up is when to have first connected the ethernet cable and you actually don't want to be seeing anything WiFi since that is preventing the hard wired connection from being detected properly and set by Windows as the default connection.

    Once you have eliminated all the items in the Network adapters part of the Network&Sharing Center you will want to open up the Command prompt(admin) option and type in "ipconfig /release" to release all IP and MAC private addresses and followed the "ipconfig /flushdns" command to insure the fresh detection of the ethernet connection. Once those two are seen as successful you then type in the 3rd and last command "ipconfig /renew" to see if that will then establish the fresh connection.

    Once you close the command prompt up you might have to see a few full system restarts before things will actually take. With a laptop I recently upgraded to 10 from the preinstalled 7 7 had lost the opposite being a WiFi connection at another location when bringing the laptop home to service for someone else.

    The connection here was immediate naturally but left the other place hanging! Following he upgrade and clean installs of 10 to follow the first few trips saw the connect to private network realized but no go on getting on the web! Upon the last two visits suddenly all is well! 10 now properly synced itself with the private network and freely connects to the web upon those first few trips trying to debug things. Likewise once you get everything cleaned up you may find the connection was freshly detected and established for you automatically.
      My System SpecsSystem Spec


Similar Threads
Thread Forum
Network Map not showing all network machines
I have just upgraded 4 W7 machines to W10 to add to our 8 pc LAN. On checking the network map only the same 3 of the 8 are showing. I have pinged with IP and name and obtained a result, also checked advanced sharing settings and all correct and same...
Network and Sharing
Network Adapter Ok in Device Manager not in network connections etc
So originally I upgraded my mini PCI card and was trying to get that working... It was recognized in the device manager but not the network connections.. I could not see the adapter to use or enable/disable etc despite having the drivers up to date....
Network and Sharing
network issues, unable to enter network credentials
I upgraded two desktops to Win 10 (one from Win 7 and one from Win 8.1). I have issues with setting up a network. First, I tried to set up a homegroup and I failed (i already posted another question on this subject with no luck so far). OK,...
Network and Sharing
WiFi Windows 10 upgrade after making 2 (Network adapter), the network
28883 My pc wifi 2 adapter network no screnn :(
Network and Sharing
No longer see Network Attached Storage in Network View on Build 10049
I can no longer see my Network Attached Storage in this build(10049) Enterprise. I have Network Discovery enabled and can get to the device by IP Address in a browser but am unable to map a drive to any share. Anyone else having these issues. I have...
Network and Sharing
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd
All times are GMT -5. The time now is 07:02.
Find Us
Twitter Facebook Google+

Windows 10 Forums