1. Join Date : Oct 2016
    Posts : 5
    windows 10
       27 Oct 2016 #1

    clean install on new build, but system won't reboot


    I built a desktop. Asus Z170, Intel I7 6700, Geforce GTX 1060. Everything appears to work, system boots to bios.
    I did a clean install of Windows 10 pro from a USB stick, it installed and windows appeared on the screen. I am able to surf, do updates, play around... it's all good until I restart/reboot. I get a black screen. I can access bios normally though (f2). I have tried changes in the CMS, legacy, and UEFI in the bios. The results ranged from nothing to popping the CMOS battery for a hard reset.

    Can anyone help me? Cheers
      My System SpecsSystem Spec


  2. Join Date : Oct 2014
    New Jersey
    Posts : 626
    Windows 7 Pro x64 Windows 10 Pro x64
       27 Oct 2016 #2

    Since you made a bunch of unnecessary changes to the bios, reset the bios to defaults (F5) save changes (F10) and exit, see if windows will boot.

    What model Asus board did you get ?

    And Welcome to Ten Forums
      My System SpecsSystem Spec


  3. Join Date : Oct 2016
    Posts : 5
    windows 10
       27 Oct 2016 #3

    Bios has been reset. Asus Z170. Forgot to mention, SSD 500GB Samsung EVO.
      My System SpecsSystem Spec


  4. Join Date : Oct 2014
    New Jersey
    Posts : 626
    Windows 7 Pro x64 Windows 10 Pro x64
       27 Oct 2016 #4

    What Z170 ??

    There are 20 versions

    Intel platform | Motherboards | ASUS USA


    Have you tried a startup repair yet ?

    Startup Repair - Run in Windows 10 - Windows 10 Forums
      My System SpecsSystem Spec


  5. Join Date : Oct 2016
    Posts : 5
    windows 10
       27 Oct 2016 #5

    Z170-E (missed it typing) RAM gskill ripjaws 2x16GB

    Can I do the start up repair from Windows? At this point, I have to go through the install process every time. It completes, but that is as far as I get.
      My System SpecsSystem Spec


  6. Join Date : Oct 2014
    New Jersey
    Posts : 626
    Windows 7 Pro x64 Windows 10 Pro x64
       27 Oct 2016 #6

    No, you can not do a startup repair from windows.

    You have to boot from your usb stick.

    And here`s another tutorial to look over.

    Recovery Environment - Use to Troubleshoot Windows 10 Failure to Boot - Windows 10 Forums


    If this keeps happening, I would think maybe your installer is corrupt.

    Download a fresh iso and create a new installer.

    Windows 10 ISO Download - Windows 10 Forums

    USB Flash Drive - Create to Install Windows 10 - Windows 10 Forums
      My System SpecsSystem Spec


  7. Join Date : Sep 2014
    DFW Area
    Posts : 365
    Windows 8&10
       28 Oct 2016 #7

    Were you using the x64 bit version of Win 10 and did you have a license with it?

    I assume you installed in the UEFI configuration... do you know for sure?

    Was the black screen completely blank or was there a flashing cursor in the upper left?

    Did you remove the install media?
      My System SpecsSystem Spec


  8. Join Date : Oct 2016
    Posts : 5
    windows 10
       28 Oct 2016 #8

    AddRam: I reformatted, reinstalled, read the posts provided, created the recovery USB for startup repair, etc. Install again went well. This time I shutdown vs having restarted earlier. It worked. I shutdown once or twice more with no issues, then I hit restart - black screen. This was the fourth time I went and redid the installer and have made the USB stick more time than I care to admit.

    Saltgrass: Yes, 64 bit licensed, UEFI config confirmed, full black no cursor, only access to bios, install media removed.

    Both: I had and LED monitor from Walmart (no judging it was open late) and as I bought it temporarily, I returned it today and bought an LG 24MP56 from Costco. I plugged it in, reset the mobo (cmos battery and drain). I disabled the Fast Boot option in the bios and things started fine. The computer has now restarted itself once through install processes and seems ok. Keeping my fingers crossed, but I won't feel confident until I use the restart a few times with normality.
      My System SpecsSystem Spec


  9. Join Date : Oct 2016
    Posts : 5
    windows 10
       28 Oct 2016 #9

    Guys, it worked. The only two things I changed were disabling the Fast Boot and a different monitor.

    Appreciate you taking the time to help out!
      My System SpecsSystem Spec


  10. Join Date : Jun 2014
    Posts : 4,326
    Windows 10 Pro
       29 Oct 2016 #10

    There is one setting in Windows 10 that I have trouble with is Fast Startup. If you want to turn it off it's in Power Options- Choose what the power buttons do.
      My System SpecsSystem Spec


 


Similar Threads
Thread Forum
I get just a blank screen after reboot doing a clean install of Window
This is the last out of three that I'm upgrading. I followed the "How to Directly Clean Install Windows 10 without having to Upgrade First". I get Windows 10 installed it updates and I copy the GenuineTicket.xml. I get a message that I need to...
Installation and Setup
New install on clean hardware, 64bit, endless black screen on reboot
Win 10 installs and opens the first time. Once it gets reset (it automatically starts downloading updates and requires a reset), it boots back to a black screen where nothing happens. I tried repair, etc. from the Win10 installation DVD, but it...
Installation and Setup
Clean W10 Install, Can't Restore System Image
I created an image of my tower a week or two ago. I decided to restore to said image, but cancelled it. I went to boot it up later, and I received an error that there was no OS. I reasoned that it would be fine to reinstall and then restore. I got...
Performance & Maintenance
Solved No System partition on new clean install
I did a clean install build 10130 on separate (MBR) ssd. All other ssds (Win 7 and Win 8.1) were unplugged. I ended up with no "system" partition. I use the Win 8.1 ssd as the first in the boot order and this drive has a "system" partition from an...
Network and Sharing
Solved just about to clean install from build 10074
I am just about to clean install from build 10074. I assume that it will update to the latest build once installed. I was wondering if I need to install drivers and wot not before upgrading via WU or do that after the upgrade to 10130 is compete.
Installation and Setup
Our Sites
Site Links
About Us
Windows 10 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 10" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 15:44.
Find Us
Twitter Facebook Google+



Windows 10 Forums