multi boot splash page control

I suspect you have both windows on separate disks and you are choosing from BIOS options.
I'm doing it with 3 disks and 3 OSs. I installed EasyBCD 2.3 Download - TechSpot on disk0 and made a unified boot menu with it, quite easy.

CountMike said:

I suspect you have both windows on separate disks and you are choosing from BIOS options.
I'm doing it with 3 disks and 3 OSs. I installed EasyBCD 2.3 Download - TechSpot on disk0 and made a unified boot menu with it, quite easy.

CountMike,

I have always thought that Microsoft requires that Windows partitions be located on Drive 0 (or Drive 1 if that is the first drive number).

If I understand you correctly, then I can have Windows installed on 2 or more different drives on my system, and EasyBCD will find them. And when I restart my system, the EasyBCD menu will include all of those Windows partitions. If this is true, then Woohoo.

And without playing around in the BIOS with selecting the right boot drive???

Add to that the fact that EasyBCD will boot non-Windows partitions, and I could be one very happy camper.

There are several factors that define BOOT order.
On the MB you can have several SATA ports. For instance SATA3_0, SATA3_1 etc. Some even SATA2_0, eSATA3_0 etc. Left at default BIOS would choose device at SATA3_0 as first BOOT device and subsequently others if nothing found on first. Which one is first can be defined in BIOS. If you have several disks with BOOT sector you can chose which OS to BOOT from.
Other way would be to install a menu on a disk/OS that is defined by BIOS to be first BOOT device and let it BOOT from it. Menu will let you chose any other OS located on other disk(s).
There are several ways to make that menu, one of them (and I think easiest and with many options) is EasyBCD, It's not automatic but easy to use, just choose which other system you want to add to boot menu and on which physical disk it's located. You can change name of it, time to display etc. There's good help and manual for it, no rocket science. Easier and safer than to manually enter and change windows BCD, hence the name EASY bcd.
It's only important to install it and set it on windows located on first to boot disk defined in the BIOS and keep on using it in that configuration. Although.... you can do it on second disk/windows too so even if you change BOOT order in BIOS you still get a menu.

Mike,

Thanks. I gave you a Thumbs Up for this answer. EasyBCD is my way forward. (Not trying to get into "religious" debates about multi-booting vs. VMs here.) Several years ago, I was experimenting with a number of multi-boot products and they are just over-complicated. EasyBCD sounds so much easier. With booting non-Windows systems and booting from multiple disks, it's exactly what I need.

You need to install it and use it on both disks if you want to change order thru BIOS.